BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Standard fabric belt as spare spart for motor unit Versaflo. No PPE.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Normal peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Splash suit made of blue laminate. Suit with attachedc hemically resistant Kemblok gloves. The pant legs have integral socksandstraight legsthat can bepulled over boots. The zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Available in: blue. Sizes: S - XXL.
Ceramic rolling cutter for right- and lefthanded users. To avoid cutting yourself. Suitable for cutting hard plastic. Pas d'EPI.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 0: operating voltage 1000V, test voltage 5000V, special properties R (acids, oil, ozone) and C (low temperatures) .With 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-12.
Ladies t-shirt in 95% cotton/5% spandex, 190 gr/m² single jersey. Full- fashioned model with extra stretch for better wearing comfort. Smooth and thin V-neck. Available sizes: XS-XL. Available colours: Lime, Pink, Red, White, Turquoise, Purple, Navy, Black. Stockarticle in black, XS-L.
Suspension I/79GD-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ben and Bop. Not separately certified as PPE.
Flame retardant and antistatic nek protector in modacrylic/cotton/elasthane/antistatic fibre (300g/m²). Offers protection to the neck against molten metal splashes and flames. You can wear the neck protector in several different ways: around the neck, around the neck and head and to the bottom of the nose. Available size: 1 size. Available colour: navy.
Disinfectant spray for the skin. User instructions: Spray directly on the area to be treated, then dab using a compress. Repeat this process every 6 hours if necessary. Immediate effect. Composition: Aqua, chlorhexidine digluconate (Cas No. 18472-510) 0.2%.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted w ith a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-48.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Earplug Spark Plugs 7860. Packed in a refill bag per 500 pairs. Complies with: EN 352-2 (SNR 35 dB).
Long Sleeve Polo 502.42: neck tape Rib knit collar Button closure with 2 buttons side seams Washable up to 40°C Quality: 100% cotton.
Thin and comfortable shock-absorbing glove with cushioning Poron material in the palm and on the underside of the glove.
Protects against ammonia and organic ammonia vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%. Weight: 175gr.
Antistatic chemical-resistant gloves for protection against oil, paint, solvents and detergents in environments with a risk of electrostatic discharges.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Lanyard, 2 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Maximum user weight: 140kg
Retractable hose (525-850 mm) in PU for Adflo motor unit.
Synthetic glove, Nitrile foam/waterbased PU, Palm-dipped, Acrylic, Nylon, 10 gg, 15 gg, Spandex, Foam grip pattern, Fleece, Cat. II, Black, yellow, Withstands contact heat up to 100°C, for allround work . In line with : EN 388:2016, 4221A EN 407:2004, X1XXXX EN 511:2006, X2X
Sweater with full zip from the Progression collection, enhanced visibility EN17353.
Backpack to carry the motor unit Versaflo TR-300, TR-600 and TR-800 comfortly on the back. Easy to clean and adjust.
Escape mask (halfface) with ABEKP2 filter. Protects against organic and inorganic gases, solvents, sulphur dioxide, acidic gases, am monia, organic ammonia derivatives and toxic dust, mist and smoke particles. Easy to put on. Working time: at least 15 minutes. Pack aged in plastic box for belt or wall attachment. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosp here. Shelf life: four years.
Apron 90 cm wide, 120 cm long, with reinforced front patch, duotex: 100% polyester fabric with PVC coating, 300 gr/m²
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color orange makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.
Fall-prevention device, 10 metre galvanised steel cable, with external shock absorber. Housing made of plastic. Serves as connection between anchor point and harness. For vertical (max 140kg) and horizontal (fall factor 1, max 100kg) use, and suitable to use with sharp edges. Weight: 6.6kg. Dimensions block: 39cm x 17.2cm, width 8.7cm Can be maintained.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWÂ’s automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
Double lanyard length 1,5 meters. Elasticated line, on one side a standard snap hook and on the other side scaffolding hook Maxitube.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 55 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
High shoe in black fire-resistant full grain leather, fitted with a steel toecap and non-metallic anti-perforation midsole. Lining in leather heat resistant seams and a full, padded bellows tongue. Outsole in PU/Nitrile, SRC anti-slip resistant to fats and oils. Fitted with a PU scuff cap. Protection against molten iron and molten aluminium. Sizes: 38-50.
