BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Baseball bumpcap with reduced peak (55mm) and ABS protection. Sizes: 52-65cm.
PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR, B-S-WR and pheos alpine (+adapter) and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Comfortable fire retardant bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. Protective liner is removable. Size: 53-63cm.
Green safety boot from the Acifort range (Acid+Confort) in PVC/Nitrile rubber for a good chemical resistance, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC/nitrile rubber with tread resistant against dirt. Wear resistant and confortable through the optimum grip. Sizes: 39-48, 49/50.
Face shield in clear polycarbonate, length 230 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 8 9.
Dark grey hearing protector with HiViz green element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Low shoe in oiled nubuck leather with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
2-point textile chinstrap, compatible with V-Gard helmets.
Lined wind and waterproof jacket with taped seams: • 2-way zip with flap covered with a snap closure • double breast pockets with flap and velcro closure • waterproof zippers • loop for badge holder • side pockets lined with fleece • three large inner pockets • removable and adjustable hood • adjustable sleeves with velcro • adjustable waist • extended back Quality: 100% polyester, 200 g / m² Color: Navy, black and gray. Sizes: XS-4XL.
Version with pointed blade, maximum cutting depth: 19 mm. Lightweight all-purpose safety knife made from recycled plastic. Ambidextrous slider for extending the blade. Automatic blade retraction. Easy blade replacement. Replacment blade: 1016008
This polo shirt has a contemporary fit and is particularly color and shape-retaining. The tailored model with side slits has a 3 button closure and is made of 50% combed cotton and 50% polyester. This polo is available in 13 different colors so you can always adapt your workwear to the corporate identity of your company. Quality: 50% cotton / 50% polyester, Piqué, 180 g / m². Available sizes: XS-3XL.
Harness to carry fan units SR500/SR700 on the back. No PPE.
Compact personal alarm for lone workers and company first responders. The personal alarm can be used to alarm and to receive alarm messages. You can alarm by pressing the emergency button, by pulling the neck cord, via the man down function when there is no movement or lying position and via the timer function. The device has a talk-listen connection so that communication can also be done via speech. The TWIG Neo features GPS/GNSS for outdoor location determination. The personal alarm is often used by company first responders, deposit service technicians and healthcare professionals. The device can be worn around the neck and on the belt. The TWIG Neo comes with belt clip, charger and charging cable.
Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.
Isotec S5 safety boot in ultra chemical resistant and flame resistant material with steel toecap and steel antiperforation sole. Removable, washable insole. Vulcanised rubber sole, oil resistant, non-slip and heat resistant up to 300°C (contact heat). With shock absorbent tunnel system in the heel. Colour: black. Available: 35-50. substances.
Extra long and thick single use glove for veteranary use or use in impoundments made of PE. Liquid tight, does not protect against c hemicals.
Low shoe in waterrepellant microfiber, with a synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D-mesh. Outsole in PU Light/PU, SRC antislip, oil and carburant resistant. Removable, Soft Light insole made from ultralight expanded polymere. Sizes: 35-48.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of full-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 315 x 200 mm.
Sweatband for suspension of Iris helmet. Not separately certified as PPE.
Dust mask, class P3, for toxic dust. Form-retaining mask thanks to Dura- Mesh shell on the outside of the mask. Mask always retains itsshape,even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels ofCO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. The pleated filter technology reduces breathing resistance to 50%. Non reusable. Fitted with adjustable, elastic headbands with closure. packed per piece. NPF: 50.
SP65 Axion eye and face wash system with adaptor for models 7260BT Axion, 7261 Axion, 7460BT Axion and 7461 Axion. Conform: EN15154.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
Polyurethane hose that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Length: 525 - 850 mm. Hose adaptable in length. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick- connect coupling.
Medium oily, silicone-free care cream for use after work. Stokolan sensitive penetrates rapidly and is suitable for any type of skin. Free from perfume, preservatives and colourants Dermatologically certified and skin-friendly With 9.5% natural moisturising factor (NMF). With ECARE quality label for allergy-friendly products with creatine and other oily, moisturising components. In line with HACCP and suitable for use in the food industry Easy to rub in Description: Soft Cream (O/W-emulsion). Free from perfume, preservatives and colourants, silicone and parabens. Suitable for hands and face. Content: tube of 100ml.
