BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Folding mask, class P3, for toxic dust. Comfortable 3-piece folding mask. With non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 50.
Low safety shoe in microfiber/textile with a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
Padded bodywarmer with breast and side pockets. Fleece lined collar. Internal windflap with chin guard to prevent chafing. Spacious inner pockets. Attachment for ID-card. Extended back. Reflective piping on the back and on pockets. Lining can be opened to facilitate printing and embroidery. Quality: 65% polyester / 35% cotton. Available sizes: XS-4XL. Available colours: Red, navy, grey, black, green, skyblue and kakhi.
Welding glove in top quality A-grade nappa leather with ergonomic protective cuff in red split leather. Extra comfortable because of a very high dexterity, an elastic on the back, a wingthumb model and strong kevlar seams. Suitable for industrial welding jobs (TIG) where high precision is required. Available sizes: 9, 10 and 11.
Hi-Vis T-Shirt with long sleeves and Cooldry yarns. This offers protection from the sun by a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Complies with: EN 20-471 class 3.
Full Zip Hi-Vis Sweater: • with contrast on the cuffs, shoulders and collar; • close-fitting fit; • sealed and segmented reflective tapes with stretch; • side zip pockets and spacious inner mesh pockets; • windstopper in softshell with thumb grip at the sleeve end. Fabric 1: 100% Polyester, Fabric 2: 90% Nylon, 10% Spandex. Colours: Fluo yellow/black, Fluo orange/black and fluo yellow/navy. Sizes: XS-4XL.
Scratch resistant, tempered mineral glass for protection against welding spatter. Dimensions: 108x51mm.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Fireproof battery bag to safely transport, store and charge small batterie of electric devices. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). Big enough for almost any bicycle battery. Dimensions: 215x160x145cm.
With rounded blades for secunorm 610 XDR (1059460)
Conical earplug made of polyurethane foam. The pressure is evenly distributed in the ear, resulting in optimal comfort. In line with : EN 342-2 standards (SNR 36).
Visor in clear polycarbonate. Heat resistant to temperatures from -50°C to 135°C. Dimensions: 450x220mm. Thickness: 1mm. In line: EN166.
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands with closure. The new IonicAir filter technology reduces breathing resistance by 30%.
Retractable hose (525-850 mm) in PU for Adflo motor unit.
Fireproof Blanket fiberglass. Size 120 x 180 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Low shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
Absorbent socks measuring 20 cm x 3 m. These heavy-weight socks are packaged in a bag. Packaged per 4 pieces. These socks can be eas ily connected together by means of hooks and rings. The yellow cord inside the sock provides extra solidity when picking it up. They do not absorb water, and they float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, v egetable oils and other water-insoluble chemicals. Absorption capacity: 316 litres.
Double lanyard, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Double Lanyard to allow continuous protection, even when switching between two anchor points. Fitted with one standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
This Plastic and Paper Sheet Cutter with concealed blade provides for swift and cutting accident-proof work. Designed for a whole host of applications: The Easysafe features a patented cutting head design allowing for easy initiation of the cut while maintaining blade contact with the material, even on single layers of film or paper. The piercing point allows for insertion of the cutter into all types of paper and plastic sacks. The integrated tape slitter safely cuts packaging tape without an exposed blade. The unit allows for an easy blade change 150; no tools required! The cutter is capable of being locked with a special key to change the blade. For use in the sensitive-products industries, e.g. food, designed to exclude hygienic risks resulting from unauthorized blade changes. No PPE. Blades: 1015780
Replacement knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Red life-jacket (inflates automatically), suitable for all waters and all conditions, e.g. extreme weather, when wearing heavy, protective, waterproof clothing. The jacket keeps you safe even during unconsciousness and will keep airways clear of the water.
Earmuffs X5 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New damping pads increased damping, and 'spacers': an extra seal ring that reduces resonance. Adjusted easily using 'grip areas' on the top and bottom, durable, ergonomic and very light in relation to a noise-reduction. Can be combined with 3M respiratory and eye protection. SNR: 37dB.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWÂ’s automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
Duolens glasses with modern fashion-look and extra eyebrow protection. Size is between the Pheos and the Pheos S. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. Frame: white/black.
