BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
High shoe in nubuck leather/Cordura, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Seamless knitted cut resistant glove in polyethene and basalt fibres. Coated completely with nitrile that makes the glove water repellent. With nitrile foam coating on the palm for optimal grip in oily and durty conditions.Sizes 7 - 11.
Ultra-lightweight design (20% lighter than standard CUT D), without the addition of aggressive materials. 3x greater cut resistance (compared to other gloves made from the same material) using INTERCEPT cut resistance technology. 20% greater abrasion resistance thanks to FORTIX technology. Touchscreen, antistatic, EN16350, FOOD APPROVED. Sizes: 5-12 Complies with: EN388: 4X43D, EN407: X1XXXX
Sweatband for suspension of Iris helmet. Not separately certified as PPE.
Medium oily, silicone-free care cream for use after work. Stokolan sensitive penetrates rapidly and is suitable for any type of skin. Free from perfume, preservatives and colourants Dermatologically certified and skin-friendly With 9.5% natural moisturising factor (NMF). With ECARE quality label for allergy-friendly products with creatine and other oily, moisturising components. In line with HACCP and suitable for use in the food industry Easy to rub in Description: Soft Cream (O/W-emulsion). Free from perfume, preservatives and colourants, silicone and parabens. Suitable for hands and face. Content: tube of 100ml.
Supple and chemically resistant gloves made of neoprene on a cotton liner. The exclusive outer finish provides an excellent grip. Sizes: 7 / 8 / 9 / 10 , length 35.5 cm.
Bodywarmer, 65% polyester, 35% cotton, 190gr/m², multifunctional pockets
Earmuff for helmet X2 with double-cast (TPU/ABS) housing with details in bright colours for a increased visibility. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 30dB.
Working trousers in 60% cotton, 40% polyester (310 gr/m² twill). 2 thigh pockets under flap, 1 with mobile phone-pocket. Back pockets with flap and velcro closure. Double hem for +- 6cm extra length. Available sizes: 42-62 (NL); 36-56 (BE-FR). Available colours: Black, Navy, Khaki. Stockarticle in black, 42-52.
Softshell in 94% polyester/6% spandex with breathable PU membrane. STretch fabric for better wearing comfort, windproof and water repellent, laminated zippers, reflective piping, 4 front pockets, interiour pocket for phone or mp3, ID-badge, adjustable waist by pulling cord. Adjustable cuffs with velcro, beard cap. Available sizes: XS-7XL. Available colours: black, navy, dark grey. No PPE.
Jeans with hidden zipper, 2 wide side pockets, 2 large back pockets, 1 with flap, loose ruler pocket with mobile phone pocket, large hanging hip pocket with flap and extra tool pockets, easily accessible Cordura® knee pockets with opening at the top closed with flap and Velcro, triple stitched seams in vulnerable places for extra long life, pre-formed trouser legs for very good fit, wide belt loops, adjustable hammer loop. push button, highly breathable stretch fabric (polyamide / Lycra) in the back of the knee for optimal wearing comfort, 1 D-ring for badge holder and reflective piping. Quality: 66% / 30% / 3% / 1% recycled cotton / cotton / polyester / Lycra, 407 gr / m2. Available sizes: 33-38. Available colors: Navy.
Short jacket with hidden zipper and concealed press studs, 2 front pockets with flap, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra arm support to promote freedom of movement, cuffs with Velcro, extended back and reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: 44-66. Available colors: Black / gray, gray / blue, corn blue / navy and gray / red.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. With metatarsal protection XRD MET GUARD. Fitted with a breathable liner in textile. BOA-closing system. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Universal face shield with anti-fog feature (1,15 mm) in acetate (chemical resistant). With a chincup for extra chin protection. Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso. general industrial applications.
Prairie sole inserts are made of leather with a felt layer. They are breathable, mildew resistant and do not conduct heat or cold. S izes: 36-47.
Gloves knit from Zirnium® yarn, palm and fingers covered with cowsplit leather, 1.1 mm thick, 25 cm length, seams stitched with Kevlar® fibres.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 45/46.
Bermuda, 65% polyester, 35% cotton, 300g/m², multi pocket, zip closure. Available sizes: 42-64. Available colours: Navy, White, Black, khaki, dark grey. No PPE.
