BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
ABEK1 filter in plastic housing for 3M Secure Click half face masks. Protects against anorganic and organic gases and vapours with a boiling point > 65°C, sulphur dioxide, acidic gasses and vapours, ammonia, organic ammonia derivates. Class 1 gas filter: for max. concentration of 0.1%.
New comfortable full face mask with unique filter connection, when you hear 'click' the filter is in the right place. Filters offer less resistance because they allow air to pass through on both sides and are close to the face. Exhalation valve at the bottom prevents condensation. Equipped with a push button that vacuums the mask onto the face, ensuring a perfect fit. Equipped with a speaking membrane for better communication. Available in 3 sizes: S-M-L. NPF: depending on the filter used.
Air hose with angled piece connection to connect motorunit Proflow with full face mask Promask.
Sweat Band for air hoods of the series and S-600 S-700. Thicker sweat band that reduces the circumference of the head harness for better fit.
Batteru for PV-300E motor unit (phantom vision).
Battery charger for PV-300E motor unit (phantom vision).
Kit of air duct S-960 that is placed on the supplied safety helmet G3000 and over which the hood S-605 pulls. Can be combined with the Versaflo motor units. Breathing hose and motor unit can be ordered separately.
Hood with air duct S-960 that is placed on the supplied safety helmet G3000 and over which the hood S-707 pulls. Can be combined with the Versaflo motor units. Breathing hose and motor unit can be ordered separately.
Versaflo air duct to be mounted on the 3M helmet G3000, and to be combined with hoses BT-20/BT-30/BT40, a Versalfo motor unit and one of the hoods S605/S-607/S-707, thus creating a complete head, respiratory and eye protection.
Costs for a hotel stay if the trainer has to travel a long distance for an on-site training.
This ready-to-use kit includes a PF2-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1135E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger.
A1P3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C , toxic dust, vapour and smoke particles.
Blue compressed air hose, 30 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Foldable mask, class P1, for irritating dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fit ted with non-adjustable, elastic headbands. Masks packaged separately. NPF: 4.
Foldable mask, class P2, for harmful dust bulk packing. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. NPF: 10.
