BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Boot S3 in black, heat resistant full grain leather. Toe cap in steel and synthetic anti-perforation sole. Lining in leather with heatresistant garments. Outer sole in Nitril STEINAU. Removable insole in Basic Grey. Sizes: 39 - 50.
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. Rapid, large absorption capacity.Bag of 20kg.
Lamp for attachment to the helmet F1SF/XF by MSA. The lamp is extremely powerful and adjustable. Completely waterproof. Equipped with an ergonomic switch. The XPS helmet lamp is photoluminescent, so they can be recognized easily in the dark. Led laser spot for better penetration of smoke, fog and water. Weight with batteries: 180g.
Sports goggles with grey-black frame with anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. Twilight coating: used in low light conditions, improves the contrast. The transmission factor is ideal outdoors, especially in the morning and the evening twilight. Supplied without glasses cord.
Thermal shirt with long sleeves in 100% polypropylene (130g/m²). Round neck, long sleeves, elongaited back, stitched seams, very breathable and moisture managing, thermally insulating, stain resistant, comfortable and ecologic. Available sizes: S-3XL. Available colours: anthracite grey. No PPE.
Safety helmet with integrated eye protection made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Laces, black in polyester. Length: 150cm. No PPE.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
High shoe in oiled nubuck leather with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
Lightweight and flexible chemical suit designed specifically for protection against Ebola and other viruses. Combines Type 3 <(>&<)> 4 design with the infectious agent protection of a barrier film and stitched and taped, fully sealed seams.
Hi-Vis T-Shirt with long sleeves and Cooldry yarns. This offers protection from the sun by a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Complies with: EN 20-471 class 3.
Bermuda Shift Covered with zipper, thigh pocket, 2 inset side pockets, D-ring, ruler pocket with tape measure pocket, adjustable elastic waist and 1 back pocket with snap button closure. Quality: 65% / 35% cotton / polyester, 2/1 twill weave, 290 gr / m². Available sizes: 44-66. Available colors: navy / gray, blue / gray, red / gray, black / gray and charcoal gray.
The Arbus cold storage bib and brace trousers protect you excellently against the cold with its fixed quilted lining. To stop the slightest breeze of wind, the legs can be narrowed and the hem adjusted. For your convenience, the braces come with a buckle, the knees are reinforced and the fly has a zipper. Exterior: Front fly with zipper, 2 inset pockets, Braces with buckle, Leg narrowing below by touch and close fastening, Knee reinforcement, Zip closure under flap with touch and close fastening at leg end, Adjustable hem at leg end with press studs. Inside: Fixed quilted lining. Fabric:100% polyamide; ± 185 g/m² + HV - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m². Color: Hi-vis yellow/navy.
Men's Shift work trousers with concealed zip, thigh pocket with concealed snap closure, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, 1 back pocket with concealed snap closure, reflective piping, D-ring and extra crotch insert to prevent tearing. Quality: 65% / 35% cotton / polyester, 290 g / m2. Available sizes: 44-66. Available colors: Navy / gray, black / gray, corn blue / gray, red / gray and charcoal gray.
Raincoat suitable for food industry: • Oil and cold resistant. • Wind and waterproof. • Fixed hood with drawstring • Neck with press stud fastening • Elastic in the sleeves • Washable at 95 degrees Quality: 50% polyester, 50% polyurethane, 240 g / m². Available sizes: XS-4XL. Available colors: blue and white. In accordance with: EN 343 3.1, EN 13034 and EN 1186.
Low shoe with water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Stylish multinorm HI-VIS softshell with hood. Quality: 60% modacrylic, 38% polyester and 2% carbon, 350 gr / m². available sizes: XS-5XL. Available colors: Hi-vis yellow/navy. Compliant with: EN-1149-5, EN ISO 20471 class 2, EN ISO 11612, EN 13034, EN ISO 11611 and IEC 61482.
Hi-vis parka: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inside pockets • adjustable cuffs Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black. In accordance with: EN ISO 20471 class 3.
