BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. A bsorption capacity: 18 litres.
Anti-static absorbent pads measuring 41 cm x 51 cm. These medium-weight perforated pads are packaged in a box. Packaged per 100 piec es. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of chemicals, acids and bases or universal absor ption. The green colour identifies these wipes as chemical waste. Absorption capacity: 88 litres.
Reusable multi-gas detector with shockproof housing Simultaneously detects H2S, CO, O2, and %LEL. Standard with built-in pump, data logging, and event logging. Semi-annual calibration required. Battery life: Approximately 13 hours. Includes rechargeable battery and wall charger. Includes a 1m calibration hose with quick coupling, 3m sampling hose with particulate filter and quick coupling, and a set of spare pump filters (5 particulate filters and 5 hydrophobic filters). Concentration is always visible on the LCD display. STEL/TWA exposure records. With a filtered LEL sensor, calibrated to methane as standard. Alarm values: %LEL 10%-20%, H2S 10-15ppm, O2 19.5%-23.5%, CO 20-100ppm. Compliant with: 89/336/CEE and Ex ia IIC T4. IP class 65/67 and ATEX approved.
AB2E1 gasfilter in plastic housing for Moldex masks series 7000 and 9000for protection agains inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Knee pads for Dapro work trousers. Dimensions: Length of 24 cm and a width of 16.8 cm.
Disposable safety cutter for left- and righthanded. For opening different packages. The blade is not replaceable. In this way, the knife can not get lost. Again, the safety technique of recoil knife is applied. The knife fits in any pocket. No PPE.
Disposable knife/scraper, steady and functional. Suitable for the cutting of carton, paper and foil up to 6mm.
Fall-prevention device, 10 metre galvanised steel cable, with external shock absorber. Housing made of plastic. Serves as connection between anchor point and harness. For vertical (max 140kg) and horizontal (fall factor 1, max 100kg) use, and suitable to use with sharp edges. Weight: 6.6kg. Dimensions block: 39cm x 17.2cm, width 8.7cm Can be maintained.
Low shoe in water repellent velour leather, with a synthetic anti- perforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole Crazy+ in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Comfortable half mask in silicone with sealing profile for extra safety and longer life cycle. Remains soft and stable in shape even at extreme temperature (-10°C/+100°C)Equipped with ergonomically shaped head- and neckbands to accurately adjust the mask. Can be combined with gas filters 9100 to 9600. Filters 9010, 9020 and 9030 can be mounted on gas filters.
30m floating rope for lifebuoy.
High visibility gilet in 100% polyester (125g/m²). Horizontal and vertical reflective striping, velcro closure. Available sizes: S-4XL. Available colours: hi-vis yellow, royal blue, red, paramedic green, lime.
Synthetic leather glove, Winter-lined, 0,7 mm, Synthetic leather, Polyester, Fleece, Cat. II, Black, green, Chrome free, Waterproof, Winter-lined, Velcro®, for precision work. EN 388:2003, 1121 EN 511:2006, 11X
DuPont™ Tyvek® 500 Labcoat with zipper model PL309NP. Labcoat with collar, available in white and in sizes SM to 2X. Zipper closure. Without pockets. Elasticated cuffs (tunnelled). Stitched internal seams. Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added. Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others. Available sizes: S-2XL. Available colours: white.
Safety helmet in Phenol, resistant to extreme heat, molten metal parts and sideways slant. Resistant to chemicals. Cradle with linen bands for increased comfort. Sweatband all around the helmet in full grain leather. Sizes 53-61 cm. Weight: 400g.
Coverall with a focus on safety and comfort. Characteristics include knee pockets, back fold and adjustable cuffs. In addition, there are functional pockets and a hammer loop. Hi-Vis reflective striping on the chest, arms and legs to be clearly visible. Quality: Kingsmill 245g (65% polyester / 35% cotton). Available colors: navy and black. Available sizes: S-4XL.
Skipper unit with 9m ribbon length in red/white. Can be attached to traffic cones, Skipper cones and Skipper's 1m safety posts. You can also attach Skipper directly to walls and magnetic surfaces using a support bracket. The Skipper range includes useful accessories such as a sign holder, safety light and receiver clips. The Skipper unit is robust and reliable thanks to the high quality materials and fabric tape. Suitable for outdoor use.
