BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
High shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
This cream protects the skin against all oil-based, non-water-soluble substances and organic solvents (oil, grease, paint, graphite, metal dust, soot, etc.). Easier to wash hands, while the dry hands still retain a good grip. Protection against non-water-soluble s ubstances. Content: 100 ml tube.
Low-cut safety shoe S2 made of nubuck leather, with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: D (35-48), XD (37-48).
Composite toecap to protect the toes. Per 5 in different sizes ( 1x S : 35-39, 2 X M: 40-44, 2 x XXL: 45-48).
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Knee pads for Dapro work trousers. Dimensions: Length of 24 cm and a width of 16.8 cm.
Low shoe Till Low ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 36-48.
High shoe in black waterproof nubuck leather, with a steel anti-perforation sole and a steel 200J toecap. With a breathable, abrasion resistant Gore-tex membrane. Sole in Vibram PU / Nitrile, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 6.5-12 (UK) / 40-47.
High shoe in velours leather, with a synthetic antiperforation sole and synthétic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 50.
Leather welding apron. With adjustable braces for a better fit, 1 large chest pocket and 1 front pocket with velcro. Kevlar® stitched seams. Available size: 1 size (91x58cm).
Green safety boot from the Acifort range (Acid+Confort) in PVC/Nitrile rubber for a good chemical resistance, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC/Nitrile rubber with tread resistant against dirt. Wear resistant and confortable through the optimum grip. Sizes: 39-48, 49/50.
Flame retardant and antistatic fleece Diablo: - 2 front pockets; - 1 breast pocket; - zip-in in parka art 1046719. Quality: MODACRYL / CO / PES / NEGASTAT 48% / 32% / 18% / 2%. Available sizes: XS-3XL. Available colors: Gray / black. Compliant with: EN ISO 11612 and 1149-5.
Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Hip pockets provide just that little bit more storage space for all the tools you carry with you while working. These Swing pockets are made entirely of Cordura and offer various storage options.
Low-cut workshoe in microfiber without toecap. Lining in textile. Walking sole in PU/TPU. Sizes: 36-49.
Cut resistant glove made of HPPE and a black, abrasion resistant nitrile foam coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A light weight glove, high dexterity, touchscreen compatibility and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.3.4.2.C, EN407:2020:X.1.X.X.X.
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with wheel ratchet. Has a Chamlon sweatband.
Adapter Peltor P3EV/2 for helmets with standard 30 mm slot (except G2000). This adapter can also be used for attachment of visors.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Black sock with grey foot. Excellent moisture control to work in warm conditions. Fitted with an extra heel, toe and shinbone protection, and extra leg and ankle support. Antibacterial. ESD: electrostatic discharge. Made of: 35% cotton, 24% polyamide, 20% polyester (Pro-Cool EcoMade), 14% acryl, 1% Bekinox, 1% Lycra elastane. Available in: anthracite, black. No PPE.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
High shoe in microfiber, with a synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in TPU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-47.
Flame retardant hivis rain trousers in PU quality.
Safety glasses with a black frame with orange accents. Soft nose bridge and temples. Polycarbonate lenses for UV protection with a anti-fog coating (HydroShield).
Havep Multi Shield multinorm work trousers model 80308
Functional trousers with stretch panels on strategic places. Ventlilation openings along both leg sides. Detachable holster pockets. Leg hems reinforced with Cordura® for increased durability. Pre-bent knees. Reflective details. Leg pockets for folding rule and tools. Internal pockets for knee protectors, adjustable in two height levels. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C44-C62 (extendable to C146-156), D84-D120.
Low shoe in waterresistant black nubuck leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/VIBRAM, SRC antislip. Whole insole. Sizes: 39-47.
High shoe in smooth leather, with a steel antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex membrane. Sole in P U/Nitrile, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Dust- and liquid-proof plastic wall cabinet for storage of two Barikos bottles.
Pair of conically shaped earplugs, made of skin friendly memory foam, for protection against general noise. Fitted with neck cord an d sold in sets of 100 individually bagged pairs. Sizes: S and L. In line with EN 352-2 (SNR 33).
Lightweight (34g) and esthetic safety spectacles, with integrated side protection. Antistatic, with flexible side pieces.
Coverall, 2-piece hood, external yellow stitched in seams, elasticated waist, cuffs, ankles and hood, nylon zipper. Category III, Type 5/6
Spare blades (one sided!) for safety cutter Klever X-change (1018439)
Flame retardant, anti-static hi-vis rain jacket, 100% polyester fabric with 100% FR PU coating + AST; ± 250 g/m², 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Very comfortable, Supple, High tear resistance, Taped seams, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 2 patched pockets, 2 Loops for badges, Round inset sleeves, Sleeve narrowing by press studs, Back length 85 cm (L), Fixed flame retardant cotton lining, 2 Inside pockets, Zipper in back lining for placing logos.
Sturdy gloves in 100% nitrile with rolled edging. Fully powder free. Antistatic and silicone free. Food approved. Length 40 cm, thickness 0.12 mm. Sizes: 5.5 - 6 / 6.5 - 7 / 7.5 - 8 / 8.5 - 9 / 9.5 - 10 / 10.5 - 11.
Sweatshirt with 1/2 zip and contrast colours under arms. Qualiy: 65 % Cotton and 35 % Polyester, 280g/m2. Available Colour: White, navy, grey, black, forest green, red, sky blue and black/yellow. Available Size: XS-4XL.
Kneepads in EVA Foam. Quality: 100% EVA, Ethylen Vinyl Acetat. Dimensions: 16 x 21CM.