Glove with full nitrile coating on low-lint seamless knit polyester/nylon liner. Glove with high sensitivity and good grip thanks to the rough finish.
Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F
Gray flame-retardant PU coating on 1 side, for strength and slip resistance. For light welding and grinding work. Vertical use. Free of asbestos. Short-term temperature resistance up to 600°C. Approved according to EN13501-1.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Women's Casma trousers with ARC protection: Closure with 1 hidden button / Front fly with zipper 2 inset pockets with flap and press stud fastening 1 ruler pocket with flap closed by hidden press studs elastic waist knee pockets Waistband with belt loops Double stitched (2x2) flame retardant reflective striping (50mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56. Available colors: Navy. In accordance with: IEC 61482-2: 2009 Class 1- ATPV 15.2 cal/cm², EN ISO 11612: 2015 / A1A2B1C1E3F1, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: 2005 + A1 : 2009 Type PB [6].
Multinorm FR702 long sleeve polo: Inherently flame retardant; Protects against radiant, convection and contact heat; Concealed button closure; Rib collar and cuff; Comfortable fit; Segmented reflective striping. Quality: Modaflame Knit: 60% Modacrylic, 39% Cotton, 1% Carbon Fiber 60% Modacrylic, 39% Cotton, 1% Carbon Fiber 210g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo yellow/black. Complies with: EN ISO 11612 A1, B1, C1, F1, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 4.4CAL/CM², IEC 61482-2 IEC 61482-1-2 APC 1 and EN ISO 20471 Class 3.
Softshell vest without sleeves: • two zipped side pockets; • breast pocket with zip; • two inner pockets; • hidden button band with chin guard at the top; • adjustable waist. Including Aviko logo on the left chest (50cm²). Quality: 96% Polyester, 4% Spandex. Available sizes: XS - 5XL. Available colors: Navy.
2-in-1 shower gel for hair and body with skin-friendly sugar-based surfactant conditioner. With fresh unisex fragrance. Content: tube of 250ml PPE category: not applicable. Previous name: Stoko Hair<(> &<)>Body
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C and formaldehyde, specifically for laboratories and hospitals. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dus t filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against organic vapours < MAC value thanks to active carbon layer. NPF: 4.
Dispenser for Spark Plugs for 500 pairs of earplugs. Includes Spark Plug earplugs. Wall holder not included. (Art: 1001186).
Access ramp for sump pallets. Dimensions: 650x800x160mm. Weight: 8kg.
Ergonomically shaped knee protectors made of rubber with a foam rubber cushion. The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
Super lightweight sportive spectacles (37g) in clear polycarbonate. Protective covering thanks to flat base curve. Lens inclination of 11° ensures good view downwards and provides the wearer safeness from stumble-accidents. Flexible frame with soft temples(XCT). With Supravision Clean coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Ladies version of the T-shirt exact 190 with short sleeves: - pre-shrunk material; - 1x1 rib knitted collar; - double-needle stitched sleeves and bottom hem; - with side seams. Quality: 100% ring-spun jersey cotton, 185 g / m². Available sizes: XS-3XL. Available colors: White, black, navy, red, orange, sport gray, pacific gray, royal blue, purple, fucsia, rose, yellow, brown, pacific green, kelly green, etc.
The Jane safety shoe, made from black full-grain leather and suede, is classified as an S3S safety shoe and specially designed to provide the perfect fit for women. This mid-cut model features an aluminium safety toe cap and a FlexGuard® composite penetration-resistant insert, which prevents sharp objects from entering the shoe from below. The rubber outsole offers the right balance of energy return, shock absorption, and stability for an optimal working experience.
Seamless liner of cotton/polyester, roughened green latex coating on palm and fingertips.
Comfortable waterproof gloves with multiple layers for extra protection. These gloves provide protection for the hands and arms against extreme cold and spatters of cryogenic liquids (liquid nitrogen). Indispensable for work in temperatures to -160 °C. Cryo Gloves are also extremely light and provide excellent tactility. Sizes: S / M / L / XL / length: 40 cm. Testing supports a Convective Cold level of 4 and a Contact Cold level of 2, but the Abrasion Resistance level of 1 allows reporting of Convective and Contact Cold levels of 1 only.
Standard facial seal as spare spart of hoods M-106, M-107, M-306, M-307. No PPE.
