BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
High shoe S3 in waterresistant black full grain leather with uvex waterstop technology for protection against splashing water and 200J synthetic toe cap and steel antiperforation sole. Innovative uvex bionom x design creates a biomechanical symbiosis between the foot, the upper, the sole and the floor. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU (i-PUREnrj) with strong antislip values and very good shockabsorption. Free of phthalates and silicones. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-52.
UV-resistant polyethylene chain to block off danger zones. Can be used in combination with marker poles. Weight: 2.7 kg per 25 m. Le ngth: 25 m. Colour: red/white.
Oval carabiner made of steel. Manual closure of the locking mechanism. Opening: 18 mm. Resistance: 25 kN. Weight: 156g.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%. processes with chemical risks.
Safety helmet made out of ABS with wheel ratchet, short peak and 6-point cradle out of textile (52-63cm) with a strong absortbant Hydro-Flock sweatband. Has an integrated visor with anti-scratch and anti-fog coating. Colors: white, yellow, blue, red, green, orange, black.
Coverall, 50% polyamide, 50% polyurethane, 170 gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zipper under double storm flap with press stud fastening, elastic in the waist, windstopper in the sleeves, adjustable press stud fastening at the bottom of the leg. Complies with: EN 343.
Long sleeve t-shirt in 100% combed cotton (190g/m²), single jersey. 4-layer ribbed, circular knitted, neck tape. Available colors: navy, royal blue, black, white and gray. Available sizes: XS-7XL (except 4XL and 6XL).
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 60 cm to 63 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
Parka Gore Tex Diablo multinorm: - 2 front pockets; - 1 napoleon bag; - 1 breast pocket; - 1 inner pocket. Zip-in fleece : 1046734 Quality: PES / CARBON WITH GORE PYRAD TECNOLOGY Available sizes: XS-3XL. Available colors: Fluo yellow / navy, fluo yellow / gray and fluo orange / gray. Compliant with: EN 343 4:4, EN ISO 20471 class 2/3, EN ISO 11612, EN ISO 14116, EN 13034 type 6, EN 1149-5 and IEC 61482-2 class 2.
Cederroth First Aid Kit Medium is a First Aid Kit made from a durable rubber-like material with a matte finish to keep dust, moisture and dirt at bay. It keeps the equipment hygienically clean, so it is always ready to be used. The products are packed in transparent plastic pockets, so you can clearly see all the products, making it easy to find the product you need when every second counts. All products come with clear, self-explanatory instructions. The kit is bright green and yellow, making it easy to see from a distance. The practical handle with an adjustable Velcro strap makes it easy to attach the case or carry it with you. Suitable for 2 persons. Dimensions: 231 x 190 x 78 mm. Content: 1 Breathing Mask (REF 2596), 2 Pairs of Gloves (REF 2596), 6 Salvequick Wound Cleansers (REF 1880), 2 Safety Hand Cleansers (REF 2596), 1 Rescue Blanket with a heat-reflecting aluminium side (REF1892), 1 Scissors (REF 270002), 1 Cederroth 4-in-1 Bloodstopper (REF 1910), 1 Cederroth 4-in-1 Mini Bloodstopper (REF 1911), 1 Cederroth Burn Gel Dressing (REF 901900), 10 Salvequick Plasters (REF 1880), 4 Salvequick Maxi Covers (REF 658024), 1 Elastic Bandage 8 cm x 4 m (REF 1882), 1 Contents List, 1 First Aid Instructions.
Gray flame-retardant PU coating on 1 side, for strength and slip resistance. For light welding and grinding work. Vertical use. Free of asbestos. Short-term temperature resistance up to 600°C. Approved according to EN13501-1.
Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Short zip sweatshirt in metal and ribbed cuffs and hem. Two front pockets. Quality: 80% ecological Fairtrade cotton, 20% recycled polyester, 280 g/m². Available sizes: S-4XL.
T-shirt Multinorm 103004 with long sleeves and reflective bands. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colors: Navy. Available sizes: XS-5XL. Complies with: EN 1149-5:2008 and EN ISO 11612:2015.
Scratch resistant, tempered mineral glass for protection against welding spatter. Dimensions: 108x51mm.
Lanyard with large scaffold hook in elastic band, maximum user weight: 130kg.
Service pant in full stretch that provides maximum freedom of movement. Modern, tight fit. Sewn-in, adjustable, stretch in the waistband for comfort, also rubberized to keep the pant on place.
The Axion drench shower nozzle uses the latest hydrodynamic principles to spin inlet water and break it into smaller, discrete droplets. This spinning and atomization action mitigates strong physical pressure driving water to the outer rim, making distribution equal across entire footprint of the flow.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 5PPM and 10PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The upper is made of washable microfibre. The closure features an elastic strap under a waterproof flap. The breathable textile lining provides extra comfort. The composite safety toe cap offers protection up to 200 joules. The shoe is equipped with a PU2D sole.
