BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Coverall, Tyvek, breathable, resistant to water-based chemicals, back side made of breathable material, antistatic, does not pill, elastichood, elastic at ankles and wrists, Tyvek zip closure with flap.Available in: white.
Flame retardant anti-static long sleeve sweatshirt, modaflame knit, 300 gr/m².
Composite gloves with dielectric properties coated with natural latex, with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 2: operating voltage 17,000V, test voltage 20,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Sizes: 8-11. In line with EN 60903.
High shoe Toby S3 ESD HI in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 39-48.
The Stability Pro Plus insole gives extra pronation, extra support on the inside of the foot and has a central footrest (for dropped front foot). This insole gives optimal support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to lateral support to the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is thermodynamic, eliminating excess heat and preventing blistering.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Bermuda, 65% polyester, 35% cotton, 300g/m², multi pocket, zip closure. Available sizes: 42-64. Available colours: Navy, White, Black, khaki, dark grey. No PPE.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
J-Energy series. Low shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, pol yurethane insole with textile layer. Sizes: 35-48.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 2500 volts, operating voltage of 500 volts. Length 36 cm, Sizes: 6-12.
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is not required. The chinstrap incorporates a quick release buckle. Removable harness also fits all other Centurion helmets. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Care cream for hands and face. Time-tested qualities for heavily- stressed skin. Tube of 100ml.
Chemical resistant glove, blue colour, thickness 0.45 mm, length 30 cm. Made of flocked natural rubber, 100% latex. Suitable for automotive assembly, light assembly, chemical industry, refineries, pharmaceutical industry, cleaning and maintenance. Sizes: 6,5/7-9,5-10.
Extra strong oil absorbing cloths. The perfect solution when durability or tear-resistance is required. Dimensions: 41cm x 51cm. Absorption capacity: 136 litres per 200 cloths.
Low shoe S2 in water repellent microfiber (partially Fashmo, partially Cordura) with 200J synthetic toe cap. Lining in breathable fabric. Outsole in TPU/PU with SRC and ESD certification. Removable black insole with ESD caracteristics. This shoe is 100% non-metallic and does not contain any leather. Sizes: 35-47.
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The silicone-free PU coating does not hinder processing of painted metal parts. The grey coating camouflages dirt when working in polluted environments.
Low shoe for women in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Dark green disposable gloves in nitrile. The profile guarantees excellent grip in dry or humid conditions. Un-powdered. Weight (size M): 6,0 g / Thickness: 0.12.-0,17mm). Applications: Light chemical applications in labs, assembly, product control, food sector. Tested for food contact (10/2011). Available sizes: S-XL.
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Flame retardant, anti-static hi-vis bodywarmer / Windproof / Breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Very comfortable / Supple / Good cold protection / / Stitched seams / Can be zipped into different jackets / Outside: Straight collar / Zip closure / 2 Patched pockets / Elastic drawstring in hem / Back length 75 cm (L) / Inside: Fixed quilted Flame retardant cotton lining / 1 / Inside pocket / Fabric: SIOPOR® FR AST: / 100% polyester / Fabric with / 100% FR PU coating + AST; ± 250 g / m² Colour: 278 hi-vis yellow / navy - 279 hi-vis orange / navy
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
Replacement knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 45/46.
Low shoe in waterresistant black nubuck leather, with an synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Heating kit that provides heat for 10 hours after packaging is broken. To be used in combination with helmet caps; These warmers can also be used in gloves.
Blue safety glasses, polyamide frame and polycarbonate lenses. Universal size. Suitable for protection against impact.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >6 5 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with sta ndard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 1: operating voltage 7,500V, test voltage 10,000V, special properties R (acids, oil, ozone) and C (low temperatures). Length 41 cm. Supplied with 1 pair of over-gloves.
Bodywarmer ripstop, 100% polyester with PVC coating, waterproof, inside: 100% polyester wadding 180 g / m², retro reflective accent, zip with press studs, straight collar, microfleece lined 280 g / m².
