BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Absorption granules that absorb virtually all aqueous and non-aqueous chemicals. Trivorex not only neutralises acids and bases but a lso oxidants, reductants, etc.
Handy wall box in blue made of strong ABS for storage of safety glasses. Dimensions: L23,6 x W12 x H12 cm.
Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 54x107mm. Battery life: 2500 hours.
T-shirt, 100% pre-shrunk ring spun cotton, 145 gr./m², single jersey, long sleeves, round collar. Available in: white, black, navy, red, naturel, royal blue, bottle green, ash grey, sport grey, dark grey.
T-shirt in single jersey, 145 gr./m², 100% preshrunk ringspun cotton. Comfortable design with long sleeves. Available in : white, black, navy, red, naturel, royal blue, bottle green, ash grey, sport grey, dark grey.
Curtain to guide water into 9009 drum during a shower test.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Full set ergonomic motor unit for air welding helmets with speed glass. With two dust and/or gas filters. Not for use in closed areas. Set includes a motor unit, standard Li-on battery, charger, air hose, pre-filter, dust filter and flow indicator. Equipped with visual and auditory low flow alarm. Battery life: approx. 8 hours, when used with dust filters. Flow rate: 170-200 l/min. Weight of motor unit: 1.16 kg. NPF: 50.
6 refills of Salvequick blue detectable plaster. Each refill contains 35 adhesive plasters: 21 of 72 x 19 mm and 14 of 72 x 25 mm. Suitable for Salvequick dispenser.
Dark blue high shoe S3 in full grain leather with steel toecap and steel antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39-48.
Ergonomically shaped kneeprotectors in 100% polyethylene. Very lightweight. To wear with TWO2000(1029448) or TWC2000(1029671). Dimensions: height: 22 cm, width: 17 cm. Available sizes: Universal. Available colours: Black.
Spark protector to protect filters against sparks.
Safety glasses Silium+ is a comfortable and ultra lightweight polycarbonate model for extended wear. Anti-sratch and anti-fog CSP- coating (Platinum): This innovating coating is an effective solution for all activities that alternate exposure to bright light and low light, while also being suitable for extreme hot and cold temperature environments. Resistance to surface damage by fine particles and UV- radiation.
Bermuda, 65% polyester, 35% cotton, 300g/m², multi pocket, zip closure. Available sizes: 42-64. Available colours: Navy, White, Black, khaki, dark grey. No PPE.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Vibram outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Waipoua Forestry combination with ABS helmet, earmuff and vizor. A flexible and comfortable solution for face and heariong protection in forestry. Convenient for: forestry. In accordance with: EN 397/EN 352-3/EN 1731
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. Featuring a breathable, abrasion resistant lining in textile. Sole in PU / TPU, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 35-42.
Biodegradable single use glove, powder free.
Reusable FFP Mask with a very low breathing resistance. AirWave® Pleated Filter for comfortable breathing and fatigue-free work. Longer use time, less consumption ProValve: Built-in valve, reduces condensation from exhaled air. Comfortable full-face seal made of washable TPE material which is gentle on the skin DuraMesh®: strong and durable structure, keeps the mask in shape. ActivForm®: no nose clip needed Length-adjustable loop strap with clip for quick, simple and safe on and off. Single packed, 5 pieces in box. Tested and certified to EN 149:2001+A1:2009 All Moldex products and packages are 100% free off PVC
Yellow safety boot from the Acifort range (Acid+Confort) in PVC/Nitrile rubber fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC/nitrile rubber with tread resistant against dirt. Wear resistant and confortable through the optimum grip. Sizes: 40-48, 49/50.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
The PW40 earmuff with high level attenuation designed to provide basic protection. Super economical, the over the head design provides maximum versatility for use with other PPE. SNR: 28dB In accordance with: EN 352-1
Seamless knitted glove in yellow high-viz cut resistant ATA® fibres, with double palm and finger coating in nitile Microfinish®. Excellent cutting resistance and good grip in dry, wet and oily condtions. Available in sizes 6, 7, 8, 9, 10 and 11.
This sweater with a zipper collar is particularly shape and colorfast. The inside is roughened for extra comfort. Quality: 60% cotton / 40% polyester, American fleece. Available colors: Red, royal blue, navy, anthracite, black, lime. Available sizes: XS - 7XL.
Detachable arc hood with chin protection and peak. Quality: FR PU + inherent FR knitting; ± 280 g/m² Available sizes: XS-3XL. Available colours: Navy.
Low shoe in nubuck leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in leather. Outsole in MONO-PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-49.
