BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Designed to keep the wearer visible, safe and dry in inclement weather. This lightweight stylish two-tone jacket has the following features: buildable hood, large pockets, vent on the yoke at the back and eyelets for extra ventilation. Available sizes: S-3XL. Available colors: hi-vis yellow / navy, hi-vis orange / navy. Conforms to: EN ISO 20471 Class 2, EN 343 3.3.
Low shoe in mesh, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in EVA/TPU/Rubber, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Signa T-shirt Bird Eye Knit, 100% polyester, rond collar, weight 150 g/m².
Trouser in quilted nylon, use as insulating intermediate layer againstthe cold, zip closure. Available in: black. Sizes: S - XXL. Suitablefor: transport and distribution sector, agriculture and food industry. PPE category 1.
Anti-static absorbent pads measuring 41 cm x 51 cm. These medium-weight perforated pads are packaged in a box. Packaged per 100 piec es. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of chemicals, acids and bases or universal absor ption. The green colour identifies these wipes as chemical waste. Absorption capacity: 88 litres.
Yellow sturdy, anti-static safety boot in PVC with steel toecap and antiperforation sole. Provided with forefoot reinforcement, metatarsal protection, ankle protection and anti-slip outsole. Very suitable for working with high pressure cleaners (up to 800 bar). Sizes: 39-48.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Reduced peak. W ith woven ventilation opening along the side. Size: 54-62cm.
Flame retardant, anti-static hi-vis rain jacket, SIOPOR® Excell: 3-layer fabric: Dobby Ripstop Polyester fabric (& AST) + breathable FR PU + inherent FR knitting; ± 270 g/m², High performance lightweigth fabric, 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Comfortable, Supple, High tear resistance, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch & close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch & close fastening, Back length 85 cm (L), Unlined, 2 inside pockets. 14116 index 3, EN ISO 11611 class 1 A1/A2, EN 1149-5, EN 13034, EN 471 3.2., EN 343 3.3
High shoe S3 in full grain leather with steel toecap and steel antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.
Glove with full nitrile coating on low-lint seamless knit polyester/nylon liner. Glove with high sensitivity and good grip thanks to the rough finish.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Comfortable half mask in TPE with integrated and replaceable particle filters . Sizes: S/M and M/L.
Havep Multi Shield multinorm work trousers model 80308
Multinorm T-shirt Diablo: - Long Sleeves; - V-collar in contrast; - Raglan sleeves; - 2 angled bevel ref tires. Quality: 63% FR VISCOSE -32% NOMEX - 5% ELASTANE. Available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 Class 2, EN ISO 11612 A1B1C1F1, EN ISO 14116 and EN 1149-5.
Leather boot, with 2 loops to help pull boot on. GORE-TEX lining. The Softane 2-component sole allows for better slip resistance and is resistant to oil and hydrocarbon contact. This shoe offers great shock absorption. With a protective toecap in synthetic polymer, which makes the shoe lighter and a stainless steel anti-perforation insole. Sizes: 37-48.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Chemical resistant glove, blue colour, thickness 0.45 mm, length 30 cm. Made of flocked natural rubber, 100% latex. Suitable for automotive assembly, light assembly, chemical industry, refineries, pharmaceutical industry, cleaning and maintenance. Sizes: 6,5/7-9,5-10.
Fall-stop device with 2 metre strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
High shoe in water resistant black full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textil. Outsole in Vibram Nitril, SRC antislip, oil and carburant resistant. Also resistant to contact heat up to 300°C. 100% metal free. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Thermal shirt with long sleeves in 84% bamboo/11% spandex/5% polyester. Very good thermal properties in cold or medium cold environments, regulates humidity, permanent anti bacterial, flatlock seams, highly stretchable, perfect fit. Available sizes: XS-7XL. Available colours: black.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X
Twin pack dust filter protects against highly toxic dust, mist and smoke particles. Can be used in combination with the Adflo motor unit. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Safety glasses with clear polycarbonate lens fitted with an anti-fog and scratch resistant coating. Soft material around the earbranches for reducing the pressure.
Practical plastic hearing protector with 3 wearing positions (over the head, behind the head, under the chin) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Low shoe in microfiber, with a synthetic 200J toecap (amagnetic). Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-52 (widths: 10, 11, 12).
Non-Metal and Inherent Flame Retardant lab coat. Back length in size L=102 cm, L-Tall +10cm. Concealed front closing with plastic stud fastener. Chest pocket with flap. Front pockets with flap. Adjustable elastic in the back. Adjustable cuffs with plastic stud fastener. Quality: 812: Tera TX TW, 260 g/m², IEC 61482-1-1, ELIM 9,1 cal/cm², EBT: 10 cal/cm², LOI: 29,8% Available sizes: XS - 4XL Specifically for Cargill with D025 sew-on breast pocket
Flame retardant and antistatic long johns in 60% modacryll/38% Lyocell /2% polyester. Cool and comfortable material, regulates body temperature, elastic waistband. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
The Twill Rewear work trousers are comfortable, lightweight and circular work trousers. The work trousers are made of 65% recycled polyester and 35% organic cotton and are available in four cool colours. Available sizes: 42-66. Available colors: navy, black, dark gray and ink
Work trousers from the HAVEP® Multiprotector+ Inherent FR collection. These pants meet 6 safety standards and are made of modacrylic with organic cotton. Conforms to: EN 1149, EN 13034-6, EN IEC 61482, EN ISO 11611, EN ISO 11612, ISO EN 20471 Available colours: fluo orange/grey Available sizes: 44-68
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Sporty goggles, derived from the successful Uvex ski goggles. Successor to the Ultravision 9301 PC. Very comfortable, good protective coverage thanks to the DCT technology. Glasses with limited ventilation. Frame colour: green/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside. 170 2-1.2.