Very light and ultra comfortable all round glove constructed on a 18-gauge polyester and spandex liner with thin and smooth protective nitrile coating. Offers heat protection up to 100°C during 15sec. Ideal for precision work. Food approved. Touch screen fonctionality. High visibility yellow. Sizes : 7 (S) - 11 (XXL)
Protective eye shield for Kask helmets Plasma, Superplasma and HP. Easy to install. Sratch- and fog-resistant.
Flame retardant and antistatic ladies pants in strong inherent flame retardant material with an increased visibility at the bottom of the legs. Concealed zip, 2 deep side pockets, 2 back pockets with flap, folding ruler pocket, separate leg pocket and knee pockets. Available sizes: 36-46 EU. Available color: navy. Compliant with: EN ISO 11612 A1A2B1C1E3F1, EN 1149-5, EN ISO 11611 Class 1, EN 13034-6, IEC 61482-2 Class 1 (ATPV: 15 cal / cm²) PPE category 3.
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate recyclable bag.
High shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breat hable, abrasion resistant 3D liner in textile. UTURN closing system. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Compact mandown alarm. Comes with wristband, docking charging station and USB charging cable as standard. Equipped with GPS and WIFI. Can also be worn on belt if optional accessory. Requires pinless SIM card with data (not included). Must be programmed via web application. With alarm button. Dimensions: 58x42x16mm; 60gr. IP67
Sweatband in leather. Suitable for cradles of Peltor helmets. Not separately tested as PPE.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. NPF: 4.
Visor in green polycarbonate, gold coated. (Screen carrier to buy separately: 1014838 or 1000801). Resistant to high temperatures from - 50°C to +135°C. Dimensions: 500x250x1mm.
Fireproof Blanket fiberglass. Size 180 x 180 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 2.5 kg. Cord 30m available (art. 1032349).
Adapter 3712 for helmets with standard 30 mm slot (1100, 1125, NEXUS). Not for Concept helmets of Centurion.
High shoe in microfiber/cordura, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU (Wellmaxx), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Boot in waterresistant oiled leather, with an steel antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner. Outsole in PU/PU, SRC antislip. Sizes: 35-49.
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: yellow/black.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
Superior quality gloves in cowsplit leather, made with Kevlar® fibres for longer service life. The gloves have extra palm, thumb and index finger reinforcement and a 10 cm protective cuff. Available in: green/white. Size: 10, 11, 12.
Blue plastic work floor with black removable grid. Absorption capacity: 130L. Dimensions: 1260x860x150mm. Suitable for small packages. Corrosion-resistant. Weight: 20kg.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with ha lf and full face masks with standard threads.
Apron 90 cm wide, 120 cm long, with reinforced front patch, duotex: 100% polyester fabric with PVC coating, 300 gr/m²
Grey safety goggles type Skylite with soft orange DCT element. Offerscomfort and a profound protection. Adapts to the face perfectly.Combines the security of goggles with the comfort of a pair of glasses.Plastic frame and clear polycarbonate lenses. Plastic frame and clear polycarbonate lenses. All Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres, this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
ABE1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic and inorganic gases and vapors with boiling point >65°C and sulfur dioxide. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Eye/face wash with innovative eye-rinse system directed away from the nose and towards the outside of the face. Manual valve, chrome-plated Eye/face wash spray head made of green ABS plastic. 2.4m hose made of green PVC. Incl. wall bracket with hanging loop made of black ABS plastic. Water connection adapter: 1/2" male thread.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
Eco Midi cleaning paper according to the european ecolabel. 100% pure. Dimensions: length: 300m, width: 20cm. 1-layer. Package: 6 roles in one box.
Goggle with large field of vision, vented indirectly. UV-resistant acetate clear lens with antiscratch and antifog coating. Large adjustable headband with rotating anchor point, can be worn with most corrective glasses.