Flame retardant chinos with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Sizes available: 44-64, 146-156, 96-120 EU. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Low shoe in waterrepellant suede microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Exterior: Concealed button closure / Zip fly, 2 set-in pockets with flap, 2 back pockets with flap and hidden snap button closure, 1 patch thigh pocket with flap and hidden snap button closure, 1 ruler pocket with flap and hidden snap button closure, elasticated waist, knee pockets, waistband with belt loops, flame-retardant reflective tape (50 mm). Inside; identification tag. Material: Sio-Safe Essential Eco 50% cotton + 30% Tencel + 19% recycled polyester + 1% AST; +- 320 g/m. Complies with: EN 61482-2 9.7 cal/cm² ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 116111 class 1 A1 A2, EN 1149-5, EN 13034 (typ PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 48-58 S, 44-64 R, 46-56 L
Sweatband in leather. Suitable for cradles of Peltor helmets. Not separately tested as PPE.
The PROTAC amplifies all the ambient noise to a level that allows you to hear it better. It allows you to hear better and protects you during those moments when protection is necessary. Ideal for automatically blocking peak noise above 82 dB. Allows you to continue communicating normally. Settings are stored when removed. Automatic shut-down in the event of non-activity for 2 hours.
This 0.63mm thick knife is very suitable for cutting different materials. The ergonomic support in aluminium makes the knife very stable and is suitable for left and right handed ones. Very handy slider for using the knife while wearing safety gloves! Spare blades: 1024827
Easy to put on harness in body vest with 2 attachment points, on the back and on the chest. Body in fluorescent yellow polyester/cotton with striping. Adjustable chest and leg straps. Leg straps fasten with quick release fastener. Fitted with 2 Velcro fastening breast pockets and attachment points for equipment bag. Sizes: S/M and L/XL.
omfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools. Sizes: S/M - L/XL.
Kernmantle rope with 11 mm diameter. For use in combination with rope grabs for 11 mm rope. With two loops at the ends and two fixed standard steel carabiner hooks.
Earmuffs X5 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New damping pads increased damping, and 'spacers': an extra seal ring that reduces resonance. Adjusted easily using 'grip areas' on the top and bottom, durable, ergonomic and very light in relation to a noise-reduction. Can be combined with 3M respiratory and eye protection. SNR: 37dB.
Lined winter glove with fleece lining and PU palm. Safety cuff. Fully lined. Sizes 8-11.
Low black safety shoe in water resistant full grain leather. Lining in spandex and pig leather. Strong anti-slip sole in PU / Nitrile with steel leg for optimal foot support. Removable EVA insole. Sizes: 38 - 47.
Talcum powder for electro gloves. Helps when pulling on gloves and absorbs transpiration. No PPE.
Post and pedestal system to place Skipper unit (1044502/1044611), fits perfectly in any environment. The base can be filled with water or sand for extra stability and sturdiness.
Face shield in clear polycarbonate, length 230 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 8 9.
The Urbino fleece sweater protects against cold and against the thermal risks of an electric arc flashover. The sweater with upright collar and hidden zipper was provided with an elastic hem and an elastic in the sleeve ends. As an added advantage, the soft fleece fabric was treated against pilling. Quality: Double-sided fleece: 54% Protex + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Marine. Complies with: EN ISO 11612 A1.B1.C2.F1, EN 1149-5, IEC 61482-2 Class 1, EN ISO 14116 and EN 14058.
Knee pads for Tranemo work trousers with flame retardant properties. Quality: 100% EVA foam. Available colours: Gray. Complies with: EN ISO 11612 A1.
Low safety shoe in full grain leather with synthetic antiperforation sole and a steel toe cap. BOA-closing system. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Low shoe in microfiber, with a synthetic 200J toecap (amagnetic). Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-52 (widths: 10, 11, 12).
Bomber jacket Calais S503: Waterproof and breathable with taped seams; Fully lined; inner pockets; adjustable cuffs; Ideal for corporate wear and personalization multi pocket; Concealed hood. Quality: 100% polyester pongee PU coated 100g. Available sizes: XS-3XL. Available colors: Black and Navy. Complies with: EN 343 Class 3:1.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. With metatarsal protection XRD MET GUARD. Fitted with a breathable liner in textile. BOA-closing system. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Earplugs with cord for ongoing use. SNR: 30dB.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Replacement knifes for safety knife Martego. Dimensions: length: 26mm, width: 18,5mm, material thickness: 0,40mm. Package: per 10 pieces.
Parka 3 in 1, polyester peach PVC coated, 230g / m², anti-pill fleece, 260gr/m², waterproof, 2 pockets with zipper, zipper with flap, removable fleece lining. Collar can be folded in hood.
Matching detachable helmethood (hood can be worn over a helmet ) for the parka Sentai. Colour: Navy
Boot sock in wool with collar in velours. Colour: beige. Sizes: 39-47. No PPE.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore-Tex. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on both sides in leather. Specially designed BOA closing system. Sizes: 38- 48.
Burnshield spray, 125 ml bottle, has cooling effect on burns.
First aid kit with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, well organised and more accurate! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape, temperature, dust and water resistant, maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in accordance with A-guidelines + extra accessories*, Resc-Q-Assist Colour System, colour guide, wall holder*. Extra accessories: safety blanket, Burnshield burn compress and eyewash bottle. Version: in line with A-contents. Dimensions: 445x320x150mm Content also available separately (Art: 1031057)
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