Labjacket with velcro closure without pockets, 30g/m². Available sizes: L-XXL. Available colour: white
Comfortable and lightweight slim-fit work trousers: - Increased back - Ideal for logistical work - Various storage options - Adjustable in taillle Quality: 65% polyester / 35% cotton, 245g / m². Available sizes: 42-66. Available colors: navy, royal blue and red.
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a Gore-Tex liner. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
High shoe in leather/textile, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-47.
J-Energy series. Low shoe in Putek PLUS textile with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D-mesh. Outsole in PU/E-TPU/PU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
High shoe in black microfiber/textile. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/rubber. Sizes: 35-51
Knitted cotton (interlock), with knitted wrist, men?s and women?s size. NO PPE
Blue, unlined nitrile gloves with Aquadri composite to keep hands free of perspiration. Very good physical characteristics, great ta ctility, silicon-free. Good chemical resistance to greases, oils, hydrocarbons, water-thinned solutions and various acids.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.
A1BE2K1/CO/NO/HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, toxic dust, vap our and smoke particles, nitrous gases and (to a limited extent) carbon monoxide. Only for use with full face masks with standard th reads. BE filter of class 2: for max. concentration of 0.5 %. AK filter of class 1: for max. concentration of 0.1%.
PVC/nitrile gloves with cotton lining for very good sweat absorption. These Fortex Pro gloves provide excellent resistance to chemicals, high tactility and a very good grip thanks to the roughened palm. Length: 35 cm.
The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.
Safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. Created for the thickest carton boxes! The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Dimensions: 154 x 22 x 67 mm Weight: 151g Depth: 21mm Blades: 1021313
Trousers in easycare material of polyester / cotton that ensures good shape and color retention: • spacious front pockets; • two back pockets with flap; • leg pocket with flap and ruler pocket; • the sizes C42-C64 can be extended by 5 cm. Available sizes: C42-C64, D84-D120. Available colors: fluorescent yellow / navy, fluorescent orange / black and fluorescent yellow / black. Compliant with: EN ISO 20471 Class 1.
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a mesh and textile liner and Gore-Tex membrane. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
Cut resistant glove made of HPPE and a black, abrasion resistant nitrile foam coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A light weight glove, high dexterity, touchscreen compatibility and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.3.4.2.C, EN407:2020:X.1.X.X.X.
Headband with adjustable ratchet, face screen and chincup in clear PC. Screen has an anti-fog coating. System with foldable hinge. In line with: EN 166 2 3 F
Electric insulating boot with epoxy coated steel 200J toecap. Foreseen with a rubber vulcanised outsole (fuel and oil resistant), antislip and tested against 35 KV, energy absorbing heel. Every boot is tested to 25 KV before leaving the factory. This boot is 100% waterresistant and adjustable in height. Easy to pull out through the 'hands free removal'. Needs to be retested every year. Resitance to hot contact 60 seconds 300°C. Liner in polyester, washable insole. Sizes: 35(uk3)/50(uk15).
Warm navy fleece with a 100% polyester mesh lining and a reflective horizontal band around the body and the arms. Two bags with zipp er and a breast pocket. Suitable to wear in conjunction with the Parka Iona S433. Available in sizes S-XXL.
Replacement hood for hood S-757.
Fire-resistent facial seal as spare spart of hoods M-series.
Martor replacement blades 5232. Packed per 10 pièces. No PPE.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Earmuff X1 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. Small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 27dB.
This body warmer has a traditional fit. The extended back ensures that the back stays covered during bending. The vest offers plenty of storage space with 6 pockets on the front and 2 inside pockets, 1 of which is suitable for the phone. The vest is opened with a printer zip. The armholes are provided with elastic wind catchers. Quality: 65% polyester / 35% cotton, plain weave, 160 g / m². Available colors: navy, black and white. Available sizes: XS-5XL.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. BOA closing system. TPU-scuffcap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Low shoe in leather/textile, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-47.