Black life-jacket (automatic inflation) with 3D collar and soft outer cover. The collar is held on the collar band on the back for extra comfort at the neck. The jacket is extremely well finished with piping. The jacket has a minimum buoyancy of 165N. Available in different versions, such as automatic or manual. Standard with leg strap
Burnshield responder kit to be used on first, second, third degree burns · Ideal for ambulance, fire, police, emergency responders and first aiders. Content and dimensions: Burnshield® Responder Kit: 8 Burnshield ® compresses 10 x 10cm 3 Burnshield® pads 20 x 20 cm 2 Burnshield® pads of 60 x 40 cm 3 Burnshield® pads 2.5 x 0.5 cm 2 Burnshield® pads 1m x 5cm 3 Burnshield® gel 125 ml 1 Roll of adhesive plasters 2.4 cm x 5 m 2 Rolls bandages 2 Rolls Soft foam bandage 1 Pair scissors 2 Pairs gloves 1 Rescue Blanket 2 m x 1 m Packed in a bag with the dimensions 33 x 25 x 14 cm
Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.
Safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. Created for the thickest carton boxes! The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Dimensions: 154 x 22 x 67 mm Weight: 151g Depth: 21mm Blades: 1021313
Sportive spectacles in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside and easy to clean.
A flexible glove with cutting, perforation and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and fingertips from needles and other sharp objects. Knitted in cut-resistant HDPE fibre, giving the whole glove protection level 5. Provided with PU coating from fingertips to over knuckles and therefore suitable for cleaning or working in wet conditions. Extremely wear-resistant coating. Sizes: 8-11.
Offers protection against electric arcs (class 2). Very lichtweight, flame retardant and antistatic rain jacket in 100% polyester with a highly breathable ePTFE membrane (Gore Pyrad™ technology)(215g/m²). Flameretardant lining in 50% aramid/50% viscose (115g/m²). Zip closure under flap with velcro, 2 front pockets with flap, chest pocket with flap, adjustable cuffs through velcro straps, elongated back, 2 loops for badge, vertical and horizontal reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Long john with fly in 100% polypropylene (130g/m²). Elasticated waist, stitched seams, good breathablity and moisture management, thermally insulating, stain resistant, comfortable and ecologic. Available sizes: S-3XL. Available colours: grey anthracite. No PPE.
Dual toolbelt holster with retractors. No PPE.
Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Semi- orthopedic insole which is conform to ESD. Sizes: 38-48.
Expiration valve Cool Flow for series 6000, 6500 and 7500 masks.
Boot in PVC, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 37-47.
Low shoe for women in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Very light safety spectacles with polycarbonate lenses. 3M ™ Pressure Diffusion Temple Technology that helps distribute pressure across the ears to improve frame comfort for a firm and comfortable fit. The 3M ™ Scotchgard ™ Anti-Fog Coating offers superior anti-fog and scratch-resistant properties.
Multirisk rain trousers with igh level of protection but still light in weight. The Hovi hi-vis trousers are a waterproof rain trousers with ARC protection in a light and improved Siopor® Excell fabric. The 3-layered fabric protects excellently against foul weather, heat, flames, welding sparks and the risks of an electrical flashover. These high-visibility trousers are soft and supple, making them a pleasure to wear in potentially hazardous working environments. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m²; 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Available colours: Fluo orange/navy and fluo yellow/navy.
P3 RD Elipse replacement filter for usage on Elipse Integra masks. Pack of 10 paires..
Hi-vis trousers Belenos 12433 with: 2 front pockets; 2 back pockets with flaps; 1 thigh pocket; 1 ruler pocket; Knee pad pockets Cordura. Stretch elements M-move Industrial laundry Quality: Recycled polyester / LYOCELL 65% 35%. Available sizes: 42-66 BE. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 1.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Flame retardant and anti-static hi-vis waistcoat: V-neck; Zip closure; Without sleeves; Flame retardant reflective tape (50mm); Back length 70 cm. Quality: 98% polyester + 2% AST; ± 120 g/m². Available sizes: S-3XL. Available colours: Fluo yellow and fluo orange.
Safety glasses made out of polycarbonate that also fit perfectly in combination with respiratory masks and do not fog up. he particularly snug fit is the result of our high-tech lens design and the flexible sealing lip. Rubberised side arms for a comfortable and non slip fit.
