BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
ABEK1HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 1 gas filter: for max. concentration of 0.1%.
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Screen seal as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Cover for TR-600 can be combined with filter TR-6710E.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted w ith non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in t he mask. Masks packaged separately. NPF: 50.
Atex Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Replacement hood for hood S-655.
Dust mask, class P2, for harmful dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the sh ape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moi sture in the mask. Fitted with non-adjustable, elastic headbands. Protection against acidic gases < MAC value thanks to active carbo n layer. NPF: 10.
P2 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M half and full face masks when used with filter holder 603 and dust filter holder 501. Protects against harmful dust, mist and smoke particles.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-600 and TR-800.
Charger with power supply as accessory for motor unit Versaflo TR-300, can be expanded with multi-charging station TR-342-3 to charge up to 10 batteries.
Spark catcher as accessory for motor unit Versaflo. No PPE.
Lightweight air hood with inegrated bumpcap. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50, with Jupiter and compressed air, NPF: 500 with TR-300, TR-600 and TR-800.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. Sizes: S, M and L. NPF: dep endent on the filter used.
Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.
Long hose of lightweight PU that connects between Versaflo or Jupiter motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo or Jupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length: 965 mm.
Air hood with safety helmet PC/polyester with hinged visor and fire resisteant Nomex full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 200 with compressed air, 500 with Jupiter or Versaflo. processes involving chemical risks.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Air regulator in Zytel (glass fibre reinforced polyamide) on belt for use in combination with 3M air hoods with bayonet coupling.Fitted with pressure reducer that eliminates any pressure fluctuations from the compressed air line, which provides improved comfort because the airflow remains constant. With regulator to adjust the air flow in the airhood. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 3.5 - 8 bar. NPF: 50 with M-100 and 200 with all other compliant hoods. Minimum airflow 170 l/min, max. 305 l/min.
Tool to fix the atex battery TR-830 to the Atex motor unit TR-802E. No PPE.
External fire resistent collar as spare spart of hoods M-406, M-407. No PPE.
Foldable mask, class P3 for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. With handy lips to unfold the mask easily. Fitted with non-adjustable, elastic woven headbands. Masks packaged separately. This mask does not contian any components of latex rubber, or PVC. NPF: 50.
Foldable mask, class P2, for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. Masks packaged separately. NPF: 10.
P2 dust filter from 3M for direct connection to 3M half and full-face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter!
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
Protective cover disposable for air tube in PU convenient for air caps.
Lightweight breathing hood made of WEB 24 with PE visor. Hood with neck and shoulder protection. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. With internal knit collar under the hood for better sealing. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Internal collar as spare spart of hoods M-406, M-407. No PPE.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%. Sizes: universal. NPF: dependent on the filter used.
Charger with power supply for 1 battery of the motor unit TR-600/TR-800, can be expanded with multi-charging station TR-642E-3 to charge up to max 10 batteries.
Foldable mask, class P3 for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Masks packaged separately. This mask does not contian any components of latex rubber, or PVC. NPF: 50.
Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.
xABEK2HGP3 screwfilter DIN 148 in synthetic capsulation. Protects against organic and inorganic gasses, sulphur dioxide, ammonia and high toxic dust-, haze- and smoke particles and mercury vapors. To combine with full mask with standard screw thread. Filter of class 2: until max. concentration of 0,5 %. Weight: 370 gr. Convenient for: processes with chemical risks. In line EN 141.
Set of 3 replacement filters for Aircare filter unit.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
Fire resistant protection seal for breathing tubes BT. No PPE.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
Interior mask with nosepiece valve for full facemask 6800.
Replacement hood for hood S-657.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.
Chin strap as accessory of hoods M-206, M-207, M-306, M-307.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow SC motor unit. Weight: 450 g.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve.Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.
Male rectus threaded coupling for equipping V-500, V-100 and V-200 with male coupling.
Turning mechanism for the screen as spare spart of hoods M-106, M-107, M-306, M-307, , M-406, M-407. No PPE.
Cover for TR-600 can be combined with filter TR-6310E.
Kit to connect Peltor hearing protection to the Versaflo hoods M-series.
REAKTORHGP3 screw-in filter DIN 148 with plastic case. Protects against radioactive iodine, highly toxic particles, and smoke and haze particles. For use with a full-face mask and standard thread. Weight: 307 g.
Radiant heat cover to cover head and shoulders for airhoods M-400. No PPE.
Lightweight disposable breathing hood with hood made of PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Belt, decontaminable, as spare spart for motor unit Versaflo. No PPE.
Durable leather belt for TR-600/TR-800
Frame of the screen as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
external high resistent collar as spare spart of hoods M-406, M-407. No PPE.
ABEK1P3 filter in plastic housing for 3M Secure Click half face masks. Protects against anorganic and organic gases and vapours with a boiling point > 65°C, sulphur dioxide, acidic gasses and vapours, ammonia, organic ammonia derivates and toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%.
Disposable S-922 visor protectors (tear offs) for breathing hood S-600, S-700 an S-800. Prevents wear and damage of the visor.
Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.
Dust mask, class P3, for toxic dust and nuisant levels of acid gas benath the TLV. Mask with nose bridge and seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask during use. Fitted with non-adjustable, elastic headbands. NPF: 50.
New multi charging station for 3 batteries, high capacity, as accessory for motor unit Versaflo TR-600 and TR-800. Without power supply.
disposable S-920 visor protectors (tear offs) for breathing hood S-133, S-333, S-433 and S-533. Prevents wear and damage of the visor.