A light jacket that offers you a very high level of protection, including ARC protection. This hi-vis Kaldvik rain jacket is made out of the new lightweight (280 g/m²) Siopor® Excell fabric. Different linings can be zipped in this soft and supple jacket. Furthermore, the Kaldvik has many practical features like the possibility of attaching a hood (available separately), narrowing the sleeve ends, 1 chest pocket, 2 inside pockets and a practical zipper grip for easily opening and closing the jacket. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Browguard with slip ratchet in polycarbonate Arc Pro to use in combination with the visors 225mm and 170mm for arc flash risks posed by electrical faults. This system is fully tested to protect up to 40cal/cm2.
Lab coat suitable for ESD environments: UPF 50+ fabric blocks 98% of UV radiation; 3 storage pockets; Phone pocket; Velcro adjustable cuffs for snug fit. Quality: 65% polyester, 34% cotton, 1% AST, 210g / m². Available sizes: XS-3XL. Available color: white, light blue and navy. Conforms to: EN 61340-5-1 (2016) and EN 1149 (2018).
Low shoe in microfibre/textile with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Flame retardant and anti-static hat. Provides protection in thermal risk environments. Comfortable and bi-elastic. Available color: Dark blue. Complies with: EN ISO 11612/15, EN 1149-5/18.
High shoe in nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Low shoe in velours leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Welding glass in mineral glass. Dimensions: 51X108mm.
• crew neck sweater; • ribbed collar, cuffs and bottom hem. Quality: 100% cotton, 280 g/m². Available sizes: XS-4XL. Colors available: Navy, Gray and Black.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Service pants in full stretch that provides maximum freedom of movement and comfort. Modern fit. Leg pockets on both sides with zip closure, phone pockets on both sides with Velcro closure. Folding rule pocket on the right side. Internal back pockets. Pre-bent knees. Internal pockets for knee protectors, adjustable in two height levels. Wider belt loop at the back to prevent pressure from belt. D-ring in front. Hidden attachment for holster pockets (ref. article 9042). Hidden button at front. Material:1: 65% polyester, 32% cotton, 3% EOL - 220 g/m2 Material 2: 91 ,5% nylon, 8,5% spandex Weight:250 g/m² Color comment:navy-58, grey-98, black-99 Gender:Men
Class 2 welding protection, elasticated cuffs for a secure fit, designed to be worn in a harsh working environment, designed with a comfortable fit, CE certified, this product is sold in pairs, UKCA marked. Outer fabric: split cowhide, thickness 1.3 mm Sizes: one size Standards: EN ISO 11611 Class 2 A1
White safety boot in PVC, fitted with a steel 200J toecap. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.
Perforated, absorbent black sweatband made of nylon for Centurion safety helmets Reflex, 1125 and Vulcan. separately certified as PPE.
Interior textile, 6-points with rotating knob. Leather sweatband. Sweatband for Iris II. No PPE.
Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands with closure. NPF: 50.
Soft yet robust technical liner, engineered to offer protection against the cold and heat, as well as cut level A4/D protection Exceptional anti-wear properties and double protection against thermal hazards. Extremely durable latex coating with increased resistance around the thumb for extended use. Conform EN388:3X43D EN511: X1X EN407: X2XXXX
Ergonomically shaped knee protectors with an outer layer of plastic, a foam rubber cushion and a breathable lining. Comfortable mode l with excellent fit! The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
Double Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Double Lanyard to allow continuous pro tection, even when switching between two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate openin g. Serves as connection between anchor point and harness.
Cellulose acetate shield, anti-fog coating, clear, length 225 mm. For use in combination with helmet holder S54B (1000790)/S54P (1023799) and adapter 3711 (1001188)/P3EV/2 (1001189) for mounting on Centurion safety helmets. Marking: EN 166 1 F 9 3 and EN 170 2-1.2.
Blue industrial paper roll, 100% recycled fibre. High tensile strength, more volume in the hand. High absorption. Dimensions: length 380 m x width 26 cm, 2 layers, 1000 sheets. For use with metal floor stand, art. no. 00330081.
Absorbent pads measuring 41 cm x 51 cm. These light-weight perforated absorption pads are packaged in a box. Packaged per 200 pieces . The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ide al for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 166 litres.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 69 litres. Content: 1 ro ll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of MRO qualit y.
