BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
A2P3 filter in plastic housing for 3M Secure Click half face masks. Protects against organic gases and vapours and toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%.
P3 filter for 3M half masks Secure Click. Protects against toxic dust, mist and smoke particles, ozone and annoying odor levels (not higher than the legal limit value at work) of organic gases and vapors and acidic gases.
Lightweight disposable hood for use with Versaflo powered air units (NPF:500) or with 3M regulators for connection to a compressed air supply (NPF:200). Equipped with an adjustable head harness. Available in size M/L. Supplied in packs of 5 pieces individually packed .
Motorgerät zur Kombination mit allen Kopfteilen der S- und M-Serie. Gebläseunterstützte Atemschutzsysteme beseitigen den Atemwiderstand, sind für Bart- und Brillenträger geeignet, Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-600E Turbo Unit, M-306 helmet, A2P filter, filter cover, pre-filters (x10), easy-Clean belt high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used. S uitable for: processes with chemical risks.
This ready-to-use kit includes a PF2-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
This ready-to-use kit includes a PF-602-ASB Powered Air Respirator, FF-602 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
Air heater with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can heat air a maximum of 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose in rubber of PU to hood not included. All usable buttons are made blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min. NPF: 50 with M-100 and 200 with all other hoods.
Replacement battery for motor units PF-602E and PF-602E-ASB
Protective foil for visor on Shogun full-face mask. Protects the visor against scratches and liquids.
Dust filter holder for attachment of dust filters secure click series D7900 to 3M secure click gas filters. No PPE.
Connection joint for expiration valve for full face masks of the 6000 series 3M.
A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.
Fit test adapter for testing the fit of a 3M personal mask. Only suitable for use with bayonet mounted filters.
Connection piece for S-series air caps. Connection piece for attachment on back of cap which makes that the air tube can be attached to the cap. Also needs a sealing ring to attach.
Sealing ring for S-series air caps which permits to attach the connection on the hood.
Hose of lightweight PU that connects between Jupiter or Versaflo motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S- series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo orJupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length. Length: 735 mm.
Combination of safety helmet G3001, air duct S-960 to be attached to the helmet and chemical resistant hood with shoulder cover S-805E. Can be combined with Versaflo air hose and Versaflo motor units, or V-500E for working on compressed air. This combination is extremely suitable when respiratory protection needs to be combined with a safety helmet.
Compensation per trainer who comes on-site for a 3M training.
Output for 2 persons / compressed air hoses to be installed on Aircare filter system.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Head harness as spare spart of hoods M-106, M-107. No PPE.
Spare hood for the 3M fittest kit FT10 or FT30. No PPE.
K1 filter in plastic housing for 3M half and full face masks. Protects against ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0 .1%.
Charger for batterie of motorunit Proflow SC and EX.
Buttons for the frame of the screen as spare spart of M-series hoods. 10pc
Fold Mask P3 for toxic dust. Comfortable three-piece folding mask with soft edges to increase comfort. With non-adjustable elastic headbands. Exhalation exhalation and lowers low C02 and humidity in the mask. Masks are packaged separately. NPF: 50.
Air deflector as spare spart of hoods M-306, M-307, M-406, M-407. No PPE.
Vaporiser to vaporise liquid in hood of fit test FT10.
Pre-filters for powered air respirators can extend the life of 3M™ filters by capturing large particles that would otherwise clog the filter.
Blower caps to protect the PAPR from dust and contaminent entry when no filters are attached.
Disposable cover for motorunit Proflow.No PPE.
Bitter test liquid (low concentration)for performing fit test. Content: 55 ml.
P2 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
P3 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
2 sealing ringlet to cover the Pro 2000 filters after use. No PPE.
P2 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
Spares pack PF-940 for powered air respirators PF-600E and PF-600E-ASB (former Proflow)
Insert for prescription spectacle lenses in the full mask of the Vision series. Glasses set with 52mm wire frame. No PPE
P3 screw-on filter DIN 148 in plastic housing with reduced opening. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow motor unit.