Delineation tape in red/white with a length of 100M, with of 80mm.
Boot in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex® liner. Outsole in PU/Vibram®, SR antislip, oil and carburant resistant. Removable, po lyurethane insole with textile layer. 100% metal free. Sizes: 37-48.
AXP3 filter in plastic housing for 3M full face masks. Protects against organic gases and vapours with a boiling point <65 °C, plus toxic dust, vapour and smoke particles. Only for use in combination with full face mask, and filter is for one-time use only. Suitab le for: processes involving chemical risks.
Welding glasses with yellow synthetic frame, with elastic headband for a perfect fit. Fitted with a flip up part and lens with green welding shade.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Industrial headlamp Vizion I,with non-slip rubber helmet strap.Safety Yellow, ATEX. 3 beam modes: spot,diffuse and red diffuse.The red diffuse mode makes night vision possible. The Vizion is O-ring sealed for a completely watertight guarantee. Designed for gloves. Effortlessly access the power button and beam selectors with even the thickest gloves. Lamp module can be removed from its casing for use as a portable work light.
Low shoe Till Low ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 36-48.
Gloves in soft jersey lining with natural rubber coating. Comfortable, smooth latex for excellent grip on wet and smooth items. Also insulates against cold.
The 3M™ Solus™ 1000 Series Kit includes a pair of Green and Black Solus safety glasses featuring clear lenses with Scotchgard™ Anti-fog coating, an optional elastic strap, and a removable foam gasket. 3M™ Scotchgard™ Anti-Fog Technology brings higher anti-fog performance* to safety eyewear, helping workers see more clearly to complete on-the-job tasks. The elastic strap and removable foam gasket are optional accessories that may be attached or removed from the eyewear depending on the preferences of the person wearing the glasses. The strap fits comfortably around the backside of the head to help keep the glasses securely in place when being worn. The removable foam gasket is also included to help reduce eye exposure. Small vents in the foam gasket help reduce fogging. Other features include removable padded temples and a soft nose bridge for added comfort.
Modern jeans trousers in 100% denim cotton (395g/m²). Triple stitched seams, 1 ruler pocket, hammer loop, double rear pocket, 2 side pockets. Available sizes: waist; 29-44", length; 30-36". Available colours: dark blue (denim).
Innovative style with a panoramic polycarbonate lens with integrated side protectors for optimum coverage of the eyes. Includes Supravision Plus coating: High-tech coating, scratch resistant on both sides, permanent fog-free and anti-static. Wraparound side arms ensure perfect fit. Ventilation with labyrinth seal helps improve climate around the eyes. Secure and pressure-free fit. Flexible 2K side arms and inclination.
The ‘industry’ body warmer has a ‘fake fur’ lining . The body warmer offers extra visibility thanks to reflective piping on the front- and backside. De coating ensures rejection of dirt and water. The body warmer offer sufficient storage thanks to the chest pocket, two side pockets, two lockable flap pockets and a lockable horizontal side pocket. The bodywarmer is for 70% made of polyester and 30% of cotton. And has the 250g/M2 quality. The body warmer is available in navy and black in sizes XS-7XL.
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
Tunic, polyester / cotton, 195 gr./m², height 80 cm and short sleeves. Available sizes: 0-6. Available colors: navy, wine and zinc.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Terylene suspension with ratchet & Drytec sweatband, suitable for Centurion Concept, Spectrum, Vision Plus and Nexus Core.
Dust-proof, impact resistant first aid kit made of ABS plastic,
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
White female clog SB in perforated microfiber, with a 220J steel toecap Adjustable buckle. Liner in Cambrelle and sole in PU/PU. Sizes: 35-42.
High shoe in microfiber/cordura, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Made partly from recycled content; in lining, laces, insole and protected midsole Sizes: D, 36-48 / XD, 39-48.
Coverall, polypropylene, 50 gr./m², hood with elastic, zip closure under flap, elastic at wrists and ankles. Available in: white, blue. Sizes: L- XXL.
Dust- and liquid-proof plastic wall cabinet for storage of two Barikos bottles.
Replacement knifes, straight with large rust-proof cutting surface. Thickness: 0,63 mm, Lenght: 60mm, width: 19mm. Pack of 10 pieces. No PPE.
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. With breat hable, abrasion resistant lining in BIOACTIVE textile. Sole in PU/Vibram, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Scuffcap resistant against abrasion. Sizes: 37-47.
Red safety cutter with simple hook. Unique cardboard piercing shape prevents damage to carton contents.Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments Small ridges ensure a secure grip. Simple blades: 1021645 - dimensions knife: 1cm.
High shoe S3 in black / brown full grain leather with a 200J plastic toecap and plastic anti-perforation sole. Lining in synthetic breathable 3D material. Comfortable insole in coolmax. Sole in PU / TPU. Sizes: 37-47.
Superlight welding overspectacles with panoramic side protection and a perfect, pressure-free fit. Temple length is size adjustable. Frame in black/green synthetic material. Fitted with a grey polycarbonate lens: welding lenses are protection from harmfull UV and IR radiation. With Infradur coating: High-tech coating, scratch resistant on both sides, fog-free on the inside and minimise damage from welding sparks.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Lightweight air hood with inegrated bumpcap. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50, with Jupiter and compressed air, NPF: 500 with TR-300, TR-600 and TR-800.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
Comfortable and lightweight slim-fit work trousers for women: - Raised back - Ideal for logistics work - Various storage options - Adjustable in waist Quality: 65% polyester / 35% cotton, 245 g / m². Available sizes: 32-46 NL. Available colors: navy, royal blue, dark gray, black and red.
High safety shoe in microfiber/textile with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
