BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Effective skin protection against water-soluble substances. Stokoderm Aqua stabilises and regenerates the skin barrier and prevents softening of the skin during damp work and inside gloves and protective clothing. Also an absolute must for frequent contact with water-based substances: water-based oils and cooling lubricants/ water-based solutions of dyes, acids, alkaline solutions, salts, cleaning agents and disinfectants/ cement, lime and fertilizers. Stoko Protect+ tube 100 ml. Protection against water-soluble substances. PPE category: not applicable.
Bag for half and full-face Moldex mask. Dimensions: L x W x H 25x11x30.
Yellow sturdy, anti-static safety boot in PVC with steel toecap and antiperforation sole. Provided with forefoot reinforcement, metatarsal protection, ankle protection and anti-slip outsole. Very suitable for working with high pressure cleaners (up to 800 bar). Sizes: 39-48.
Trousers, Guardian H²O, flame retardant, antistatic, water and wind proof, elastic in waist, side pockets, reflective bands.
High shoe in black waterproof nubuck leather, with a steel anti-perforation sole and a steel 200J toecap. With a breathable, abrasion resistant Gore-tex membrane. Sole in Vibram PU / Nitrile, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 6.5-12 (UK) / 40-47.
Flame retardant fleece lining with sleeves, Double sided fleece: 100% flame retardant polyester; ± 275 g/m², Soft fleece material, Good cold protection, Breathable, Anti-pilling treatment, Can't be worn seperately, Stitched seams, Zip closure, Slitopening to inside pocket of rainjacket, Round inset sleeves, Knitted windcuffs at end of sleeves, Back length 75 cm (L)
Laces, black in polyester. Length: 100cm. No PPE.
Flame retardant hivis rain trousers in PU quality.
Comfortable and breathable trousers with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Flame retardant comfortable sweater with round neck and Hi-Vis accents on the sleeves. 20% recycled cotton. Knitted neck, cuffs and hem. With heat seal reflection. Entirely metal-free. Quality: Cantex Terry, 290 g / m². Available sizes: XXS-4XL. Available color: Fluo yellow / navy. Compliant with: EN ISO 11612: A1+A2 B1 C2 F2, IEC 61482-2: CL.1, EN 1149-5, ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
High shoe Run in water repellent split suede with Geox side transpiration system (Net Breathing System). Equipped with an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable nylon and breathable insole. Sole in PU/PU. Sizes: 35-48.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 1mm, Lenght: 280mm Certified for resis tance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C) Class 00 Yellow offers arc flash protection Class 1 in accordance with the EN 61482-1-2²
Low shoe in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/PU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Seamless lightweight, 100% waterproof and windproof glove that is very finger-sensitive and gives you maximum dexterity. Laminated membrane technology for great protection against rain and moderate cold. This glove is characterised by its 3-layer construction with lamination technology, perfect and tight fit, very durable knitted nylon outer layer, fitted with waterproof PU membrane, ultra-thin and breathable ,Merino wool lining with moisture wicking anti-bacterial action and silicone MoG print on the fingers and palm for good grip. Sizes: S (7/8) - M (8/9) - L (9/10) - XL (10/11).
Flame retardant chinos with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Sizes available: 44-64, 146-156, 96-120 EU. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Anti-static absorbent pads measuring 41 cm x 51 cm. These medium-weight perforated pads are packaged in a box. Packaged per 100 piec es. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of chemicals, acids and bases or universal absor ption. The green colour identifies these wipes as chemical waste. Absorption capacity: 88 litres.
Safety knive for left- and righthanded. Body in aluminium and plastic. Metal detectable for food industry. Depth blade: 24mm. No PPE. Blades: 1016574
The Stability Pro insole gives extra pronation and extra support to the inside of the foot. It provides optimal support to the heel and middle foot. Absorbs excessive perspiration moisture and promotes optimal fit due to lateral support for the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is also thermodynamic. Excess heat is removed, preventing blistering.
