BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Rebel fall-prevention device with 15 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from the fall-protection mode to the rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Charger for 4 batteries.
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti-fog coating.
Flame retardant and antistatic fleece in 50% Protex/32% cotton/16% polyester/2% negastat (AST) (350g/m²). Full zip closure, straight collar, 2 front pockets with zipper, elongated back. Available sizes: S- 3XL. Available colours: navy.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, mercury vapour and particulates.
PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR, B-S-WR and pheos alpine (+adapter) and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.
Flame retardant work jacket with increased visibility in a light and comfortable cloth with high tear resistance. Concealed zipper with press studs front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Completely metal-free. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Complies with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6.
This warm and comfortable acrylic beanie hat features a removable LED front light for superior visibility in low light conditions. The rechargeable LED can be charged in a USB port. Portwest torches are designed for a wide array of tasks, from security to everyday use. Offering a versatile selection of lighting and accessories that provide excellent performance for an extensive array of tasks and duties. CE certified. Run time 2/4 Hours. Brightness 150 Lumens. Function: High-Medium-Flash. Beam Distance 10m (high), 5m (medium). USB Rechargeable Battery Included. 9 gauge liner for dexterity.
Low shoe in waterproof leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, waterresistant Gore-Tex liner. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-51.
Arc flash protection for the toughest conditions, will not drip, melt or ignite. Made from durable and comfortable materials. Seamless knitted liner of glass fibre, para-aramid, meta-aramid, nylon and spandex with a smooth finish mixed coating of nitrile, chloroprene. With plastisol prints on the back of the hand for extra protection. Sizes: 6-12.
High shoe with brown water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Being visible and staying warm, this is what the Sparrow offers you. This robust winter hi-vis jacket has a comfortable, warm, removable fur lining. The fur collar and sleeves, with knitted wind cuffs at the sleeve ends are removable. With an inner pocket and many outside pockets, including a phone pocket, pen pocket and a loop for a badge, you are never short on storage space. Quality: 80% polyester + 20% cotton; ± 280 g/m². Available colors: Hi-Viz orange and hi-viz yellow. Available sizes: XS–4XL.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements M-Move - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Women's Casma trousers with ARC protection: Closure with 1 hidden button / Front fly with zipper 2 inset pockets with flap and press stud fastening 1 ruler pocket with flap closed by hidden press studs elastic waist knee pockets Waistband with belt loops Double stitched (2x2) flame retardant reflective striping (50mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56. Available colors: Navy. In accordance with: IEC 61482-2: 2009 Class 1- ATPV 15.2 cal/cm², EN ISO 11612: 2015 / A1A2B1C1E3F1, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: 2005 + A1 : 2009 Type PB [6].
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
High shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breat hable, abrasion resistant 3D liner in textile. UTURN closing system. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Premium quality boot covers made of split cowhide leather. The strong material protects the feet and lower legs when welding and is designed to last in the toughest environments. Class 2 welding protection Designed with a comfort fit Designed to be worn in a tough work environment CE certified This product is sold in pairs UKCA marked Shell Fabric : Split Cowhide Leather, thickness 1.3 mm Available sizes: one size
Sportive glasses. Fitted with temple ends and nose with non-slip components. Temples consist of 45% recycled material (PCR & PIR) and 22% recycled PET. Equipped with clear polycarbonate lenses that consist of 71.5% mass balanced polycarbonate.Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside. Frame: black/green. PCF (Product Carbon Footprint) = 0,10kg CO².
Light, flexible banded earplugs made of a single piece, easy to wear around the neck. Caboflex is made of dimensionally stable plast ic and is perfectly washable and reusable. Excellent protection against universal noise.
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
The INUTEQ-DRY® Bodycool Smart X is a high-quality cooling vest based on evaporative cooling. Simple to activate by filling with max. 500ml clean water. The cooling effect can last from 8 hours to up to 3 days, depending on the ambient temperature, humidity and amount of airflow on the body. Available sizes: XS-XXL Available colours: black, gray and yellow
T-shirt from the Progression collection, enhanced visibility EN17353.
