BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Dust- and liquid-proof plastic wall cabinet for storage of one Barikos bottle.
Chin piece S91C, suitable for attachment to face shield S910 (150 mm polycarbonate) / S911 (150 mm acetate) / S912 (150 mm acetate a nti-fog).
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. The micro-granule in Prosorb works over a large surface area and has a rapid, large absorption capacity. Absorption capacity: 20 kg for 10 kg.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry str ap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coup ling.
resistant to 350°C. Perfectly cut resistant so ideal for commercial kitchens, processing hot items and in all industries which present cutting and heat risks.
Hi-vis rain jacket / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Very comfortable / Supple / Very light / Taped seams / Outside: Fixed hood in collar / Zip closure under flap with press studs / 2 patched pockets / Round inset sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Inside: Fixed lining: mesh in body and polyamide in sleeves / Fabric: SIOPOR® Regular: / 100% polyester / Fabric (plain weave) with / 100% PU coating; ± 155 g / m² Colour: FC1 hi-vis orange - FY1 hi-vis yellow - FR1 hi-vis red
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Spark catcher as accessory for motor unit Versaflo. No PPE.
Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.
Jacket, Proban, 78% cotton 20% polyester 2% P140, 330 gr/m². ATPV: 37 cal/cm² (double layer), ATPV: 13.8 cal/cm² (single layer)
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 10,000 volts, operating voltage of 7,500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Anti-static absorbent wipes on 38 cm x 46 m sized roll, sheets perforated lengthwise every 23 cm. These medium-weight double-perforated pads on a roll are packaged in a box. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. Absorption capacity: 73 litres.
3M™ PELTOR™ G500 Forestry combination with Optime I earmuff and vizor 5C. A flexible and comfortable solution for face and heariong protection in forestry. Sizes: 54-62cm. Convenient for: forestry. In accordance with: EN 397/EN 166/EN 1731.
50x blue rolled standard fingertips - latex-free - powdered
Lamp for attachment to the helmet F1SF/XF by MSA. The lamp is extremely powerful and adjustable. Completely waterproof. Equipped with an ergonomic switch. The XPS helmet lamp is photoluminescent, so they can be recognized easily in the dark. Led laser spot for better penetration of smoke, fog and water. Weight with batteries: 180g.
Modern jeans trousers in 100% denim cotton (395g/m²) met CORDURA kneepockets for protection against abrasion and durability. Triple stitched seams, ruler pocket, hammer loop, double rear pocket, 2 side pockets. Available sizes: waist; 29-44", length; 30-36". Available colours: dark blue (denim).
Laces, black in polyester. Length: 150cm. No PPE.
Ballistic safety glasses with flexible, adjustable anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-fog layer (H2X).
Knitted glove with HPPE and Zirnium with black PU coating. Extremely good cut resistance. Touch screen function on top of thumb and index. Sizes: 6-12.
This apron is made of polyethylene and is recommended for use in the food industry. Available colors: Blue, green, yellow, red and white. Dimensions: 117 * 69cm.
Premium sweater with hood and 2 side pockets which can be closed with a zipper. This item also has an arm pocket that can also be closed with a zipper. The inside of this sweater provides extra comfort. Quality: 80% Combed Cotton / 20% Polyester, American Fleece, 300 g / m. Available sizes: XS-3XL. Available colors: Navy, Bordeaux, black and gray.
100% acrylic beanie soft touch with lapels. Thinsulate ™ lining. Available sizes: Universal. Available colors: Navy, black and gray.
Fleece jacket in high vis: • spacious front pockets with zip • inside pockets • thumb grip on the cuffs • YKK zipper in the front Quality: 100% polyester. Available sizes: S-4XL. Available colors: Hi-Vis yellow / black and hi-vis orange / black .. In accordance with: EN ISO 20471 class 3.
Shift work trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, Cordura® knee pockets, 1 back pocket with concealed press stud fastening, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% polyester / cotton, 2/1 twill weave, 245 gr / m². Available sizes: 44-66. Available colors: Navy / gray, black / gray, and charcoal gray. Compliant with: EN 14404.
This PCM CoolOver provides a constant cooling temperature of 21°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
Safety vest consisting of 100% polyester with a velcro closure. Available in: fluorescent yellow and fluorescent orange. Sizes: XS-5XL.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 460 mm Certified Category R/C. Arc Flash score EBT: 88 cal/cm²
Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
This Safety vest provides extra comfort for the wearer through a zipper. Please note: the size combination XS-S is certified according to EN ISO 20471: 2013, Class 1. The safety vest has a stitched striping. Quality: 100% polyester, Warp knit, 120 g / m². Available colors: Fluo Orange and Fluo yellow. Sizes: XS / S - 5XL. Conform: The Rijkswaterstaat guidelines are applied, just like the EN ISO 20471: 2013 / Class 2 standard for High Visibility.
The STRATO VENT helmet is lightweight, comfortable, and secure thanks to the CENTERFIT and FLIP&FIT systems. Its adjustable chinstrap and ventilation openings make it suitable for both work at height and on the ground. Fully modular, it can be equipped with accessories such as a headlamp or hearing protection. The high-visibility version ensures optimal visibility, both day and night.
Welding helmet shell 100-QR, without Quick Release Rail, without welding filter, without safety helmet.
