BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Top layer: towelling made of 85% viscose of bamboo and 15% of polyester, weight 230 gr/m². Bottom layer: 50% elastomer-latex and 50% cocos fibre, with a weight of 550 gr/m². The top and bottom layers are connected with a polyurethane foam density 25 kg/m³ Fresh, soft and absorbs perspiration. Sizes: 36-49.
Supple back support belt made of woven nylon, for extra support of the abdomen and lower back. Fitted with a sturdy closure and support strips to keep the belt perfectly in place. Removable, machine washable shoulder straps.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff and palm reinforcement. Attractive, highly visible look with yellow and blue stripes. Available in: yellow/blue.
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
White gloves made of heavy cotton with elastic (tricot) at the wrist. Sensitect gloves have a perfect fit, and are ergonomic and extremely comfortable due to the Interlock quality. Can be worn either as a liner glove or for product protection.
The perfect protection for sporadic and light kneeling situations. This knee pad is non-conductive, silicone-free and made of foam r ubber. Good resistance to oil-based products. Sizes: 36 cm x 53 cm x 2.5 cm. Other sizes are also available.
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. The micro-granule in Prosorb works over a large surface area and has a rapid, large absorption capacity. Absorption capacity: 20 kg for 10 kg.
Adjustable one-piece traction device for shoes or boots delivers tenacious grip and stability. Rugged steel studs for tenacious grip and stability.
Designed for SAFE collection of used blades and once completely filled final disposal. Always remember: Carelessly discarded blades represent an imminent risk of injury to one and all! Once FULL, screw the lid to the point where the red lock pin engages = the container is now SAFE for disposal. Loose packed item. Sized: 100 x 100 x 210 mm. No PPE.
Industrial headlamp Vizion I,with non-slip rubber helmet strap.Safety Yellow, ATEX. 3 beam modes: spot,diffuse and red diffuse.The red diffuse mode makes night vision possible. The Vizion is O-ring sealed for a completely watertight guarantee. Designed for gloves. Effortlessly access the power button and beam selectors with even the thickest gloves. Lamp module can be removed from its casing for use as a portable work light.
Safety knife with semi-automatic retraction for left and right-handers. Heavy zamak body with the slider on upper side for horizontal cutting. Replacement blades: 1016008.
Dust mask, class P2, for harmful dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Internal comfort pad for nose. With adjustable, elastic headbands. NPF: 10.
Low shoe Toby S3 in black full grain leather fitted with a steel toecap and non metallic antiperforation midsole. Lining in synthetic material, insole with fleece lining. Outsole in PU/nitrile, resistant to fats and oils.
Seamless glove with nitrile 3/4 coating. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Flame retardant, anti-static hi-vis rain jacket, 100% polyester fabric with 100% FR PU coating + AST; ± 250 g/m², 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Very comfortable, Supple, High tear resistance, Taped seams, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 2 patched pockets, 2 Loops for badges, Round inset sleeves, Sleeve narrowing by press studs, Back length 85 cm (L), Fixed flame retardant cotton lining, 2 Inside pockets, Zipper in back lining for placing logos.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
Safety knife with an additional slider on the back of the cutter. For work with triple-walled corrugated board boxes. MAXISAFE adapts to the type of cut required at the time, be it sideways, horizontal or straight from "up top". Designed for a minimum of effort at a maximum of efficiency. Ergonomically styled plastic handle with metal wear- protector at the blade outlet.Welcome the safest and most versatile knife mechanism in the world! For use by right- and lefthanders. "GS- TESTED FOR SAFETY". Easy blade change: no extra tools required. No PPE. Blades: 1024827
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
Sandale in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-64cm.
100 % waterproof / windproof / highly breathable / water repellent outer fabric / moisture attracting coating on the inside / very comfortable / supple Quality: 100% polyester fabric with 100% PU coating. Available colors: Hi-Viz yellow/Navy. Available sizes: S – 3XL.
3M ™ Solus ™ 2000 with In/Out PC lens and adjustable ear branches. The glasses are available with a Scotchguard coating (anti-scratch and anti-fog). Marking: 5-1.7 1 FT KN.
Low shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
High shoe in microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with wheel ratchet. Has a Chamlon sweatband.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility, brought together in a winter glove.
Haevy duty backpack in flame retardant fabric to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
Battery LI-ON, heavy duty, for Adflo motor unit. Allows approx. 8 hours of work if a combination of dust and gas filters are used on the Adflo motor unit.
Dust mask, class P3, for toxic dust. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its sh ape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfor t and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve fa ces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands with closure. NPF: 50.
Coverall, polypropylene / polyethylene with waterproof coating,elasticat wrists and ankles, elastic in the waist, zipper, hood. Available in white. Sizes: L - XXL.
Absorbent pads measuring 7.6 cm x 122 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. Ideal for the abso rption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. The great f lexibility of the socks allows them to be easily placed around machines. Absorption capacity: 45 litres.
Absorbent pads measuring 7.6 cm x 122 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. These absorb all i ndustrial liquids, including oils, water, solvents and coolants. The great flexibility of the socks allows them to be easily placed around machines. Absorption capacity: 45 litres.
Arm protector, polyethylene, thickness 20 micron, length 40cm. Package containing 100 pieces. Available in: blue. Sizes: universal size.
Face screen in blank polycarbonate, thickness: 1,5mmm, lenght 225mm. Possible combination with the Anti Electric Arc Browguard S89CAEA (1014252) or the face screen carrier S57CEAEA (1014320). Packaging: 10 pieces.
High-quality heat resistant glove in Kevlar and leather. Wool lining, cuff length 13 cm. Suitable for contact heat up to 350°C for 15 sec.
Fallline length 1.5 meters, diameter 10.5 mm. Kernmantel line, on both sides a standard carabiner hook.