Half-zip sweatshirt from the Progression collection, enhanced visibility EN17353.
Cold resistant gloves with a creative combination of high-tech, breathable materials (Hipora) and very high tactility. Lining with 40g of 3M Thinsulate®. The palm also has a double reinforcement. Touch screen-capable thumb fand index fingers. Sizes: S / M / L / XL / XXL.
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
Oval snap hook made of steel. Automatic closure of the locking mechanism provides extra safety. Opening: 18 mm. Resistance: 25 kN. W eight: 180g.
Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.
Hood for welders, 100% cotton Proban®, 340gr./m²,flameretardant,quilted flameretardant wool on the top,a cord closure around the face. Sizes: 1 size.
Standard casing for hand wheel valves. Not PPE.
Reusable cold / hot pack. Helps with sprains, muscle tears, bruises and headaches etc. The cold / hot pack cannot be placed directly on the skin when used due to use. Freezing or burning symptoms (use the supplied Velcro bandage for this).
Very light sportive low shoe in microporous washable leather and lining in mesh nylon for more comfort. Outsole in very light material EVA, SRA anti-slip. Sizes: 40-46.
P3 filter with thread connection EN148-1 in ABS housing.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
High ranger shoe in Hypertex with Putek technology, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, waterresistant Tepor membrane. Outsole in Vibram, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Premium sweater with hood and 2 side pockets which can be closed with a zipper. This item also has an arm pocket that can also be closed with a zipper. The inside of this sweater provides extra comfort. Quality: 80% Combed Cotton / 20% Polyester, American Fleece, 300 g / m. Available sizes: XS-3XL. Available colors: Navy, Bordeaux, black and gray.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 350°C for 15 sec.
Coverall with a focus on safety and comfort. Characteristics include knee pockets, back fold and adjustable cuffs. In addition, there are functional pockets and a hammer loop. Hi-Vis reflective striping on the chest, arms and legs to be clearly visible. Quality: Kingsmill 245g (65% polyester / 35% cotton). Available colors: navy and black. Available sizes: S-4XL.
Tunic, tencel / polyester, 195 gr./m², height 72 cm and short sleeves. Available sizes: 0-6. Available colors: Black / gray, gray / black and blue / black.
Ventilated forest trousers class 3 type A. To compensate for the higher weight and especially the higher heat accumulation associated with a higher protection class 3, these BasePro chainsaw pants are equipped with a ventilating mesh at the back of the legs. Zipper and 1 button closure; 2 deployed pockets; 1 patched back pocket; 1 patch pocket for pleoimeter and system for fixing the spark plug key; Elastic waist with belt loops and suspender loops with velcro (ref. 5SD4); Lumbar top with suspender loops; 3-needle stitching on the back to the cross. Quality: 65% PES / 35% cotton. Available sizes: XS-2XL. Available colors: Gray / black. Compliant with: EN 381-5: 1995 / Class 3 - 28 m / s design A and EN ISO 13688: 2013.
Light and allround safety knife, automatic blade retraction. Suitable for left- and right- handed people. With a non-slip soft grip on the slider, handle is made of glass fibre reinforced plastic, cutting depht : 17mm. Changing blades is easy and safe. Replacement blade: 65232 (1023415)
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Short zip sweatshirt in metal and ribbed cuffs and hem. Two front pockets. Quality: 80% ecological Fairtrade cotton, 20% recycled polyester, 280 g/m². Available sizes: S-4XL.
Compact personal alarm for lone workers and company first responders. The personal alarm can be used to alarm and to receive alarm messages. You can alarm by pressing the emergency button, by pulling the neck cord, via the man down function when there is no movement or lying position and via the timer function. The device has a talk-listen connection so that communication can also be done via speech. The TWIG Neo features GPS/GNSS for outdoor location determination. The personal alarm is often used by company first responders, deposit service technicians and healthcare professionals. The device can be worn around the neck and on the belt. The TWIG Neo comes with belt clip, charger and charging cable.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. Available sizes: 44-64, 84-120, 146-156 SCA. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.
Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Compatible with (1038817 KINRIEM 4-PUNTS VR EVOLITE/EVO). Available in: white, blue, red, white/smoke, blue/smoke, black/smoke, orange smoke and green/smoke.
The Com4-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 200 pairs, each pair in a separate bag. Colours: light orange.
Replacement hood for hood S-655.
Replacement earplugs for X-cap (1015672 en 1032428). Sold in a bag of 5 pairs. Available in: lime yellow.
The Peltor Clean HY100A is a hygienic solution... A replaceable, self-adhesive, absorbent paper coating that is applied to the sealing rings. For use in hot or dirty environments, or when the ear defenders are being used by different people. Pack of 100 sets. No PPE, only to be used in combination with Peltor earphones.
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 4.5 kg. Cord 30m available (art. 1032349).
JALCORAIL from the J-QUARTZ range from Jallatte is a low safety shoe, has a Shaft made of microfibre and TEX-TEC. iIs antistatic, has a sole made of polyurethane J-Quartz, equipped with the JAL'GRIP system and a safety toe cap made of composite Xetane B and perforation-resistant sole. EN ISO 20345:2022 A1:2024 From 35 to 48
The safety shoe features a fibreglass toe cap and a flexible FAP® midsole. In addition, the shoe offers TPU protection in the heel and toe area, is metal-free and ESD-safe. The upper consists of durable microfibre with breathable Sandwich Mesh, while the lining is made of BreathActive functional lining. The footbed features evercushion® technology. The sole of the shoe, the MOTION PWR, is heat-resistant up to 300°C and has a slip-resistant rubber outsole with a PWR.FOAM midsole for excellent cushioning, energy return and stability.
Firefighter boot in black water and firerepellant PBI fabric and microfiber, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on both sides in PBI. Sizes: 35-50.
Red First aid pouch with basic first aid equipment for on-the-go. Content: quick bandage 7x10cm, wound quick bandage, adhesive plaster, wound plaster, Cambric bandage, elastic hydrophilic dressing, gauze pads 5/5cm, dressing wadding, splinter tweezers, pocket scissors, disinfectant wipes, safety pins, Burnshield blots. Dimensions: 22 x 14 cm.
Screen carrier made of heat resistant plastic, type S57. Protects against arc flash. Suitable for attachment of face shields s59/s60 3/s605/s613/s615/s760.
The Com4-fit, with cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate bag. Colours: orange.
Hazardous electrical voltage. Hazard warning sign in self-adhesive polyester. 1 pictogram. Dimensions: 200mm.
Examination table: Steel profile window, chromed square legs on base. Height of table: 80 cm. Mattress 5 cm with faux leather trim, adjustable main section with automatic braking system. Dimensions: 180 x 60 cm. Includes paper roll holder. Paper rolls available separately (Art:1006256).
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 10,000 volts, operating voltage of 7,500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Anti-static absorbent wipes on 38 cm x 46 m sized roll, sheets perforated lengthwise every 23 cm. These medium-weight double-perforated pads on a roll are packaged in a box. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. Absorption capacity: 73 litres.
Earmuff for helmet X5 with double-cast (TPU/ABS) housing with details in bright colours for a increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 36dB.
Hygiene set for Peltor X2 earmuff.
Super-light (300 g) ventilated safety helmet made of strong ABS. With 6- pointtextile suspension (52-63 cm), a handy ratchet and highly absorbenthydro-flock sweatband. This version has extended neck protection withoutventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Available in: white, yellow, blue, red, green, orange.
Fall-stop device, 2,5 metre strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Only for vertical use. Weight: 1.64 kg. Max user weight: 140 kg.
