HOOD M-207
Brand : 3M
Prod. No. 1042617
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
Here's how to choose your ideal maintenance partner: 5 points for consideration
24-08-2023
Choose the ideal maintenance partner for your PPE! Discover five key points to consider when looking for quality maintenance.
How to protect yourself when handling silicon?
01-09-2023
Find out about the hazards involved in handling silicon and the essential role of breathing protection to prevent silicosis.
Details
-
Brand3M
-
UNSPSC46182000
-
Catalogues
-
Hood compressed air
- Yes
-
Hood for motorunit
- Yes
-
Application
- Light applications
-
Material visor
- PC
-
Hood blower unit & air
- Yes
-
Properties hood
- With retractable visor
-
NPF
- 50
- 500
-
Suitable for
- Pharma
-
EN 12941
-
EN 14594
Product numbers
Documents
Respiratory protection
Gases, toxic fumes, oxygen deficiency, dust particles, and mists are not always immediately detectable, although they can be life-threatening. Therefore, it is very important to get advice from an expert when you suspect that there may be a risk to the respiratory tract.
This risk, together with the work to be carried out, will determine whether you can work with environment-dependent respiratory protection such as dust masks or half and full-face masks, motor units, etc.
When it is not possible to filter the air present, it is better to opt for environmental-independent breathing protection. These can be air caps or masks that are connected to the compressed air network. When you need to be sufficiently mobile, it is better to opt for a self-contained system such as a compressed air device or an escape mask.
It is also important to know in advance which substance to ‘filter out’ and how much of it.
If that is the case, calculate the Nominal Protection Factor (NPF) and use it to select the right mask with filter. Don’t know which it is in advance? Then you’ll need to opt for the ‘ABEK’ filters.
You will find all leading brands in our range: MSA, 3M, Moldex, Bartels, PureFlo, Honeywell, Genano, Scott, Avon, Spasciani, rsg safety, etc.
Did you find the right product? Then it’s important to check that it fits your face. We do this at Vandeputte by means of a Fit test.
Lastly, you can also contact us for the periodic maintenance of your respiratory protection: refilling compressed air bottles, cleaning and maintaining full-face masks, maintaining and repairing lung vents and breathing apparatus, etc.
.