The Secure Fit safety spectacle is comprised of a rimless lens and fixed-length temple arm. An integrated side-shield is included for added protection. Temples also feature 3M Pressure Diffusion Temple Technology which helps diffuse pressure over the ear to enhance frame comfort across a diverse workforce. This innovative design promotes improved comfort and security of fit.
S3S boot: 100% metal-free, specifically for outdoor and construction work, stable and good grip.
Looking for a sporty and agile safety shoe? The ultra-light E-BOUNCE S3S BLACK/ORANGE lets you move effortlessly. Thanks to the sole that returns energy with every step, you experience a unique "bounce". This allows you to work comfortably, fit and optimally protected all day long. Lightweight and dynamic Energy-returning sole Anti-slip sole Sizes 36-40 made on a narrow last
Comfortable and lightweight plastic safety glasses with trendy temple design and soft nose bridge.
High-cut safety shoe, type outdoor, in brown, water resistant cowgrain leather with toe bumper. Steel safety toecap and antiperforation sole. 3D inner lining for optimal ventilation. The Vibram (PU/Nitril) walking sole is heat resistant up to 300 °C and resistant to hydrocarbons and oils. Self-cleaning lugs.
Elbow band for work that results in long periods of elbow strain. This band spreads the pressure on the muscle attachment point over the larger muscle mass of the lower arm, which reduces development of pain. Prevents stress-related injuries of the arms. Sizes: S / M / L / XL.
White laboratory jacket with press-studs, made of polypropylene (40 g/m²). Without hood or pockets. Available in: white. Suitable fo r: agricultural and food industry. Sizes: M-XXL. Compliant with: PPE category 1.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Carry bag for full face mask 3S. With handy shoulder strap. Ideal for dust-free storage of full face mask and filter. Dimensions: 295mm x 200mm x 295mm.
Universal anti-fog visor (1.15 mm) made of cellulose acetate. Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso. line with: EN 166, EN 170.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Welding glasses with yellow synthetic frame, with elastic headband for a perfect fit. Fitted with a flip up part and lens with green welding shade.
Plastic box for moldex mask.
High shoe in black nubuck leather, with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Fallline length 1.5 meters, diameter 10.5 mm. Kernmantel line, on one side a standard snap hook and on the other side scaffolding hook Maxitube.
omfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools. Sizes: S/M - L/XL.
Refill for first aid panel: Refill pack of 6444 textile plasters. 1 Refill pack contains 6 X 40 plasters.
Parka ripstop, 100% polyester ripstop with PVC coating, waterproof, taped seams, reflective piping, inside partly quilted polyamide partly fleece, zip with flap and Velcro, hood in the collar, lined, adjustable drawstring, elastic cuffs, elastic waist.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Maximum working tension: 17000V AC - 25500V DC. CEI 61111: 2009. Material: elastomere. Colour: grey. Packaging: 1m2. 3 mm thikness. Upper side ribbled, flat underside.
Hood, 48.5% Meta-aramid, 48.5% viscose FR (lenzingFR), 3% belltron.fire retardant, long collar, oval face opening. Available color: blue. Sizes: 1 size.
Boot S3 in black, heat resistant full grain leather. Toe cap in steel and synthetic anti-perforation sole. Lining in leather with heatresistant garments. Outer sole in Nitril STEINAU. Removable insole in Basic Grey. Sizes: 39 - 50.
Extra high ranger boot for foundries in full grain leather with 200J steel toecap and anti perforation sole in steel scuffcap in PU. Closure: laces + zip. Fitted with a leather liner, padded tongue and interior insole made out of leather. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/Nitril with heel, longwearing, with very good slip resistance SRC and oil, fat and acid resistant. Laces: 1035603. Sizes: 39-49.