Innovative hi-vis pants with multifunctional holster pockets, knee pockets with opening at the top and a multi-layered thigh pocket for, for example, a telephone, keys or tools. Reinforced Oxford cloth in places where clothing wears first and triple-stitched seams for maximum durability. Quality: 65% polyester / 35% cotton. Available sizes: 28"-48". Available colors: Fluo yellow / navy, fluo orange / navy, fluo yellow / black and fluo orange / black. Complies with: EN ISO 20471 class 2.
High shoe in black microfiber/textile. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/rubber. Sizes: 35-51
Chemical resistant glove with multiple barriers. Innovative multi-layer polymer design with nitrile-neoprene-nitrile layers. Provides protection against a variety of chemicals from acids to bases to hydrocarbons and organic solvents. Featuring the latest Michrochem chemical barrier technology for superior protection in hazardous conditions. Inside of soft nylon lining for comfort and extra mechanical protection. Oeko-Tex standard 100- approved. Permeation time> 30 minutes for 13 of the 18 chemicals listed in EN ISO 374: 2016. Antistatic, latex and silicone free. Length: 35 cm, thickness 0.38 mm. Sizes: 6-11. Conforms: EN388: 2016 3.1.2.1.A, EN407: X.1.X.X.X.X, EN ISO 374-1: 2016 Type A: ACFGJKLMNOPST, EN ISO 374-5:2016
Very thin and light glove, 15 gauge. The INTERCEPT™ yarn provides high cut protection while providing dexterity and comfort. The nitrile palm coating design improves grip, extends glove life in abrasive conditions and allows the hand to breathe. The glove is silicone free which prevents the transfer of silicone contaminants to metal parts prior to painting. The Oeko-Tex certification guarantees that the glove does not contain any harmful substances such as DMF and other chemicals.Fiber glass free, latex free, antisttic, food approved and machine washable at40°C. Sizes: 5-12.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating ensures for a good grip. 13 gg liner and extra reinforcement along the thumb and index finger. Very high level of cut protection, approved for contact heat up to 100°C (15sec). Approved for ESD environments and food safe for all types of food. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
Natural latex glove, smooth exterior, lined interior Motion freedom: excellent comfort thanks to lining (no irritating seams). Very high abrasion resistance and good resistance to various acids and ketones. Applications: treatment of frozen foods, vegetable growing, chicken breeding, perfume production, polyester lining, masonry work, inks and dyes production. Length: 31 to 33 cm (depending on size) Thickness: 1.15 mm. Sizes: 5-10.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Works immediately after application: it normalizes perspiration and provides a fresh effect on the feet. The antiperspirant effect also limits irritation caused by excess sweat. The spray is very suitable for treating socks and shoes. Protects the leather parts of the shoe. Contains: flacon 100ml.
Safety helmet made of ABS. With 4-points suspension 'Fas-trac' in textile (52-64cm), with a wheel and highly absorbent PVC sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange, gray, black. Weight: 400g.
Safety helmet made of ABS, fitted with a 4-point textile suspension with wheel adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
Safety glasses with grey frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti- scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and in hibits vapour formation by more than 2 minutes. Not supplied with glasses cord.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
Flame retardant work trousers with a thin lining, so that it complies with IEC 61482-2 class 2 arc. Back pockets with flap. Cargo bag with flap, telephone pocket and concealed key ring. Ruler bag. Pre-shaped knees with height-adjustable knee pockets on the inside. Entirely metal-free. Reflection on the pipes. Item is produced to order. Quality: Tera TX, 260 g / m², Available colors: Fluo yellow / navy. Available sizes: 44-46, 146-156, 24-30. Conform: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.2, EN 1149-5, * EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB [6], ARC RATING: 20.2 cal / cm².
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. BOA closing system. TPU-scuffcap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Compact, rechargeable, durable, and waterproof headlamp, with lighting designed for proximity vision and movement. 450 lumens
AlphaTec® 02-100 laminated safety gloves have a five-layer design with hypo-allergenic lining. Can also be used as liner gloves. Extremely supple and ergonomically formed model based on patented seam technology. Offers protection against an exceptionally wide range of chemical products and solvents.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colou r: black.