The HL400 Lite is a dispenser, completely transparent so you see at a glance when it needs to be refilled. All parts are 100% recyclable. Dispenses earplugs very quickly. Dispenser with 1 refills (303).
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a Gore-Tex liner. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
Inherently flame retardant metal-free switch jacket with Velcro closure at the front for quick doffing. PPE category 4 (>40 cal/cm²). The jacket has fluorescent shoulder pads for extra visibility and is made of supple, wind and water resistant softshell material. Velcro closure at the front. Adjustable cuffs. Quality: Windtech FR 550, 550 g/m², wind and water resistant. Available sizes: S-L-2XL-4XL. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612: A1+A2 B2 C2 F2, IEC 61482-2: CL.2, EN 1149-5 and EN 13034: type PB[6].
High shoe in leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-49.
Bag for half and full-face Moldex mask. Dimensions: L x W x H 25x11x30.
Thermal insulating glove with PVC dots on palm. Glove made of Thermalite fibres.
Waistpants with many of functional pockets. Red-35, sky blue-53 and forest green-66 have got contrasts in black. C42-C64, by unpicking the red stitching at the hem the trousers can be lengthened by 5 cm. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C32-C50.
Flame retardant chinos with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Sizes available: 44-64, 146-156, 96-120 EU. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
Full-face mask Basic Plus is the economical version of full-face mask 3S. Mask made of very comfortable, high-quality rubber. Antifo g visor made of acetate, provides wide field of vision (80 %). Speech is conveyed via exhalation valve located just above the filter connection. The headband is easily adjustable, no carry strap for hanging the mask around the neck. Fitted with standard EN 148 thr eaded connection for filters or air hoses with matching coupling.
Welding glasses with yellow synthetic frame, with elastic headband for a perfect fit. Fitted with a flip up part and lens with green welding shade.
Designed for SAFE collection of used blades and once completely filled final disposal. Always remember: Carelessly discarded blades represent an imminent risk of injury to one and all! Once FULL, screw the lid to the point where the red lock pin engages = the container is now SAFE for disposal. Loose packed item. Sized: 100 x 100 x 210 mm. No PPE.
Goat leather welding glove, unlined. Good finger sensitivity. Split leather cuff with Kevlar seams. Length 31 cm. Sizes: 7-11.
Fall-stop device with 2 metre strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Refill pack Com4-fit for Uvex dispenser. Available in plastic bag containing 600 earplugs (300 pairs). light orange.
Screen carrier S55 Centurion for attachment to Contour face shields. This screen carrier includes Contour 30 mm adaptor for immediate attachment to Centurion helmet. Also suitable for addition of Centurion hearing protection (HELMET HEARING PROTECTION Scala SNR25 <(>&<)> HELMET HEARING PROTECTION Scala XI SNR30).
High shoe Run in water repellent split suede with Geox side transpiration system (Net Breathing System). Equipped with an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable nylon and breathable insole. Sole in PU/PU. Sizes: 35-48.
Flame retardant and antistatic rain trousers Witham with elastic waist and ankle narrowing by means of press studs. Quality: 100% FR Polyester knit with FR PU coating + AST; ± 240 g / m². Available sizes: S-3XL. Available colors: Marine. Compliant with: EN ISO 14116: 2008 / Index 1 / 5H / 40, EN 343: 2003 + A1: 2007 Class 3-1 and EN 1149-5: 2008.
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a mesh and textile liner and Gore-Tex membrane. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
Black powder-free disposable glove made of soft nitrile with extended cuff for extra protection of the wrist and forearm. Fully embossed for a reliable and consistent grip. Silicone and latex free and antistatic. The black color makes it easy to see if the hands have come into contact with potentially dangerous powders. The glove has been tested for phentalyl and stomach acid (vomit), simulating a dangerous overdose from practice. Suitable for use in the food industry. Length: 300mm, palm thickness: 0.14mm, finger thickness: 0.17mm. Sizes: (S) 6.5/7 - (XXL) 10.5/11. Complies with: EN ISO 374-1:2016 Type B: JKPT, EN ISO 374-5:2016 Virus, EN421
Cut resistant arm guard, with unique design so that the sleeve stays in place at hand level and does not curl up. With extra elastic at the wrist. In 13 gauge HXFIBR fiber mixed with polyester and ealstan for a good fit. Suitable for use with food. ESD approved according to EN16350. Available in sizes M-XL.
Low shoe in waterrepellant suede microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Black boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
All-round white glove for catering operations. Mechanically strong, heat resistant and impervious for ovens, dishwashers, autoclaves, cooking activities. Nitrile glove of 45 cm with a cut resistant insert and brushed finish on the fingers. Sizes: 7 (outer size:9), 9 (outerr size: 11) and 10 (outer size 12).
Goggle in flexible and comfortable PVC, with a clear panoramic 1,5mm and anti-abrasion polycarbonate lens. Foreseen of a universal nose bridge and a 12 mm wide elastic strap. It has 4 ventilation valves that provide indirect ventilation to help prevent fogging. Can be used over prescription spectacles.
With these new work trousers you can literally do anything! Fully 4-way stretch and extremely lightweight. The 4-way stretch work trousers have a contoured fit, which makes them extra comfortable. The hard-wearing Cordura® fabric reinforces the trousers on the thigh pockets and at the ends of the trouser legs. MATERIAL 4-Way Stretch 260 g/m² 90% polyamide / 10% elastane Available sizes: 42 - 66 Available colours: black
Standard inner lens for welding helmet 9100. Not separately approved as PPE.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 27 cm.
Safety spectacles with wide field of vision and gray polycarbonate lenses, treated with an anti-fog coating. With soft temples and s oft nose bridge with a non-slip effect.
