BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Superb protection against cuts and abrasion, successor of Hyflex 11-630
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a mesh and textile liner and Gore-Tex membrane. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Mobile shower with neutralising solution (DIPHOTERINE®), for flushing chemical spatters from the entire body. The atomised water stream ensures perfect distribution. Content: 5 litres. Two year shelf life. Handy packaging which also makes it easy to transport the shower.
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XCT). The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Every day in many industries, people are sustaining hand and finger injuries that are preventable. Using the correct safety devise should be an essential part of everyday life. If you are working in areas where objects could hit you on the head, you would wear a hard hat. If your eyes are at risk from foreign objects or wind blown particles, you would wear safety glasses. Think about your hands in the same way! Be sure to keep them safe and out of harms way, be sure to use the Fingersaver, don’t take risks with you hands.
White classic clog in microfibre with steel toe cap. Lining and heelpatch in microfibre. Sole in PU with good antislip. Adjustable step- in surface with inherited fastening buckle. Washable. Very suitable for HACCP. Sizes: 36 - 46.
The new HAZMAX S5 FPA HRO boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 36 - 48.
Jacket, 100% polyester, PVC layer, 230 gr / m², fleece lining, concealed hood, fleece lined upper body, print opening, spacious fit, secure pockets, adjustable cuffs through Velcro. In accordance with EN 343 3.1.
Firefighting trousers in NOMEX® STRIKE (220g/m²), SOFIGUARD treated with PU FR membrane (145g/m²), internal aramid (ARALINEX) lining (250g/m²). Press-stud closure under velcro, external reinforcements on knees, executed in 2 parts for easy bending, removable suspenders, 2 patched leg pockets with extra knee pads in neopreen. bottom finished for protection against water rising, leg hem provided with KEVLAR® re inforcements, leg cuffs. Available sizes: 164/82 untill 194/124. Available colours: navy.
Low shoe in black full grain leather with steel toecap and anti-perforation sole. Sole in PU/Nitril (VIBRAM), and insole in leather, with antibacterial treatment. This shoe is the extra wide XXD version of the Alaska. Sizes: 39-47. All materials are re-usable and shoe is fully dismantable.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.
P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-63 cm) and highly absorbent hydro-flock sw eatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Colours: white, yellow, blue, red, green, orange.
AlphaTec® Butyl (former Chemtek) gloves offer superior protection against aldehydes, ketones and esters as well as cencentrated mineral acids. The gloves are surprisingly flexible and provide excellent dexterity, they offer easy donning and good grip. The absence of latex proteins means there is no risk of latex allergies.
The reusable Whisper+ earplugs from Uvex, with a cord in the box, provide unrivalled wearing comfort due to the soft ribs and preformed design. Can be washed daily with normal soap under running water, which makes them economical. Available in: lime.
ABEK1P3 plastic filter housing with EasyLock connection for series 7000 and 9000 of Moldex. Protects against organic and inorganic gases and vapors with boiling point> >65 °C, sulfur dioxide, acid gases and vapors, ammonia and organic ammonia derivatives and toxic dust, mist and smoke particles. Filter Class 1: up to max concentration of 0.1%. +A1:2008.
Parka in polyester with PU coating FR. Water-and windproof, breathable, reduced chemically resistant, flame retardant and anti-static. Can be combined with a vest or a FR fleece. (Art 1024367). Hood also available. Characteristics: Straight collar, zipper covered under flap, two chest pockets, inside pocket, two patch pockets and 2 loops badges. Available in navy.
Flame retardant, anti-static hi-vis rain jacket, 100% polyester fabric with 100% FR PU coating + AST; ± 250 g/m², 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Very comfortable, Supple, High tear resistance, Taped seams, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch & close fastening, 2 patched pockets, 2 Loops for badges, Round inset sleeves, Sleeve narrowing by press studs, Back length 85 cm (L), Fixed flame retardant cotton lining, 2 Inside pockets, Zipper in back lining for placing logos. 13034, EN 343 3.3., EN 471 3.2.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.
Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F
Apron made of polyester / cotton with 3 pockets. The Gladys apron has a standard length of 80 cm. Available sizes: S-XXL. Available colors: Black, royal blue and gray.
Hi-vis ladies' polo for ambulance workers with contrasting collar, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes. Quality: 60/40 cotton / polyester piqué tricot 180 gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: XS-3XL. Conforms to: EN ISO 20471 Class 2.
Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Long sweatband made of genuine leather. Available in: brown. Suitable for: warm work conditions. Not separately certified as PPE.
Sporty lightweight goggles with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety, standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With synthetic removable headband. Includes Supravision extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Ergonomically shaped knee protectors made of rubber with a foam rubber cushion. The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
The Secure Fit safety spectacle is comprised of a rimless lens and fixed-length temple arm. An integrated side-shield is included for added protection. Temples also feature 3M Pressure Diffusion Temple Technology which helps diffuse pressure over the ear to enhance frame comfort across a diverse workforce. This innovative design promotes improved comfort and security of fit.
Modern spectacle. Fitted with temple ends with non-slip components, headband and an extra comfortable frame which creates a close seal to protect from particle ingress and splashes. Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Extreme coating. Frame: black/grey.
Composite toecap to protect the toes. Per 5 in different sizes ( 1x S : 35-39, 2 X M: 40-44, 2 x XXL: 45-48).
Hood, knitted Nomex®, flame retardant, with long collar, covered face with two eye openings. Available in: beige. Sizes: 1 size.
Safety ashtray Elite Smokers Cease Fire - Cool black Dimensions: 965mm x 305mm
Brown, metallic safety glasses with polycarbonate lenses which protect against dust and impact. Adaptable nose support in silicone with antislip properties benefit wearing comfort. Lateral protection in clear polycarbonate and riveted. Suitable for light or medium mechanical work and laboratory applications.
Overshoe in PolyPropylene in white. Seamless at the bottom of the overshoe to prevent wear and tear. Dimensions: 42x15cm, fabric weight: 38g/m², thickness: 50 microns. No PPE. Package per 100 pieces.
Maximum working tension: 17000V AC - 25500V DC. CEI 61111: 2009. Material: elastomere. Colour: grey. Packaging: 1m2. 3 mm thikness. Upper side ribbled, flat underside.
Pre-filter for TR-600. Ensures longer life of main filter.
Flame retardant and antistatic hi-vis softshell jacket in 100% polyester with FR PU membrane and inherent FR fleece (400g/m²). Zip closure under flap with velcro, straight collar, 2 inset side pockets, 1 chest pocket with zipper, 1 inside pocket, cuffs adjustable by velcro, 1 loop for ID badge, detachable sleeves, length back: 75cm, stitched seams. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Constructed using premium HiVisTex Pro tape, this Cotton Comfort t-shirt offers excellent freedom of movement due to its segmented tape design. Lightweight, stylish and breathable. Quality: 55% cotton / 45% polyester. Available sizes: XS-4XL. Available colours: Fluo yellow/black, fluo yellow/navy, fluo orange/black and fluo orange/navy.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Low shoe in leather/textile, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-47.
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with wheel ratchet. Has a Chamlon sweatband.
Dust mask, class P3, for toxic dust. Mask with nose bridge and seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the ma sk. Mask has rigid cup form for better retention of the shape of the mask during use. Fitted with non-adjustable, elastic headbands. NPF: 50.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point > 65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentrati on of 0.1%.
Black 61 cm long latex glove in an extra thick version of 2.6 mm. Provides a rolled edge to protect against leaks in damp conditions. Suitable for maintenance services, public sector, sewerage work and industrial cleaning. Sizes: 7,5-10,5.