Replacement hood for hood S-757.
Blue microporous cryogenic SAFEGRIP glove lined with wool. Guard of 15cm in leather. Equipped with a Velcro closure at cuff. Thickness: 1mm. Length: 40cm.
Safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Blades: 1016658
The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.
Beige/brown low shoe S3 in full grain leather with steel toecap and synthetic antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.
This high-quality welding jacket is made of split cowhide and stitched with para-aramid thread. It provides enhanced protection to the hull during welding and is designed to last in the toughest conditions. Features: CE certified. Class 2 welding protection. Concealed easy to open closure. Velcro adjustable cuffs for snug fit. Designed to be worn under harsh conditions . In line with : EN ISO 11611 Class 2 (A1)
Durable glove made from 90% recycled nylon fiber (15 gauge) with a nitrile foam coating on the palm. Touch screen compatible. The ZONZ™ patented knitting technique provides improved and comfortable hand movement. Less packaging material by omitting plastic in the inner packaging. The FORTIX™ technology ensures that the glove is 20% more abrasion resistant, and can therefore be used longer in applications where a lot of abrasion resistance is required. Latex, silicone and DMF free. Suitable for use in the food industry. Sizes: 5-12. Complies with: EN388:2016: 4.1.3.1.A, EN407: X.1.X.X.X.X.
Washable, reusable and detectable pre-formed earplugs made of softsynthetic material, with 3-rib design. These earplugs have a comfortablefit and offer excellent protection against universal noise. These earplugs are detectable by means of a tiny steel ball embedded in the front of the earplug. Ear protection with a sophisticated design that is primarily useful in the food industry. Packaged per 50 pairs.
Terylene suspension with ratchet & Drytec sweatband, suitable for Centurion Concept, Spectrum, Vision Plus and Nexus Core.
Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.
The HAZMAX S5 HRO ESD boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 35 - 50.
Semi-automatic safety knife Secunorm 380, suitable for right-handed/left-handed use and equipped with 110mm long blade with cutting depth max. 100mm. Suitable for use on thick surfaces with very high resistance. For example, thick PU foam. Replacement blades: 104 4289.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Softshell in 94% polyester/6% spandex with breathable PU membrane. STretch fabric for better wearing comfort, windproof and water repellent, laminated zippers, reflective piping, 4 front pockets, interiour pocket for phone or mp3, ID-badge, adjustable waist by pulling cord. Adjustable cuffs with velcro, beard cap. Available sizes: XS-7XL. Available colours: black, navy, dark grey. No PPE.
Flame retardant and antistatic long sleeve t-shirt in Cantex Jersey AT (59% modacrylic/39% cotton/2% antistatic) (190g/m²). Round neck, ribbed cuffs, heat sealed segmented reflection striping. High visibility yellow accents on shoulders for better visibility. Available sizes: XS-4XL. Available colours: navy/hi-vis yellow.
Multi-risk trousers with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, elastic at waist. Quality: 79% / 20% / 1% Cat / Poly / AS. Available sizes: 44-66, 24-29, 47-57 HAV. Available colors: Blue / gray. Conform: EN 1149-5, EN 11611 class 1 A1 (front class 2), EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-63 cm) and highly absorbent hydro-flock sw eatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Colours: white, yellow, blue, red, green, orange.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 250 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: yellow/black.
Chain mail glove made of 100% stainless steel. Adjustable closure around the wrist, also 100% stainless steel. Chain mail offers maximum protection against cutting risks. The glove is ambidextrous. A coloured identification tag on the wrist band indicates the size. Sizes: XXS (brown) / XS (green) / S (white) / M (red) / L (blue) / XL (yellow).
Cobra hybrid safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below, and has an anti-slip temple and branches. Ventilated. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti-fog coating. Protective bag included.
Lined working glove in synthetic leather. With open cuff, very thin. Sizes 7-11.