Sweatband, made out of Chamlon. Is PH-neutral. Suitable for Evo helmets with slip ratchet (Does not fit Evo8).
FFP2 premium flat-fold mask. Exhalation valve. Practical individual packaging. Adjustable head band. Color: white. maximum breathability even with really high dust levels. Cannot be reused. Comfort features: exhalation valve reduces breathing resistance and build-up of heat and moisture in the mask. Flexible and adjustable nose clip. Soft sealing lip guarantees a secure, comfortable sealed position of the mask. Soft material edges for high wearing comfort. D label. Certified FFP2 face mask to EN 149.
Low shoe in microfiber, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-49.
Soft shell jacket in light stretch material. Two-tone front zip and side pockets. Adaptable sleeves with velcro closure and drawstrings at the hem at the bottom. Zippullers in contrasting color. Quality: 96% polyester, 4% elastane, brushed inside. Available sizes: S - 5XL. Available colors: black, white, navy, dark gray, green, blue and red.
BasePro chainsaw jacket: The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work. The BasePro chainsaw jackets, which are the most economic pair of SIP Protection jackets of the range, still provide the comfort you want, the protection you need and the quality you expect from SIP Protection. Quality: Water repellent 65% Polyester - 35% cotton outer fabric, 210 g/m2. Available sizes: S-4XL. Available colours: Orange/grey.
Hi-Vis T-Shirt with long sleeves and Cooldry yarns. This offers protection from the sun by a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Complies with: EN 20-471 class 3.
Ergonomically designed knee pads providing durability, comfort and protection. This knee pad fits all Portwest garments and does not hinder the wearer in any way when walking. In accordance with: EN 14404: 2004 + A1: 2010 Type 2.
Browguard with slip ratchet in polycarbonate Arc Pro to use in combination with the visors 225mm and 170mm for arc flash risks posed by electrical faults. This system is fully tested to protect up to 40cal/cm2.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
Low shoe S3 in synthetic microvelour with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35- 52.
Full Zip Hi-Vis Sweater: • with contrast on the cuffs, shoulders and collar; • close-fitting fit; • sealed and segmented reflective tapes with stretch; • side zip pockets and spacious inner mesh pockets; • windstopper in softshell with thumb grip at the sleeve end. Fabric 1: 100% Polyester, Fabric 2: 90% Nylon, 10% Spandex. Colours: Fluo yellow/black, Fluo orange/black and fluo yellow/navy. Sizes: XS-4XL.
Safety helmet made out of PE. Has a 6-point polyethylene cradle (53-63cm). Available in: white, yellow, blue, red, orange.
Long black sock with grey foot. Excellent moisture control. Fitted with an extra heel, toe and shinbone protection, and extra ankle support. Antibacterial. ESD: electrostatic discharge. Made of: 34% wool, 29% polyamide, 23% polyester (Pro-Cool), 12% Amicor Pure acryl, 1% Bekinox, 1% Lycra elastane. Available in: eco black. applications, cold temperatures. No PPE.
Hood, TYVEK ®, polyethylene, non-woven, 41gr./m², antistatic, elastic around face and under chin. Available in: white. Sizes: 1 size.
Terylene suspension for Concept helmet with slip adjustment.
Face shield in clear polycarbonate, length 225 mm. Is compatible with S89 (1000806) and S89SR (1048119). For use in combination with helmet holder S54B/S54CE (1000790/1000789) and adapter 3711/S565 (100 1188/1001191) for mounting on Centurion safety helmets. Bracket S54, which you can see on the photo isn't included. Marking: 1 B 9 3.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 10.
Absorption granules that absorb virtually all aqueous and non-aqueous chemicals. Trivorex not only neutralises acids and bases but a lso oxidants, reductants, etc.