Red safety cutter with simple hook. Unique cardboard piercing shape prevents damage to carton contents.Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments Small ridges ensure a secure grip. Simple blades: 1021645 - dimensions knife: 1cm.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Leather welding apron. With adjustable braces for a better fit, 1 large chest pocket and 1 front pocket with velcro. Kevlar® stitched seams. Available size: 1 size (91x58cm).
Performed in the latest innovative design. This timeless two-color hi-vis jacket is stylish and practical. The chest pockets are suitable for the modern mobile phone dimensions and the spacious pockets on the bottom are equipped with a zipper to safely store stuff. Other features are the reflective piping, HiVisTex Pro reflective striping, the Velcro adjustable cuffs and the reinforced double stitched seams. Quality: 65% polyester / 35% cotton. Available colors: Fluo yellow / navy, fluo orange / navy, fluo yellow / black and fluo orange / black. Available sizes: S-3XL. Complies with: EN ISO 20471 Class 3.
Duolens glasses with modern fashion-look and extra eyebrow protection. Size is between the Pheos and the Pheos S. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Polycarbonate CBR65 lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. Frame: white/black.
Earmuff for helmet, used with V-GARD helmets. SNR: 28dB.
Polyamide safety helmet with integrated flip-up face shield (310 x 170 mm / 1.7 mm thick) made of polycarbonate, specially approved for short-circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (53-63 mm) w ith ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected parti cles, from grinders for example.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
This quick penetrating body lotion offers the perfect nourishment for skin after dehydrating tasks and/or washing and showering. Particularly recommended for drier skin types, due to the combination of grape seed, allantoin and vitamin E which compensates for the skin's loss of moisture and oils. Previous name: Stokolan Intensive Repair
Gloves with blue nitrile layer on a jersey lining. Palm coating and safety cuff. Excellent abrasion and cut resistance, very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working industries. Application: heavy working conditions. Sizes: 8-10.
Very comfortable Fall arrest harness with 2 mounting points on back and chest. Breast Fixation Point by D-ring. Leg and shoulder straps with quick release, very easily adjustable. Harness very easy to put on. Universal size. Weight: 1,28kg. Suitable for general industrial applications.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Eco Midi cleaning paper according to the european ecolabel. 100% pure. Dimensions: length: 300m, width: 20cm. 1-layer. Package: 6 roles in one box.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Crosstech (resistant against bacteria and chemicals). Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Sizes: 38-48.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Lightweight air hood with inegrated bumpcap. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50, with Jupiter and compressed air, NPF: 500 with TR-300, TR-600 and TR-800.
Functional trousers with stretch panels on strategic places. Ventlilation openings along both leg sides. Detachable holster pockets. Leg hems reinforced with Cordura® for increased durability. Pre-bent knees. Reflective details. Leg pockets for folding rule and tools. Internal pockets for knee protectors, adjustable in two height levels. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C44-C62 (extendable to C146-156), D84-D120.
The HL400 Lite is a dispenser, completely transparent so you see at a glance when it needs to be refilled. All parts are 100% recyclable. Dispenses earplugs very quickly. Dispenser with 1 refills (303).
Low shoe in waterresistant black nubuck leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/VIBRAM, SRC antislip. Whole insole. Sizes: 39-47.
The Torvik is a premium hi-vis rain jacket which protects you against foul weather and the risks of an electric flashover. This supple jacket meets the high standards we set to our products regarding design, innovation and protection. The segmented reflective stripes not only add a modern touch, but also add to the breathability and comfortability of the jacket. The elongated backtail, preshaped sleeve ends and the use of an improved YKK-zipper with handy grip for easily opening and closing the jacket are some features which make this jacket stand out. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Apron Prochem® with long sleeves and taped seams.
Intervention helmet with special self-extinguishing paint, with Nomex interior and 3-point chinstrap. Adjustable thanks to the rotary knob, 5 different sizes are available. With Pinlock anti-fog double visor.
