BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 50. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
Foldable mask, class P2, for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 10. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
Dust mask, class P3, for toxic dust. Mask with seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 50.
ABEK1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5 935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%. Suitable for : processes involving chemical risks.
ABEK2HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 2 gas filter: for max. concentration of 0.5%.
Protection film for screen as accessory of hoods M-106, M-107, M-306, M- 307, M-406, M-407. No PPE.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fit ted with non-adjustable, elastic headbands. NPF: 10.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Very comfortable half-mask made of silicone rubber, fully maintainable. Fitted with adjustable head and neck bands for precise adjus tment of the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6 057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fil ter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
P3 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against toxic dust, mist and smoke par ticles.
Dust filter holder for attachment of dust filters 5911, 5925 and 5935 to 3M gas filters. Also for use in combination with filter hol der 603 for direct connection of dust filters 5911, 5925 and 5935 to 3M half and full face masks.
P filter for motor unit Versaflo TR-300. Protects against highly toxic dust,mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. In line with: EN12941.
A2 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 2 gas filter: for max. conc entration of 0.5%.
ABE2K1HGP filter for motor unit TR-600 and TR-800. Protects against organic and inorganic gases, sulphur dioxide, ammonia, mercury vapour and dust particles. Can be combined with filter cover TR-6500FC.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask, with new improved exhalation valve. Protects against organic gases and vapours with a boiling point >65 °C, plus harmful dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve.Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%. Sizes: universal. NPF: dependent on the filter used.
Coated polycarbonate screen as spare spart of hoods M-106, M-107,M-206, M-207, M-306, M-307, M-406, M-407. No PPE.
Adjustable comfort pad for head band with turning button.
Polyurethane hose that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Length: 525 - 850 mm. Hose adaptable in length. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick- connect coupling.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. Sizes: S, M and L. NPF: dep endent on the filter used.
Lightweight disposable breathing hood with hood made of WEB 24 and visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 100 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Replacement hood for hood S-757.
Fire-resistent facial seal as spare spart of hoods M-series.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. In plastic housing for extra protection against spatters.
ABE1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boil ing point >65 °C, sulphur dioxide, acidic gases and vapours. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust f ilter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
Haevy duty backpack in flame retardant fabric to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
Comfortable half-mask made of silicone rubber, compact form with good fit to the face. Fitted with adjustable head and neck bands for precise adjustment of the mask. With the quick release system it's very easy to don and remove the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
Fire resistant air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6300FC.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Visor in actetate in order to be able to clean the visor with thinner. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Prefilter as spare spart for motor unit Versaflo TR-300. No PPE.
Synthetic wipes, soaked in non-aggressive liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 170 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
ABEP filter for TR-600 and TR-800 motor unit. Protects against organic and inorganic gases, sulphur dioxide and particulates. Can be combined with filter cover TR-6100FC.
Dust mask, class P3, for toxic dust. Mask with nose bridge and seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the ma sk. Mask has rigid cup form for better retention of the shape of the mask during use. Fitted with non-adjustable, elastic headbands. NPF: 50.
Pre-filter for TR-600. Ensures longer life of main filter.
P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
Lightweight air hood with inegrated bumpcap. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50, with Jupiter and compressed air, NPF: 500 with TR-300, TR-600 and TR-800.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
AXP3 filter in plastic housing for 3M full face masks. Protects against organic gases and vapours with a boiling point <65 °C, plus toxic dust, vapour and smoke particles. Only for use in combination with full face mask, and filter is for one-time use only. Suitab le for: processes involving chemical risks.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
Spark protector to protect filters against sparks.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted w ith non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in t he mask. Masks packaged separately. NPF: 50.
High capacity battery as spare spart for motor unit Versaflo. 10 to 12 hours with new filter. No PPE.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
P2 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M half and full face masks when used with filter holder 603 and dust filter holder 501. Protects against harmful dust, mist and smoke particles.
Dust mask, class P2, for harmful dust, welding fumes, ozone and'unpleasant odours. Mask with nose bridge and seal along the entire e dge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistanc e and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask. Fitted with adjustable, elastic headbands. Protection against ozone up to 10x MAC value. NPF: 10.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Comfort facial seal as spare spart of hoods M-106, M-107,M-206, M-207, M-306, M-307. No PPE.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
Easy-to-clean belt for TR-600.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
ABEK2P3 screw-on filter DIN 148 in synthetic housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads and motorunit Proflow. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 370g.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Backpack to carry the motor unit Versaflo TR-300, TR-600 and TR-800 comfortly on the back. Easy to clean and adjust.
Standard fabric belt as spare spart for motor unit Versaflo. No PPE.
High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against organic vapours < MAC value thanks to active carbon layer. NPF: 4.
Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.