1" connection
Freestanding emergency shower and eye-wash fountain 8300 Axion, fixed connection to the water. The shower is manually operated via the drawbar, the eye-wash fountain with foot pedal or the pressure plate. The receptot of thr eye-wash is in stainless steel, the shower head in ABS. Provision of security icon, and automatic control of water eye-wash fountain. Emergency shower Height: 211 cm. eye-wash fountain Height: 107 cm. Suitable for environments with risk of contamination by hazardous liquids. No PPE
Oval carabiner made of steel. Manual closure of the locking mechanism. Opening: 18 mm. Resistance: 25 kN. Weight: 156g.
Bomber, 100% polyester, PU coated, 190g./m². Fleece in collar, ID pocket, hood in collar, reflective bands.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Ladies t-shirt in 95% cotton/5% spandex, 190 gr/m² single jersey. Full- fashioned model with extra stretch for better wearing comfort. Smooth and thin V-neck. Available sizes: XS-XL. Available colours: Lime, Pink, Red, White, Turquoise, Purple, Navy, Black. Stockarticle in black, XS-L.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant textile liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49 (L) en 41-49 (XXL). general industrial applications.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 55 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Low shoe in microfiber, with a synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metalfree. Sizes: 35-48.
Long john (thermal) in 84% bamboo/11% spandex/5% polyester wicking. Very good thermal properties in medium or cold environment, regulates humidity, permanently anti bacterial, flatlock seams, stretch, perfect fit. Available sizes: XS-7XL. Available colours: black. No PPE.
Full face mask G1 with rubber headgear, successor to Ultra Elite mask, light, compact with wide field of vision on pc coated lens, and neckband. Improved air flow in the mask. Size medium, other sizes available on request, quick coupler, adjustable headgear, fully serviceable with voice membrane.
Protect your hearing and listen to the radio at the same time. Excellent FM-reception. Extra wide, padded headband that divides the weight and 2- points suspension with low pressure for long lasting wearing comfort. Soft ear cushions filled with foam and fluids. Battery life: around 40 hours. Audio input for mobile phones, MP3 players and communication transmitters£. Weight: 350g.
High quality dispenser with cleaning tissues, microfibre B401 and cleaning spray B411.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 60 cm to 63 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12, 14: 35-52.
Low shoe S1P in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Compact safety knife for routine cutting tasks. The metal-detectable plastic handle makes it easy to trace. It's concealed cutting edge easily copes with single-layerd card-board, film and packing tape and keeps your fingers safe. To order by 10 pieces. No PPE.
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
The full nitrile coating repels oil and liquids keeping hands dry and protected, whilst the new micropore nitrile palm coating ensures excellent grip in both dry and oily conditions. Conform EN3 88: 2016 level E cut resistance in such a fine touch, lightweight glove is unrivalled in the market place. Available sizes: 6-11.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate CBR65 lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision coating. Frame: black/white.
Fleece jacket in high vis: • spacious front pockets with zip • inside pockets • thumb grip on the cuffs • YKK zipper in the front Quality: 100% polyester. Available sizes: S-4XL. Available colors: Hi-Vis yellow / black and hi-vis orange / black .. In accordance with: EN ISO 20471 class 3.
Skipper unit with 9m long black/yellow safety tape. Can be attached to traffic cones, Skipper cones and Skipper's 1m safety posts. You can also attach Skipper directly to walls and magnetic surfaces using a support bracket. The Skipper range includes useful accessories such as a sign holder, safety light and receiver clips. The Skipper unit is robust and reliable thanks to the high quality materials and fabric tape. Suitable for outdoor use.
Low shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 38-48.
High shoe in Putek® Plus textile, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
White clog made out of microfiber with steel toecap. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Gray flame-retardant PU coating on 1 side, for strength and slip resistance. For light welding and grinding work. Vertical use. Free of asbestos. Short-term temperature resistance up to 600°C. Approved according to EN13501-1.
Bicolor softshell jacket with detachable hood. Contrasting zipper on the front and on the side pockets. Adjustable sleeves with velcro closure. Drawstrings at the hood and at the bottom hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. Oeko-Tex 100 certified. Quality: 100% recycled polyester, 280 g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Grey, Black/Red, Black/Orange and Gray/Black.
