BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.
Long winter cap (shoulder length) in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides. Flame-retardant properties.
Helmet attachment system made of plastic, for use with all Fitt All Elect visors. Entirely metal-free, for use in electrical installations.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
A1BE2K1/CO/NO/HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, toxic dust, vap our and smoke particles, nitrous gases and (to a limited extent) carbon monoxide. Only for use with full face masks with standard th reads. BE filter of class 2: for max. concentration of 0.5 %. AK filter of class 1: for max. concentration of 0.1%.
PVC/nitrile gloves with cotton lining for very good sweat absorption. These Fortex Pro gloves provide excellent resistance to chemicals, high tactility and a very good grip thanks to the roughened palm. Length: 35 cm.
T-shirt, 100% pre-shrunk ring spun cotton, 145 gr./m², single jersey, short sleeves, round collar. Available in: white, black, navy, red, natural, sand, beer brown, yellow, gold, apricots, orange, fuchsia, purple, burgundy, deep red, sky blue, azure, turquoise, atoll, royal blue, blue jeans, light blue navy , kelly green, bottle green, khaki, gray ash, sport gray, dark gray, real turquoise, used yellow, used raspberry, used violet, used wasabi, mint green, pistachio.
Robust glove with a thin lining in PVC type 690: Long sleeve model (60 cm), thermally attached with elastic end, made with an air vent. Suitable for immersion, disinfection, cleaning of sewers, deep sea fishing.
Black safety/fire fightingboot in nitril rubber with 200J non-metallic toe cap and synthetic anti-perforation sole(Sizes 36 and 37/38 toe cap and synthetic anti-perforation sole in metal). Outsole in nitrile. This boot offers an excellent protection against heat with emission of chemicals and contact with flames.
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. With breat hable, abrasion resistant lining in BIOACTIVE textile. Sole in PU/Vibram, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Scuffcap resistant against abrasion. Sizes: 37-47.
Composite rescue stick, used to rescue a victim (in the event of electrocution, blinding, etc.) during work on posts of the 1st, 2nd and 3rd categories. Allows the victim to be brought to safety by securing him at the waist. Length 1470mm. Weight 1.4 kg. Voltage 45 kV.
Low shoe S2 in water repellent microfiber (partially Fashmo, partially Cordura) with 200J synthetic toe cap. Lining in breathable fabric. Outsole in TPU/PU with SRC and ESD certification. Removable black insole with ESD caracteristics. This shoe is 100% non-metallic and does not contain any leather. Sizes: 35-47.
Fall-stop device 2 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Sandale in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49.
Helmet hearing protector Sana 25for safety helmet CENTURION.
Fire-resistent facial seal as spare spart of hoods M-series.
Stretchy glove, seamlessly knitted with blue Dacron fibres.
Fall-protection harness with 2 attachment points: on the back and on the chest. Full D check anchor point. Leg and shoulder bands are easily adjustable. Chest and leg straps have quick-release buckles. Built-in drop indicator. Certified to use in combination with the life jackets Secumar Alpha and Golf.
High shoe in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.
Standard work sock. Composition: 75% Cotton, 22% Polyester, 3% Elastane Sizes: 39/42, 43/46, 46/48.
Low shoe in waterrepellent black recycled microfiber (40% recycled polyamide), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
Glove made from renewable raw materials: natural bamboo fibres, with flexible coating that ensures high sensitivity, comfort and effective grip. This glove adapts exactly to each individual shape of the hand after 3 to 5 minutes. Exceeds REACH regulations. CO² neutral production in Germany, short supply chain.
Warm navy fleece with a 100% polyester mesh lining and a reflective horizontal band around the body and the arms. Two bags with zipp er and a breast pocket. Suitable to wear in conjunction with the Parka Iona S433. Available in sizes S-XXL.
Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso.
The Stability insole (sizes D and XD) provides optimum support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to the lateral foot support. Top layer consists of antibacterial X-Static silver fibre and controls moisture and heat. Excess heat is removed and prevents blistering. Sizes: 39 - 48.
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Reduced peak. W ith woven ventilation opening along the side. Size: 54-62cm.
Instant cold pack for single use.
Replacement blades of 0.30mm for secutiry knife Secumax 350
Glove with PE and Zirnium with PU coating and reinforcement in split leather on palm, index finger and thumb. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 7 / 8 / 9 / 10 / 11.
Low shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Classic fitover glasses with unlimited field of vision. Soft temples (DCT). Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material.
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Lightweight and very comfortable face shield, 450 x 200 mm. With individually adjustable headband and forehead protection. Cellulose acetate visor: scratch and chemical resistant, but is not suitable for use at high temperatures or as protection against high impact.