Flame retardant, anti-static fleece, double sided fleece: 54% protex/34,2% coton/10% nylon/1,8% AST; 310 g/m², soft fleece material, good cold protection, breathable, can be zipped into different jackets, anti-pilling treatment, Stitched seams, straight collar, zip closure under flap with touch <(>&<)> close fastening, 2 inset pockets with zip closure, round inset sleeves, elasticated cuffs, elastic drawstring in hem , 1 inside pocket .
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Length 41 cm, Sizes: 7-12.
Black fitover safety glasses with pressure-free fit and hinge (foldable). Very light, fits over most prescription glasses. Frame in synthetic material and CBR65 polycarbonate lenses with integrated side shields. The innovativetemple concept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With Supravision Excellence coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-3XL. Available colors: fluo yellow / navy. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 class 2 and EN 13758-2.
Overshoe in nonwoven PP with strong anti-slip sole in PVC. Color: white on top and blue on the sole. Size: 170 x 410 mm, no PPE.
Multirisk trousers with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, elastic at the waist. Quality: 79% / 20% / 1% Kat / Poly / AS. Available sizes: 44-66 HAV. Available colors: Blue / gray, gray / yellow and black / gray. Conforms to: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
With a contemporary fit, a slim neck collar and a natural stretch, this T-shirt is a versatile and comfortable choice for the workplace. The shirt is made of 100% combed, ring-spun cotton, which contributes to the good quality and neat appearance. Quality: 100% combed cotton, single jersey. Available colors: Red, orange, royal blue, navy, ink, black, white, lime, purple, turquoise, dark gray, army green. Available sizes: XS - 5XL.
Green boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
Sweat band in black PU for helmet Pheos Alpine. Not certified seperatly as PPE.
Complete kit with SR 500 fan unit and protective helmet SR 570, 1 protective film, standard battery, battery charger SR513, belt SR508, 2 pieces of SR510 P3 particle filters, 2 filter adapters, 10 prefilters SR221, 2 prefilter holder, flow meter, plug kit, cleaning tissue and user instructions. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
The FH1 visor holder is compatible with the G3000/G3501/X5000/X5550 safety helmets. Includes a unique system to replace face shields in just seconds.
Replacement hood for hood S-655.
Replacement visor (anti-fog and hard coating) for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. 5-piece packaging. No PPE.
Full set with Speedglass Heavy duty welding helmet G5-01 with welding filter G5-01/03VC, adflo motor unit for high altitudes, and carrying bag. Not suitable for use in confined spaces. The large clear visor (104x170mm) is curved and provides excellent visibility in all directions. The welding filter's natural color technology provides a lighter, more detailed and colorful view, and switches on/off automatically. The airflow is adjustable on the face, visor or anywhere in between. The helmet's slim profile and ergonomic design makes it even lighter and easier to work in tight spaces.
These unisex thermal trousers have long legs and are suitable for both men and women.
Charger with power supply as accessory for motor unit Versaflo TR-300, can be expanded with multi-charging station TR-342-3 to charge up to 10 batteries.
Orange insulating natural rubber gloves. Their thinness and grip surface make them easy to handle. Excellent dexterity. Sensitive to touch, maximum grip in wet conditions. Working voltage of 1,000 volts, test voltage of 5,000 volts. Sizes: 7–11 Compliant with: EN60903 Class 0, AZC. Arc Flash: ASTM F2675. ATPV: 12 cal/cm².
The first disposable glove resistant to acetone for at least 15 minutes. This glove features an innovative multi-layer design with Type A chemical resistance. Enhanced mechanical protection. The striking orange color improves visibility. Sizes: 6,5-7 to 9,5-10 length: 285mm, thickness: 0.50mm Compliant: EN388: 2110A EN374 TYPA A: JKLOAPST VIRUS EN421
High shoe in nubuck, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole. Made partly from recycled content; in lining, laces, insole. Sizes: D, 36-48 / XD, 39-48.
This Proflex back support belt in breathable Spandex (100% woven nylon) provides maximum support of the lower back and abdominal mus cles during lifting, hoisting and other strenuous tasks. Extremely supple version with patented V-shape and Sticky Finger support st rips on the inside to keep the belt perfectly in place while it is worn. Includes adjustable two-phase closure and removable, machin e washable shoulder straps. Sizes: S / M / L / XL / XXL.