Superlight welding overspectacles with panoramic side protection and a perfect, pressure-free fit. Temple length is size adjustable. Frame in black/green synthetic material. Fitted with a grey polycarbonate lens: welding lenses are protection from harmfull UV and IR radiation. With Infradur coating: High-tech coating, scratch resistant on both sides, fog-free on the inside and minimise damage from welding sparks.
Sturdy gloves in 100% nitrile with rolled edging. Fully powder free. Antistatic and silicone free. Food approved. Length 40 cm, thickness 0.12 mm. Sizes: 5.5 - 6 / 6.5 - 7 / 7.5 - 8 / 8.5 - 9 / 9.5 - 10 / 10.5 - 11.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Has different diopters (+1,5/+2/+2,5). This glasses have very good colour recognition, a large field of view and brings resistance to UV-rays.
100 % waterproof / windproof / highly breathable / water repellent outer fabric / moisture attracting coating on the inside / very comfortable / supple Quality: 100% polyester fabric with 100% PU coating. Available colors: Hi-Viz yellow/Navy. Available sizes: S – 3XL.
Havep Multi Shield multinorm work trousers model 80308
Kneepads in EVA Foam. Quality: 100% EVA, Ethylen Vinyl Acetat. Dimensions: 16 x 21CM.
· Seamless and multifunctional tubular made with Thermolite®, an excellent insulating fabric composed of hollow-core fibres. · It enhances comfort in cold temperatures by wicking moisture away. · Ideal product for wearing all year round, offering a higher protection against cold and variable weather, specially for moderate cold weather thanks to its Thermolite® fabric. · Breathable fabric. · Maintain body temperature. · Some designs incorporate two 3M ScotchliteTM retro-reflective stripes for enhanced visibility in poor light conditions. · Polygiene® treatment, that allows the fabric to remain cleaner for longer avoiding bacterial growth and stops odors.
Inherently flame retardant metal-free switch jacket with Velcro closure at the front for quick doffing. PPE category 4 (>40 cal/cm²). The jacket has fluorescent shoulder pads for extra visibility and is made of supple, wind and water resistant softshell material. Velcro closure at the front. Adjustable cuffs. Quality: Windtech FR 550, 550 g/m², wind and water resistant. Available sizes: S-L-2XL-4XL. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612: A1+A2 B2 C2 F2, IEC 61482-2: CL.2, EN 1149-5 and EN 13034: type PB[6].
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
High shoe in microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Cut resistant arm guard, with unique design so that the sleeve stays in place at hand level and does not curl up. With extra elastic at the wrist. In 13 gauge HXFIBR fiber mixed with polyester and ealstan for a good fit. Suitable for use with food. ESD approved according to EN16350. Available in sizes M-XL.
Black boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
These foam rubber earplugs are fitted with a cord and a non-ferrous metal component. This model is 100% detectable and is highly visible thanks to its blue/orange colour. The foam conforms perfectly to the wearer's ear canal. These earplugs are primarily recommended for the food industry. industrial applications.
Electro gloves MUST be stored out of sunlight and must NOT be folded. Due to the dimensions (250x500x100 mm) this case can be used for Class 0 upto Class 4 gloves, even in length 41 cm. New design with transparent cover (with UV filtration), can be fixed to a wall as well as transported by hand because of the retractable handle. Comes with a 100ml Luzenac talc container. The talc is recommended to increase comfort in use of insulating rubber gloves, it also makes them easier to done and doff.No PPE.
Screen carrier S54CE Centurion for attachment to Centurion face shields and safety helmets. This screen carrier includes CONNECT & 3 0 mm ADAPTER for immediate attachment to Centurion helmet. Also suitable for addition of Centurion hearing protection (HELMET HEARIN G PROTECTION BALTIC SNR25 & HELMET HEARING PROTECTION SNR30).
Eye-volution – from a technical point of view probably the most complete Uvex glasses. Temples, front and nose bridge made of DCT: hard on the outside, comfortably soft on the inside. Temples easily adjustable in length and inclination. Replaceable lens. Fitted with clear polycarbonate lenses that provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the polycarbonate. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean. EN166/170 2-1.2.