ChemMax 3 PLUS with NeoSol EC27F gloves + PULL CORD.
Safety spectacle made out of PC. Has a anti-scratch coating.
Glove made of cut-resistant HDPE material with PU coating. Very finger sensitive. Sizes: 6-11.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
High shoe in water resistant black full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textil. Outsole in Vibram Nitril, SRC antislip, oil and carburant resistant. Also resistant to contact heat up to 300°C. 100% metal free. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Flame retardant and antistatic t-shirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). V-neck, long sleeves, stitched seams, length back: 69 cm. Very soft and good moisture regulating properties. Available sizes: S- 3XL. Available colours: navy, grey.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Has different diopters (+1,5/+2/+2,5). This glasses have very good colour recognition, a large field of view and brings resistance to UV-rays.
Sandal in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Waistpants with many of functional pockets. Red-35, sky blue-53 and forest green-66 have got contrasts in black. C42-C64, by unpicking the red stitching at the hem the trousers can be lengthened by 5 cm. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C32-C50.
Safety glasses with clear polycarbonate lens fitted with an anti-fog and scratch resistant coating. Soft material around the earbranches for reducing the pressure.
Constructed using premium HiVisTex Pro tape, this Cotton Comfort t-shirt offers excellent freedom of movement due to its segmented tape design. Lightweight, stylish and breathable. Quality: 55% cotton / 45% polyester. Available sizes: XS-4XL. Available colours: Fluo yellow/black, fluo yellow/navy, fluo orange/black and fluo orange/navy.
Inherently flame retardant metal-free switch jacket with Velcro closure at the front for quick doffing. PPE category 4 (>40 cal/cm²). The jacket has fluorescent shoulder pads for extra visibility and is made of supple, wind and water resistant softshell material. Velcro closure at the front. Adjustable cuffs. Quality: Windtech FR 550, 550 g/m², wind and water resistant. Available sizes: S-L-2XL-4XL. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612: A1+A2 B2 C2 F2, IEC 61482-2: CL.2, EN 1149-5 and EN 13034: type PB[6].
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.
Seamless lightweight, 100% waterproof and windproof glove that is very finger-sensitive and gives you maximum dexterity. Laminated membrane technology for great protection against rain and moderate cold. This glove is characterised by its 3-layer construction with lamination technology, perfect and tight fit, very durable knitted nylon outer layer, fitted with waterproof PU membrane, ultra-thin and breathable ,Merino wool lining with moisture wicking anti-bacterial action and silicone MoG print on the fingers and palm for good grip. Sizes: S (7/8) - M (8/9) - L (9/10) - XL (10/11).
Electro gloves MUST be stored out of sunlight and must NOT be folded. Due to the dimensions (250x500x100 mm) this case can be used for Class 0 upto Class 4 gloves, even in length 41 cm. New design with transparent cover (with UV filtration), can be fixed to a wall as well as transported by hand because of the retractable handle. Comes with a 100ml Luzenac talc container. The talc is recommended to increase comfort in use of insulating rubber gloves, it also makes them easier to done and doff.No PPE.
Cut resistant glove made of HPPE and a black, abrasion resistant nitrile foam coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A light weight glove, high dexterity, touchscreen compatibility and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.3.4.2.C, EN407:2020:X.1.X.X.X.
Flame retardant chinos with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Sizes available: 44-64, 146-156, 96-120 EU. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Practical plastic hearing protector with 3 wearing positions (over the head, behind the head, under the chin) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Sporty goggles, derived from the successful Uvex ski goggles. Successor to the Ultravision 9301 PC. Very comfortable, good protective coverage thanks to the DCT technology. Glasses with limited ventilation. Frame colour: green/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Dust mask, class P3, for toxic dust. Form-retaining mask thanks to Dura- Mesh shell on the outside of the mask. Mask always retains itsshape,even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels ofCO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. The pleated filter technology reduces breathing resistance to 50%. Non reusable. Fitted with adjustable, elastic headbands with closure. packed per piece. NPF: 50.
Signa T-shirt Bird Eye Knit, 100% polyester, rond collar, weight 150 g/m².
Compresses for very rapid first aid for burns in the acute burning phase. 10 x 10 cm. Three year shelf life.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with ha lf and full face masks with standard threads.
AB2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0. 5 %.
ABE1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic and inorganic gases and vapors with boiling point >65°C and sulfur dioxide. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Comfort facial seal as spare spart of hoods M-106, M-107,M-206, M-207, M-306, M-307. No PPE.
Disposable knife/scraper, steady and functional. Suitable for the cutting of carton, paper and foil up to 6mm.
Flame retardant, anti-static hi-vis rain jacket, SIOPOR® Excell: 3-layer fabric: Dobby Ripstop Polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 270 g/m², High performance lightweigth fabric, 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Comfortable, Supple, High tear resistance, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch <(>&<)> close fastening, Back length 85 cm (L), Unlined, 2 inside pockets.
Low shoe S3 in black / brown full grain leather with a 200J synthetic toecap and plastic anti-perforation sole. Lining in synthetic breathable 3D material. Comfortable insole in coolmax. Sole in PU / TPU. Sizes: 37-47.
Seperate swing pockets in 100% Cordura with different storage-and hook up possibilities. Reflection piping, very easily attachable. Dimensions: height: 23,5 cm, width: 17 cm. Available sizes: universal. Available colours: Black, Navy
Extra high ranger boot for foundries in full grain leather with 200J steel toecap and anti perforation sole in steel scuffcap in PU. Closure: laces + zip. Fitted with a leather liner, padded tongue and interior insole made out of leather. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/Nitril with heel, longwearing, with very good slip resistance SRC and oil, fat and acid resistant. Laces: 1035603. Sizes: 39-49.
