BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Bottle of 58 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S (25PPM) and CO (100PPM).
Bottle of 34 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S(25PPM) and CO (100PPM).
fall arrest block, 6 metre webbing strap, with external shock absorber. Housing made of plastic. Rotating snap hook ensures that the webbing strap does not become twisted. Suitable for vertical (max. 140kg) and horizontal (fall factor 1, max 100kg) use, as well as use with sharp edges.
Safety glasses in polarized Polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (21g). Foreseen of a an adjustable nose bridge and TIPGGRIP temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging. Protects against UV-radiation.
Low shoe, extremely lightweight in velours S1, with ventilation openings. With a plastic 200J toecap. Lining in breathable textile and insole that is removable and moisture/shock absorbing. Sole in PU / PU. Available in 2 widths. Sizes: 35-43. Width measurements: 10, 11.
Folding mask, class P2, for harmful dust. Comfortable 3-piece folding mask. With non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 10.
Hi-vis jacket in 65% polyester/35% cotton (245g/m²). Zip closure under flap, removable ID badge, phone pocket, pen pocket, chest pocket, elasticated waist. Available sizes: S-3XL. Available colours: hi-vis yellow/navy.
•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending
Visor in clear PC for V-GARD 950. Marking: 1 B 8-1-0 9 K N.
Oval carabiner made of aluminium Manual closure of the locking mechanism. Opening: 20 mm. Resistance: 25 kN. Weight: 92g.
Cut and heat resistant arm protector 45 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
The Talia signalisation raincoat was therefore especially designed for them. With ergomic sleeves, underarm ventilation, an elastic cord at the waist and an elastic wristband with narrowing by means of Velcro closure was thought to comfort. The practical side also thought about a removable hood with elastic cord that can be stored in a special bag on the inside, 2 stuffed things, 1 sleeve pocket and 1 inside pocket. Quality: Siopor® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g / m². Available sizes: XS-2XL. Available colors: Fluo yellow and fluo orange. Complies with: EN ISO 20471 class 3 and EN 343 class 3: 3.
First-aid kit Multi without filling incl. Wall holder. Dimensions: 43 x 31.5 x 15.5 cm. Weight: 2750 gr.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
Sweater bicolor seams: Round neck, Sleeve cuffs, Dryer resistant, American fleece, Cotton/Polyester, Bi-colour, Bicolour, Sweaters, 60 °C, Construction, Pa inters <(>&<)> Plasterers, Transport <(>&<)> Logistics, Bicolour Seams, 60°C washable. Quality: 70% Cotton / 30% Polyester, 280 g/m². Available sizes: XS-8XL. Available colors: Navy/Royal Blue, Navy/Black, Black/Grey, Black/Orange, Black/Red and White/Black.
The STRATO VENT helmet is lightweight, comfortable, and secure thanks to the CENTERFIT and FLIP&FIT systems. Its adjustable chinstrap and ventilation openings make it suitable for both work at height and on the ground. Fully modular, it can be equipped with accessories such as a headlamp or hearing protection. The high-visibility version ensures optimal visibility, both day and night.
Standard fall harness with straight leg straps and 2 attachment points (back and chest). Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with buckle through buckle closure. Tires made of water and dirt-resistant polyester. Fall indicator front and back.
Perforated, absorbent black sweatband made of nylon for Centurion safety helmets Reflex, 1125 and Vulcan. separately certified as PPE.
The Browguard with slip ratchet can be used to hold a wide range of face shields. Compatible face shields include the S580 (170 mm polycarbonate) / S590 (225 mm polycarbonate) / S591 (225 mm acetate) / S592 (225 mm acetate anti-fog) / S592AEA (225 mm acetate anti-fog <(>&<)> anti-arc) / S593 (225 mm green acetate). You can also choose from face shields S910 (150 mm polycarbonate) / S911 (150 mm acetate) / S912 (150 mm acetate anti-fog) which are suitable for attachment of an optional chin piece (S91C) to protect the entire face.
Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F
Glove with excellent grip in oily environments, preventing slippage and injuries. Triple-coated with nitrile foam in the palm, for a solid oil barrier. Lining with 18 gg knitting technique and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.X.1.1.A - EN 407:2020: X.1.X.X.X.X
Firefighter boot with chainsaw protection (class 2) in black water and firerepellant PBI fabric and microfiber, with a synthetic ant iperforation sole and composite 200J toecap. Reflectors on both sides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
Trousers, aluminized carbon/para-aramide, 540 gr./m², lining in cottonProban, fly-closure with press-studs, 2 side slits under flap, seams stitched with Kevlar ®. Sizes: M - XXL.
Post and cement base red/white, height 90cm. Chains and ribbons can be attached to control foot traffic.
Hood for welders, 100% cotton Proban®, 340gr./m²,flameretardant,quilted flameretardant wool on the top,a cord closure around the face. Sizes: 1 size.