Double lanyard, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Double Lanyard to allow continuous protection, even when switching between two anchor points. Fitted with one standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
A2 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 2: up to max concentration of 0.5%. processes with chemical risks.
Knee pads for Dapro work trousers. Dimensions: Length of 24 cm and a width of 16.8 cm.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate grey lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision coating. Frame: black/white.
Synthetic leather glove, Winter-lined, 0,7 mm, Synthetic leather, Polyester, Fleece, Cat. II, Black, green, Chrome free, Waterproof, Winter-lined, Velcro®, for precision work. EN 388:2003, 1121 EN 511:2006, 11X
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Short peak (50mm). With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-64cm.
Low safety shoe in full grain leather with synthetic antiperforation sole and a steel toe cap. BOA-closing system. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Flame retardant and antistatic long sleeve t-shirt in 60% modacrylic l/ 38% Lyocell / 2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Black safety boot in PVC, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
• 18 gauge gray Kyorene® Pro graphene liner • Black HCT®-Nitrile Nanofoam coating on the palm •Reinforced thumb hole • Touch screen • No stainless steel or fiberglass • Ergonomically shaped for a superior fit • Bacteriostatic kills harmful bacteria • Heat regulation keeps hands comfortable • Odor neutralization so that the gloves stay smelling fresh Conforms to: EN388:2016:4X42D
Waistpants with many of functional pockets. Red-35, sky blue-53 and forest green-66 have got contrasts in black. C42-C64, by unpicking the red stitching at the hem the trousers can be lengthened by 5 cm. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C32-C50.
High shoe in waterresistant full grain leather with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in GoreTex. Sole in PU/Nitril. Sizes: 39-48.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 254mm.
Pair of conically shaped earplugs, made of skin friendly memory foam, for protection against general noise. Fitted with neck cord an d sold in sets of 100 individually bagged pairs. Sizes: S and L. In line with EN 352-2 (SNR 33).
Knee protector, 100% polyethyleen, felt, height: 255mm, Width: 220mm.
Low shoe Till Low ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 36-48.
Goat leather welding glove, unlined. Good finger sensitivity. Split leather cuff with Kevlar seams. Length 31 cm. Sizes: 7-11.
Long john in 80% merino wool/20% polyamid (200g/m²). 1x1 rib knit fabric, very good thermal protection and breathability, lengthwise seams for a comfortable feeling, elastic band in waist. Available sizes: S- XXL. Available colours: black. No PPE.
This sweater with a zipper collar is particularly shape and colorfast. The inside is roughened for extra comfort. Quality: 60% cotton / 40% polyester, American fleece. Available colors: Red, royal blue, navy, anthracite, black, lime. Available sizes: XS - 7XL.
This cream protects the skin against all oil-based, non-water-soluble substances and organic solvents (oil, grease, paint, graphite, metal dust, soot, etc.). Easier to wash hands, while the dry hands still retain a good grip. Protection against non-water-soluble s ubstances. Content: 100 ml tube.
Low-cut safety shoe S2 made of nubuck leather, with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: D (35-48), XD (37-48).
Trilite disposable glove (latex, neoprene, nitrile) with chlorinated inner and outer, and roughened fingertips. Length: 25.5 cm. Thickness: 0.15mm. Sizes: 6-9.
Welding glasses with yellow synthetic frame, with elastic headband for a perfect fit. Fitted with a flip up part and lens with green welding shade.
Designed for SAFE collection of used blades and once completely filled final disposal. Always remember: Carelessly discarded blades represent an imminent risk of injury to one and all! Once FULL, screw the lid to the point where the red lock pin engages = the container is now SAFE for disposal. Loose packed item. Sized: 100 x 100 x 210 mm. No PPE.
Coverall, 2-piece hood, external yellow stitched in seams, elasticated waist, cuffs, ankles and hood, nylon zipper. Category III, Type 5/6
P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.