Thin work glove with a microporous nitrile foam coated palm. This ensures a very good dry grip and protects against moisture. Oeko-Tex approved. Resistant to contact heat up to 250°C (for 15s). Sizes 5-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.2.X.X.X.X
Laces, black in polyester. Length: 125cm. No PPE.
Safety glasses in clear polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (40g). Foreseen of a an adjustable nose bridge and Geco-injected temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging. Fits over most prescription glasses.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Ultra thin insulating gloves for electricians made of 100% natural rubber latex. Length 280mm. Arc Flash classe: APC1. REACH compliant.
High shoe in black water repellent full grain leather, with a warm fleece lining. Fitted with a steel perforation sole and 200J toecap. The toecap has an extra protection layer. Antistatic insole with moisture control system for a comfortable feeling. Equipped with a shock absorbing insole from Uvex 3D Hydroflex. Outsole in PU 2 densities, specially shaped for better slip resistance. Sizes: 38-50.
Coverall flame retardant and antistatic, 80% cotton 19% polyester 1% anti-static yarn, satin binding, 280gr./m², 2 chestpockets with flap, 2 patched side pockets, 1 meterpocket with flap, 1 back pocket with flap, elasticated back waist, hidden closure, retro-reflective bands. Available in: navy, orange, red, charcoal and black.
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
High shoe in black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch and anti-fog coating. Marking: 2C-1.2 1 FT KN.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. BOA-closing system. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Apron, Tyvek, antistatic, with chestpiece, two cords on the back to fasten, length 108 cm. Available color: white. Sizes: universal size.
Seamless knitted cotton, No PPE 400gr/12pair
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling poin t >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. S uitable for: processes involving chemical risks. Weight: 370g.
Electric insulating boot with epoxy coated steel 200J toecap. Foreseen with a rubber vulcanised outsole (fuel and oil resistant), antislip and tested against 35 KV, energy absorbing heel. Every boot is tested to 25 KV before leaving the factory. This boot is 100% waterresistant and adjustable in height. Easy to pull out through the 'hands free removal'. Needs to be retested every year. Resitance to hot contact 60 seconds 300°C. Liner in polyester, washable insole. Sizes: 35(uk3)/50(uk15).
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for better comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surface. Sizes: universal size.
Martor replacement blades 5232. Packed per 10 pièces. No PPE.
High shoe Toby S3 ESD HI in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 39-48.
ABEK2 gasfilter in plastic housing for Moldex masks series 7000 and9000. Protects against inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 2 gas filter: for max. concentration of 0.5%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Work trousers in easycare material that ensures good retention of shape and color. The pants have two back pockets with flap and velcro closure, ruler pocket with knife button, adjustable knee pockets on the inside (two heights), reinforcement on the ruler pocket and knee pockets. The sizes C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton. Available colors: red, sky blue, navy, green, khaki, gray and black. Available sizes: C42-C64 (extendable to C142-164), D84-D120.
Two-color polo sweater with particularly durable shape and color fastness. Quality: 60% cotton / 40% polyester, 280 g / m². Available sizes: XS-7XL. Available colors: navy / royal blue, black / gray, black / red, black / orange and black / lime.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Overshoes, CPE, heavy version (90 micron, one size. Available in: blue. Package containing 50 pieces. No PPE.
Super-light safety helmet with micro peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Chemical resistant glove, blue colour, thickness 0.45 mm, length 30 cm. Made of flocked natural rubber, 100% latex. Suitable for automotive assembly, light assembly, chemical industry, refineries, pharmaceutical industry, cleaning and maintenance. Sizes: 6,5/7-9,5-10.
The Stability Pro Plus insole gives extra pronation, extra support on the inside of the foot and has a central footrest (for dropped front foot). This insole gives optimal support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to lateral support to the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is thermodynamic, eliminating excess heat and preventing blistering.
J-Energy series. Low shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, pol yurethane insole with textile layer. Sizes: 35-48.
Low shoe in black recycled microfiber/velours (50% recycled polyester), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
Thin unlined welding glove made of soft and durable goatskin with Kevlar seams, REACH compatible.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is not required. The chinstrap incorporates a quick release buckle. Removable harness also fits all other Centurion helmets. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Care cream for hands and face. Time-tested qualities for heavily- stressed skin. Tube of 100ml.
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Works immediately after application: it normalizes perspiration and provides a fresh effect on the feet. The antiperspirant effect also limits irritation caused by excess sweat. The spray is very suitable for treating socks and shoes. Protects the leather parts of the shoe. Contains: flacon 100ml.
Composite gloves with dielectric properties coated with natural latex, with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 2: operating voltage 17,000V, test voltage 20,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Sizes: 8-11. In line with EN 60903.
Bodywarmer, 65% polyester, 35% cotton, 190gr/m²