Rechargeable, compact, and lightweight headlamp (magnetic and USB-C), 500 lumens and a 130-meter range, weighing only 79g including battery, with an extra red LED on the front, fully dust- and water-resistant (IP68). Includes: Li-ion battery, USB-C magnetic charging cable, connect adapter, helmet mount, and a 7-year warranty (after online registration).
Eye/face wash with innovative eye-rinse system directed away from the nose and towards the outside of the face. Manual valve, chrome-plated Eye/face wash spray head made of green ABS plastic. 2.4m hose made of green PVC. Incl. wall bracket with hanging loop made of black ABS plastic. Water connection adapter: 1/2" male thread.
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color orange makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.
Clear faceshield 5F-11 provides increased protection against high speed particles (120m/s).Compatible with the 3M™ V5 Face Shield System for mounting on a 3M™ G3000, G500 or G22 Series Safety Helmet. In accordance with: EN 166
Boot S3 in black, heat resistant full grain leather. Toe cap in steel and synthetic anti-perforation sole. Lining in leather with heatresistant garments. Outer sole in Nitril STEINAU. Removable insole in Basic Grey. Sizes: 39 - 50.
Thermal shirt with long sleeves in 100% polypropylene (130g/m²). Round neck, long sleeves, elongaited back, stitched seams, very breathable and moisture managing, thermally insulating, stain resistant, comfortable and ecologic. Available sizes: S-3XL. Available colours: anthracite grey. No PPE.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate grey lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision coating. Frame: black/white.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12, 14: 35-52.
Low shoe in microfiber, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-49.
Luxury ladies' fleece vests are designed to make you feel comfortable regardless of the cold weather and working conditions you can face. A very favorable and important feature of the material Microfleece is the high insulation value, which protects the fabric against unwanted cooling of the body. This Sweatvest Fleece Luxe for women has a contemporary fitted fit with a feminine look. This product is finished at the bottom and at the end of the sleeves with an elastic tape that ensures that the garment fits perfectly around the body. Also, at the bottom of the sleeves a thumb hole is made so you can let your sleeves fit around the palm of your hands. That gives an extra protection against wind and cold. Handy pockets on the outside as well as on the inside of the Sweatvest ensure that you can carry all your essentials with you, such as phone, cards and keys. Fabric: 100% polyester, Microfleece, 280 g / m². Available colors: Red, royal blue, navy, black and gray. Available sizes: XS-3XL.
This T-shirt from the Casual line has long sleeves and is washable at 60 degrees. The elastane provides a nice fit and a high wearing comfort. After washing you can easily dry the T-Shirt in the dryer. Available sizes: XS-5XL. Available colors: white, navy, red, royal blue, dark gray and black.
The Sweater Multinorm Bicolor has a contemporary look and is made from 60% fashion acrylic, 39% combed cotton and 1% carbon with a fabric weight of 280 g / m2. Available sizes: XS-5XL. Available colors: Fluo yellow / navy. Compliant with: EN ISO 11612, EN 1149-5: 2008, EN ISO 20471 Class 2.
Flame retardant and antistatic ladies pants in strong inherent flame retardant material with an increased visibility at the bottom of the legs. Concealed zip, 2 deep side pockets, 2 back pockets with flap, folding ruler pocket, separate leg pocket and knee pockets. Available sizes: 36-46 EU. Available color: navy. Compliant with: EN ISO 11612 A1A2B1C1E3F1, EN 1149-5, EN ISO 11611 Class 1, EN 13034-6, IEC 61482-2 Class 1 (ATPV: 15 cal / cm²) PPE category 3.
Low shoe in waterresistant nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted w ith a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-48.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Chemical resistant glove for precision and medium duty work. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 18gg nylon liner for high fingertip sensitivity in difficult conditions. Sizes: 7-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus.
Hooded sweatshirt with two-tone front zip and slightly curved side pockets. The inside of the hood is single jersey. The zipper pullers are in a contrasting color. Quality: 60% cotton, 40% polyester, 280 g/m². Available sizes: S-5XL. Available colours: White, navy, dark grey, light grey, green, red and black.
Squeeze handle to expose the ceramic blade with rounded tip in auto-retractable nylon handle. Non-sparking, non-conductive blade. Rust free blade, ambidextrous design. No tool blade change. No PPE.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.