The Frovik is a bomber jacket which you can wear in many situations. The fluorescent colour and segmented striping will keep you safe in any light conditions. The Siopor Excell fabric protects you against the rain and against many industrial hazards including the thermal risks of an electrical flashover. A surplus is the light weight of the fabric. The bomber jacket comes with a flame retardant fleece lining (index 3) which can also be removed. The wind is kept out by the elastic wrist bands that can be narrowed and by the standing collar to which a hood can be attached. The separately available hood can be stored in the special purpose inside pocket. Class 2 ARC protection can be obtained by combining the bomber jacket and the fleece lining.Complies with: IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034, EN ISO 20471, EN 343, EN 61482-2, EN ISO 14116 and EN 14058. Available sizes: S-3XL Available colours: Yellow-Navy, Orange-Navy
Safety glasses with orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. With foam and elastic headband. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes.
Versatile metal detectable disposable knife. Suitable for cutting single-layer cardboard, foil, and strapping tape, but also for opening adhesive tape and scraping excess substances from smooth surfaces. Can be ordered per 10 pieces.
Steel carabiner automatic closing, opening 22 mm, weight: 230 gr. Breaking force: 40kN.
Thin glove for medium arc flash protection with high cut resistance. Flame retardant neoprene coating on the palm. Sizes 7-11. Complies with: ASTM F2675 ATPV palm: 22cal/cm², backhand 5.9 cal/cm², IEC 61482-1-2 CL1 EN388:2016: 3X31D EN407: 41XXXX
13 gauge seamless knitted gloves, 100% high density polyethylene with elastane Soft grey PU coating on palm, DMF<5ppm. Touchscreen. Elasticated wrist. Sizes: 6-11 Conforms to: EN 388:2016: 4.X.4.3.C
Dispenser for use of 1000 ml and 2000 ml soft bottles.
Conical earplug made of polyurethane foam. The pressure is evenly distributed in the ear, resulting in optimal comfort. Easily detec table by standard metal detectors because they contain a tiny steel ball and are attached to a detectable cord. High visibility due to blue colour to avoid potential contamination in the food sector. Non-poisonous and hypo-allergenic. Packaged per 200 pairs. Suita ble for: agricultural and food industry.
Light yellow hearing protector for attachment to helmet, made of combination of plastic and stainless steel. Very light model with e rgonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Terylene suspension for Concept helmet with slip adjustment.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Earplugs with cord for ongoing use. SNR: 30dB.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
Helmet liner in flame retardant material. Fits between the helmet shell and the interior, for warmth without compromising on comfort. With zipper connection to the frost neck cape.
Synthetic leather glove, Winter-lined, 0,7 mm, Microthan®+, Diamond grip pattern, Polyester, Fleece, Cat. II, Black, grey, yellow, Wrist support, Chrome free, Velcro®, for allround work . EN 388:2003, 2322 EN 511:2006, 21X
High shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
Natural latex glove, good grip, lined inner, freedom of movement: excellent comfort thanks to the textile inner (seamless work surface), very high tear resistance, very good resistance to various acids and ketones. Applications: Chicken breeding, vegetable cultivation, perfume production, polyester lining, masonry work, and ink and dye production. Length: 31 to 33 cm (depending on size). Thickness: 1.15 mm. Sizes: 5-10.
Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Fitted with two standard carabiners. Serves a s connection between anchor point and harness.
Dust filter holder for attachment of dust filters 5911, 5925 and 5935 to 3M gas filters. Also for use in combination with filter hol der 603 for direct connection of dust filters 5911, 5925 and 5935 to 3M half and full face masks.
These reusable & detectable earplugs are an ideal alternative to otoplastics for personnel who are only temporarily exposed to noise or for temporary personnel who work under noisy conditions. The Comfoor Parttime includes a unique filter that filters out all the harmful noises, without completely blocking the ear. As a result, conversations and sounds from the surroundings remain audible and there is no sense of vertigo. It is made of skin-friendly, durable silicone material that easily conforms to the ear. The result is a good seal and superb wearing comfort. Thanks to the unique design and special grip, the Comfoor Parttime is easy to place in the ear and to remove. Can be optionally fitted with a cord with clothing clip. Available in: blue. (SNR 24 dB).
Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.
Enclosures for electrical plugs Extremely effective against unauthorised or negligent use of electrical equipment. Not PPE.
Lightweight (34g) and esthetic safety spectacles, with integrated side protection. Antistatic, with flexible side pieces.
1" connection
Polo, 60% modacrylic 39% cotton 1% carbon, 200gr./m², flam retardant, antistatic, long sleeve, 3 button placket. Available in: navy, black and grey.
Seamless waterproof nylon glove with thin double nitrile coating. Good dexterity, grip and elasticity because of lining. Length: 30cm. Antistatic, latex and silicone free, food approved .
Kernmantle rope with 11 mm diameter. For use in combination with rope grabs for 11 mm rope. With two loops at the ends and two fixed standard steel carabiner hooks.
Low shoe Toby S3 in black full grain leather fitted with a steel toecap and non metallic antiperforation midsole. Lining in synthetic material, insole with fleece lining. Outsole in PU/nitrile, resistant to fats and oils.
Automatic retractable cutter in the form of a pen with replaceable ceramic blades. Rubber holder Double sided ceramic knife is specially designed to stay sharper and cause fewer accidents. Remains up to 10x sharper than regular replacement blades. Replacement blades: 1025874
Low shoe in white A microfibre, with a steel 200J toecap. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer, Sanitized. Sizes: 35-48.
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