Overboot in ultra chemical resistant and antistatic material (Hazmax). Outsole in vulcanized rubber, with a perfect slip resistance, oilresistant and heatresistant up to 300°C. Forseen with a heel part, excellent for climbing ladders. Fixing by rubber strap for a perfect fit, wide shaft for ease entry and fitting.
Replacement inox knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
The real remanent air-purifying spray. Natural and very powerful, for a fresh and clean atmosphere. Each spray dispenses 0.11 ml of solution and treats an area of 20m³. Also suitable for combating microbial particles in the air. Viruside test results available upon request. Use biocides safely. Always read the label and product information before use.
Adjustable Nylon Cord for spectacle. No PPE.
Innovative protective spectacle, perfectly fit the face. Individually adjustable side arms with variable inclination. Integrated Softflex zone ensures outstanding wearer comfort for all head sizes. Softflex nose piece ensures comfortable, pressure-free fit and remain firmly in place. Soft ear and Softflex bridge pieces ensure a secure fit in any situation. Supravision Plus coating: anti-fog on both sides, scratch- resistant and antistatic.
Safety helmet with integrated eye protection made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Cobra safety spec has an anti-slip temple and adjustable branches. Grey CSP polycarbonate lens with anti-scratch and anti-fog coating (Platinum).
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
Sandal S1P in black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35- 52.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 406 mm.
High boot in waterresistant full grain leather. Fitted with a Sympatex liner. Outsole in 100% rubber, oil and carburant resistant. Removable, antibacterial polyurethane insole. Sizes: 35-50.
Shift work trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, Cordura® knee pockets, 1 back pocket with concealed press stud fastening, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% polyester / cotton, 2/1 twill weave, 245 gr / m². Available sizes: 44-66. Available colors: Navy / gray, black / gray, and charcoal gray. Compliant with: EN 14404.
Bib and Brace with two holster pockets that can be tucked into the side pockets, one with an extra pocket and one with tool loops. Adjustable elastic braces. Spacious front pockets for phone and papers. Leg pocket with attachment for ID-card. Back pockets with flap and Velcro closure. Reflective piping on outside leg. Reinforcements on the holster pockets, folding rule pocket and on knees. Internal pockets for knee protectors, adjustable in two height levels. Size C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton 245 g/m2. Available Sizes: C44-C62, D96-D120, C146-C156. Available colors: Black, navy, khaki, grey, sky blue, red and forest green.
Functional jacket: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inner pockets • adjustable cuffs. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black.
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray, Black / gray and gray / yellow. Conform: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1 D0 E0 F0, EN IEC 61482-2 class 1.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
White clog made out of microfiber with steel toecap. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 460 mm Certified Category R/C. Arc Flash score EBT: 88 cal/cm²
Low-cut shoe made of velours, fitted with a 200J toecap. With liner in Climazone in antiperspirant textile and comfortable insole providing extra protection against mildew and heat. Sole made of PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Inherently flame-retardant metal-free switch pants. The pants have a zipper over the full length of the legs (outside) and are made of supple, wind- and water-resistant softshell material. Removable braces with fix-lock closure. Loops at the waist. Side pockets with flap. Front pocket with flap. Two-way zipper in the legs. With comfortable heat seal reflection. Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B2 C2 F2, IEC 61482-2 APC 2 (ELIM: 40.0 cal/cm² EBT: 44.0 cal/cm²), EN 1149-5, EN 13034 type PB[6] and EN SO 20471 class 1.
Emergency first aid kit Industry is supplied with a wall holder. This first aid kit is specially composed to meet the needs of the "workshop". Dimensions: L 44.5 cm x H 32 cm x D 15 cm.
Beannie Result: 100% knitted soft feel acrylic; short fashionable model; reversible; with contrasting color on the bottom edge and inside.
Cooling vest based on PCM technology to reduce heat stress and fatigue occur in very hot areas. Provides constant cooling at 3 different temperatures. Exterior: Robust canvas material, polyester mesh lining. 4 pockets for cooling packs. adjustable waist, zipper. Supplied without cooling packs. Available sizes: S-3XL. Available color: black.
Sponge sweatband for welding helmet G5-01. Packaged in sets of three. Not separately certified as PPE.
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Red hearing protector with neck band. Attenuation: SNR 35. Material: plastic. Features: allows simultaneous use of helmets or other head wear. Sizes: universal. Applications: pneumatic machines, compressors.
Protective lens for the inside of Speedglas welding cassette 9100XX(i), G5-01VC and G5-03VC. Not separately approved as PPE.
Replacement earplugs for Bilsom Percap 5720 banded earplugs.
Cooling Towel: Dampen this synthetic chamois to create a cooling aid significantly colder than ambient air. Advanced PVA material holds water without feeling heavy. Super-evaporative, feels significantly cooler than ambient air.
Alcohol testers with single-use mouthpiece. Compliant with Belgian legislation, with instructions in 3 languages: NL/FR/DE. Available in packs of 150 units.
Fabric neck protection, recommended accessory for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. Can be used if a fabric neck protector is preferred or if the standard version constantly touches the chest when welding in downward looking position.