Air regulator in Zytel (glass fibre reinforced polyamide) on belt for use in combination with 3M air hoods with bayonet coupling.Fitted with pressure reducer that eliminates any pressure fluctuations from the compressed air line, which provides improved comfort because the airflow remains constant. With regulator to adjust the air flow in the airhood. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 3.5 - 8 bar. NPF: 50 with M-100 and 200 with all other compliant hoods. Minimum airflow 170 l/min, max. 305 l/min.
Super lightweight sportive spectacles (37g) in clear polycarbonate. Protective covering thanks to flat base curve. Lens inclination of 11° ensures good view downwards and provides the wearer safeness from stumble-accidents. Flexible frame with soft temples(XCT). With Supravision Clean coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Soft and comfortable winter lined knitted glove suitable for versatile work in semi-wet and slightly oily environments. Nitrile fully dipped with sandy finish on palm and with touchscreen function. Withstands contact heat up to 250°C/482°F. More effective energy usage in combination with use of solar energy in the production has reduced the CO2 emission by 60g/2.1 oz/pair. More effective laundry process has reduced the water usage by 70% (6 liter/1.6 gal per pair).. Sizes 6-12. Complies with: EN388:2016 4.2.3.2.A, EN407: X.2.X.X.X.X, EN511: 0.2.X
JALCOPPER is a high safety shoe in the J-QUARTZ range from JALLATTE, with a shaft made of water-repellent grain leather, antistatic. a sole polyurethane J-Quartz equipped with the JAL'GRIP system (LG) and a safety nose made of composite Xetane B and perforation-resistant sole. EN ISO 20345:2022 A1:2024 From 35 to 48
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Complete D breast anchor point. Leg straps easily adjustable. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps have quick-release buckles. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Large stand-up D-ring on the back of the harness.
Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (1000276) (51-63 cm), highly absorbent hydro-flock sweatband (1000299) and standard 4-point chin strap (1034406). Specially designed to prevent injury if helmet becomes trapped during a fall: chin strap opens automatically. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm Connect slot for attachment of hearing and face protection.
Fall-stop device 1.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Only for vertical use.
Cellulose acetate shield, anti-fog coating, clear, length 225 mm. For use in combination with helmet holder S54B (1000790)/S54P (1023799) and adapter 3711 (1001188)/P3EV/2 (1001189) for mounting on Centurion safety helmets. Marking: EN 166 1 F 9 3 and EN 170 2-1.2.
Front seal as spare spart of hoods M-406, M-407. No PPE.
High shoe in velours leather, with a synthetic antiperforation sole and synthétic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 50.
Offers protection against electric arcs (class 2). Very lichtweight, flame retardant and antistatic rain jacket in 100% polyester with a highly breathable ePTFE membrane (Gore Pyrad™ technology)(215g/m²). Flameretardant lining in 50% aramid/50% viscose (115g/m²). Zip closure under flap with velcro, 2 front pockets with flap, chest pocket with flap, adjustable cuffs through velcro straps, elongated back, 2 loops for badge, vertical and horizontal reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Laces, black in polyester. Length: 75cm. No PPE.
Safety glasses with a black frame with orange accents. Soft nose bridge and temples. Polycarbonate lenses for UV protection with a anti-fog coating (HydroShield).
Signaling shirt with ARC protection that feels soft and comfortable. This shirt is inherently flame retardant <(>&<)> antistatic with good moisture management properties. Quality: 54% modacrylic + 44% cotton + 2% AST; ± 180 g / m². Available colors: Fluo yellow / navy. Available sizes: S-3XL
Dust mask, class P2 protects against solid and liquid particles of average toxicity. With exhalation valve for lighter breathing resistance and adjustable nose clip for optimized fit. Fitted with elastic headbands, ultrasound welded. NPF: 10.
High shoe in Putek® Plus textile, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Brushed fleece body warmer with long zip. Brushed on both sides. Two front pockets, contrasting zips and decorative stitching on the sleeves. Elastic tape on the bottom hem and cuffs. Quality: 100% polyester, 280 g / m² Available sizes: S - 5XL. Available colors: Black, Navy, Lime, Gray, Blue and Red.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
Hi-vis parka 3-in-1: • wind and waterproof jacket with removable inner jacket; • outer jacket with a 2-way zip; • reflective details; • vertical breast pockets; • badge holder; • large side pockets; • detachable and adjustable hood; • adjustable waist; • adjustable cuffs with velcro; • lightly padded inner jacket; • side pockets with zip and internal loop; • inside pocket with zip and telephone pocket. Quality: 100% Polyester. Available sizes: XS-4XL. Available colours: Fluo yellow/black, fluo orange/black and fluo yellow/navy. In accordance with: EN ISO 20471 class 3.
Earmuff for helmet, used with V-GARD helmets. SNR: 32dB.
Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.