The DX4 Hi-Vis Softshell is designed using a revolutionary breathable, waterproof and windproof ripstop fabric. The sport-inspired design includes a longer back length, dynamically shaped sleeves, adjustable cuffs, reflective piping and multiple pockets for ample storage.This softshell is made with premium HiVisTex Pro tape and offers excellent freedom of movement thanks to its segmented construction. Outer fabric: 92% polyester, 8% elastane, laminated to 100% polyester micro polar fleece 310g Lining of the fabric : 100% Polyester Mesh 165g Contrast Fabric : 92% Nylon, 8% Elastane Standards EN ISO 20471 Class 3 RIS 3279 TOM Issue 2 (Orange Only) Waterproof / Breathable WP 8,000mm, MVP 3,000g/m²/24hr
ABE1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boil ing point >65 °C, sulphur dioxide, acidic gases and vapours. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust f ilter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
Pre-formed, washable and reusable earplugs made of soft foam rubber for a perfect fit. Fitted with vinyl cord to prevent loss. 50 pa irs per package.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
This glove, made with the very latest Dyneema® Diamond Technology 2.0, provides unparalleled comfort combined with high cut resistance and high fingertip sensitivity, and this for tough work. This without using glass fiber! The patented foam nitrile coating provides a solid "oil grip" and is extremely durable so that it can be worn longer in abrasive applications. The glove also offers short-term protection against contact heat up to 100 ° C. The cooling effect of the fiber provides the necessary comfort during the entire working day! Intrinsically one of the most cut resistant fibers available at the moment !! Available sizes: 7-12. Conforms to EN388: 2016: 4.X.4.3.D and EN407: X1XXXX
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Full peak. With woven ventilation opening along the side. Size: 54-62cm.
Gloves made of heavy cowsplit leather. The gloves are lined and have a rubber reinforced cuff (7cm), elastic in the back and protection at the knuckles.
Flame retardant and antistatic long sleeve t-shirt in Cantex Jersey AT (59% modacrylic/39% cotton/2% antistatic) (190g/m²). Round neck, ribbed cuffs, heat sealed segmented reflection striping. High visibility yellow accents on shoulders for better visibility. Available sizes: XS-4XL. Available colours: navy/hi-vis yellow.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Innovative hi-vis pants with multifunctional holster pockets, knee pockets with opening at the top and a multi-layered thigh pocket for, for example, a telephone, keys or tools. Reinforced Oxford cloth in places where clothing wears first and triple-stitched seams for maximum durability. Quality: 65% polyester / 35% cotton. Available sizes: 28"-48". Available colors: Fluo yellow / navy, fluo orange / navy, fluo yellow / black and fluo orange / black. Complies with: EN ISO 20471 class 2.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 2500 volts, operating voltage of 500 volts. Length 36 cm, Sizes: 6-12.
Blue knitted food approved glove from the Revillet range (per piece) in polyethylene, polyamide, stainless steel fiber with long knitted cuff, does not contian glasfibre. This glove has excellent cut resistance, tested according to TDM standard (ISO 13997 TDM: 62,80 Newton). Treated to be permanent hydrophobic. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5,12 and 13 on demand.
Premium men's jeans with 2% elastane that provides extra comfort. These jeans are a jog denim. Quality: 99% Combed cotton / 1% Elastane, 360 g / m². Available sizes: 29 - 40. Available colors: Jeans blue.
White gloves made of light cotton. Sensitect gloves have a perfect fit, and are ergonomic and extremely comfortable due to the Interlock quality. Can be worn either as a liner glove or for product protection.
Lightweight and very comfortable face shield, 450 x 250 mm. With individually adjustable headband and forehead protection. Polycarbonate visor: good impact resistance, heat resistant up to 130 °C. Suitable for: general industrial applications.
Black safety/fire fightingboot in nitril rubber with 200J non-metallic toe cap and synthetic anti-perforation sole(Sizes 36 and 37/38 toe cap and synthetic anti-perforation sole in metal). Outsole in nitrile. This boot offers an excellent protection against heat with emission of chemicals and contact with flames.
ChemMax 3 PLUS with NeoSol EC27F gloves + PULL CORD.
High shoe in black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
High shoe in black velours leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 42.
High welding shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a velcro and breathable, abrasion resistant liner in textile. Outsole in PU/Nitrile, SRC antislip, oil and carburant resistant. Fire proof stitching in para- aramide. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 38-48.