The Axion drench shower nozzle uses the latest hydrodynamic principles to spin inlet water and break it into smaller, discrete droplets. This spinning and atomization action mitigates strong physical pressure driving water to the outer rim, making distribution equal across entire footprint of the flow.
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands with closure. The new IonicAir filter technology reduces breathing resistance by 30%.
Leather glove, Unlined, 0,6-0,7 mm, Full grain goatskin, Nylon, Cat. II, Blue, white, Elasticated 180°, for fine assembly work . EN 388:2003, 2010
Trousers in a lightweight and durable material partly made of recycled polyester.
Foldable mask, class P3, New Generationfor toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Improved Cool Flow Comfort Exhalation valve provides even lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. This mask does not contain components of rubber latex and PVC. NPF: 50.
Sportive spectacles in clear polycarbonate. Frame is made out of recycled and bio-based materials. The uvex i-guard with its highly flexible frame ensures the best protection – and adapts individually to the widest variety of face shapes. The ergonomically shaped glasses reliably protect against liquids and particles..The clear polyamide lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,19kg CO².
Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (1000276) (51-63 cm), highly absorbent hydro-flock sweatband (1000299) and standard 4-point chin strap (1034406). Specially designed to prevent injury if helmet becomes trapped during a fall: chin strap opens automatically. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm Connect slot for attachment of hearing and face protection.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Supple, wear resistant, silicon-free gloves made of nitrile coated gel foam with lining of knit cotton and rubber inner layer to dampen vibrations. Reduces susceptibility to hand-arm vibration syndrome (HAVS) during industrial activities to an absolute minimum. With Velcro closure.
ABE2K1HgP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentration of 0.1%.
High shoe in black nubuck leather, with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Head lamp Peli, comes with two main bands, one of substance and one of rubber. Explosion-safe ATEX Zone 0, 3 LEDs and comes with 3 AAA (LR3) alkaline batteries.
Oval carabiner made of steel. Manual closure of the locking mechanism. Opening: 18 mm. Resistance: 25 kN. Weight: 156g.
Goggle with large field of vision, vented indirectly. UV-resistant acetate clear lens with antiscratch and antifog coating. Large adjustable headband with rotating anchor point, can be worn with most corrective glasses.
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. Rapid, large absorption capacity.Bag of 20kg.
Yellow first aid kit (bilingual) with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, well organised and more accurate! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape, temperature, dust and water resistant, maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in accordance with ARAB guidelines (Multi), Resc-Q-Assist Colour System, NL and FR colour guide, wall holder, content table in NL and FR. Version: Multi.
Long john (thermal) in 84% bamboo/11% spandex/5% polyester wicking. Very good thermal properties in medium or cold environment, regulates humidity, permanently anti bacterial, flatlock seams, stretch, perfect fit. Available sizes: XS-7XL. Available colours: black. No PPE.
Thermal shirt with long sleeves in 100% polypropylene (130g/m²). Round neck, long sleeves, elongaited back, stitched seams, very breathable and moisture managing, thermally insulating, stain resistant, comfortable and ecologic. Available sizes: S-3XL. Available colours: anthracite grey. No PPE.
Compact safety knife for routine cutting tasks. The metal-detectable plastic handle makes it easy to trace. It's concealed cutting edge easily copes with single-layerd card-board, film and packing tape and keeps your fingers safe. To order by 10 pieces. No PPE.
Crowd control helmet made of flame-resistant aramid fabric with special selfextinguishing lacquer with Nomex lining and 3-points chinstrap. Has a clear PC visor with anti-fog (inside) and anti-scratch (outside) and PU-Kevlar neck protection. Ideal in combination with HM50 mask. Weight: 1500g.
Screen carrier S55 Centurion for attachment to Contour face shields. This screen carrier includes Contour 30 mm adaptor for immediate attachment to Centurion helmet. Also suitable for addition of Centurion hearing protection (HELMET HEARING PROTECTION Scala SNR25 <(>&<)> HELMET HEARING PROTECTION Scala XI SNR30).