Safety knife with semi-automatic retraction for left and right-handers. Heavy zamak body with the slider on upper side for horizontal cutting. Replacement blades: 1016008.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 2,500 volts, operating voltage of 500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50.
Quick cleaning and disinfection of surfaces and equipment. Kills bacteria, mould and viruses in 1 minute. Non-corrosive. Also suitable for the disinfection of helmets, safety shoes and full-face masks.
Fall-prevention device, 2,5 metre webbing strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. With 2 carabiner hooks. Only for vertical use. Weight: 1.27 kg. Max user weight: 140 kg.
Safety knife with an additional slider on the back of the cutter. For work with triple-walled corrugated board boxes. MAXISAFE adapts to the type of cut required at the time, be it sideways, horizontal or straight from "up top". Designed for a minimum of effort at a maximum of efficiency. Ergonomically styled plastic handle with metal wear- protector at the blade outlet.Welcome the safest and most versatile knife mechanism in the world! For use by right- and lefthanders. "GS- TESTED FOR SAFETY". Easy blade change: no extra tools required. No PPE. Blades: 1024827
Flame retardant and antistatic buff with arc flash protection in 44% meta-aramid, 42% FR Viscose®, 6% Tencell®, 3% para-aramid, 3% AST, 2% elasthane. Keeps body temperature in cold environments. Very comfortable thanks to its elastic fibres and viscose®. Protects against heat, flames and arc flash risks. Dimensions: 25 x 50 cm. Available colours: navy.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 60 cm to 63 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Laces, black flame retardant. Length: 125cm. No PPE.
A smooth knit sock with elastane for snug, comfortable fit. Integrated toe seam. Merino wool 60%, Polyamide 35%, Elastane 5%. Sizes: 36/39, 40/44, 45/48. No PPE.
Glasses with clear polycarbonate duo-lens, equipped with supravision coating. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: blue/charcoal.
Brushed fleece body warmer with long zip. Brushed on both sides. Two front pockets, contrasting zips and decorative stitching on the sleeves. Elastic tape on the bottom hem and cuffs. Quality: 100% polyester, 280 g / m² Available sizes: S - 5XL. Available colors: Black, Navy, Lime, Gray, Blue and Red.
Cooling vest based on PCM technology to reduce heat stress and fatigue occur in very hot areas. Provides constant cooling at 3 different temperatures. Exterior: Robust canvas material, polyester mesh lining. 4 pockets for cooling packs. adjustable waist, zipper. Supplied without cooling packs. Available sizes: S-3XL. Available color: black.
The perfect protection for sporadic and light kneeling situations. This knee pad is non-conductive, silicone-free and made of foam r ubber. Good resistance to oil-based products. Sizes: 36 cm x 53 cm x 2.5 cm. Other sizes are also available.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 10.
Hairnet, polypropylene, flap, covers the ears. Available in: White. Diameter: 20-22cm.
Lightweight, lower-profile ear muff X4 with shells in TPU/ABS, with highlighted colors for better visibilty. Utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. Easy adaptable with 'grip areas". Durable, ergonomic and very lightweight with high protection against noise. Combinable with respiratory- and eyeprotection. SNR: 32dB.
Neck tube, Modaflame™ knit 200g. EBT: 4.3 cal/cm² (fabric). Conform: EN ISO 11612 A1, B1, F1 ASTM F1959 EBT = 4.3 cal/cm2, EN1149-5, GOST-R certified
Sporty and robust safety shoe with a fiberglass toe cap and flexible FAP® midsole for optimal protection. The upper in functional leather and textile, combined with a breathable lining and comfortable evercushion® footbed, ensures long-lasting comfort. The heat-resistant rubber sole (300°C), with ldCELL and Rotation Point, provides excellent grip and stability. Suitable for low-voltage electrical work.
Lab coat, Tyvek ®, 41gr. / M², anti-static treatment, inside seams, zipclosure, 2 patched pockets, collar. Available in: white.
Black, nylon bag with reinforced zipper for sports-type glasses.
P3 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against toxic dust, mist and smoke par ticles.
Pair of conically shaped earplugs, made of skin friendly memory foam, for protection against general noise. Fitted with neck cord an d sold in sets of 100 individually bagged pairs. Sizes: S and L. In line with EN 352-2 (SNR 33).
