BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
To create attachment point on tools. For material lighter than 2.3kg. Always use with Python Safety Quick wrap tape. Not PPE.
Classic goggles with appropriate fit for each face. Lens in gray polycarbonate: like all uvex PC lenses offer the gray tinted lenses 100% protection against harmful UV radiation to 400 nanometers. The gray tint filter parts of the visible spectrum and it offers protection against intense glare of sunlight among others. The color signal recognition of color remains unhindered. Protects against reflections and optical irritations outdoors (e. g. water surfaces) for greater visual comfort. With anti-scratch coating coating.
Flame retardant and antistatic fleece in 50% Protex/32% cotton/16% polyester/2% negastat (AST) (350g/m²). Full zip closure, straight collar, 2 front pockets with zipper, elongated back. Available sizes: S- 3XL. Available colours: navy.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Protection against a wide range of chemicals, acids, caustics, solvents, grease and oil. Constructed with a seamless knit liner (13 gauge) for maximum comfort and endurance. Lenght : 35,5 cm. Sizes: 8-11. In linde with: EN388:2016 3.X.4.3.E, EN ISO 374-1:2016 Type A: A.J.K.L.M.T, EN ISO 374-5:2016
Comfortable fire retardant bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. Protective liner is removable. Size: 53-63cm.
ABEK1HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 1 gas filter: for max. concentration of 0.1%.
High ranger shoe in Hypertex with Putek technology, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, waterresistant Tepor membrane. Outsole in Vibram, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 38-48.
This apron is made of polyethylene and is recommended for use in the food industry. Available colors: Blue, green, yellow, red and white. Dimensions: 117 * 69cm.
This cooling cap keeps your head cool in warm conditions. Fill the cap with a little water, spread the water over the cap, let the excess water run out and ready. The hat cools your head for up to 3 days! Quality: Inuteq Dry Nylon Available sizes: Universal Available colors: Grey
Low safety shoe in velours leather with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch and anti-fog coating. Prescription lenses in different diopters (+1,5/+2/+2,5). Marking: 2C-1.2 1 FT.
Classic fleece vest with the rich appearance of polyester. This vest has two zip pockets that allow you to store your belongings. Quality: 100% Polyester, 225 g / m². Available colors: Dark gray, black, navy and khaki. Available sizes: XS - 5XL.
Hi-vis ladies T-shirt for ambulance drivers with contrasting V-neck, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes Quality: 67% polyester / 33% cotton, 150gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: S-3XL. Conforms to: EN ISO 20471 Class 2.
Flame retardant ARC T-Shirt with round neck and knitted cuffs. Quality: Cantex Jersey 170AT, 170 g / m². Available colors: Navy. Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5.
Hi-vis chainsaw trousers 1RB5: Front fly with zipper 2 inset pockets 1 patched pocket with zipper on the back Elasticated waist with loops for belt and loops for velcro braces (ref. 5SD4). Quality:Water repellent 80% Polyester - 20% Cotton main fabric ± 200g/m². 100% polyester fabric with 100% PU coating; ± 195 g/m². mesh fabric (100% polyester ±140g/m2). Available sizes: S-3XL. Available colours: hi-vis yellow /black, hi-vis orange/black.
DuPont™ ProShield® 20 SFR. Limited flame spread coverall (index 1) with hood. Stitched external orange seams. Elasticated wrists, ankles, face and waist. Colours: Xhite Sizes: M-3XL. Compliant with: EN 1073-2:2002, EN ISO 13982-1:2004 +A1:2010, EN 13034:2005 + A1:2009, EN 1149-5:2008 and EN ISO 14116:2015.
Flame retardant women's chino pants with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Available sizes: 36-48. Available colours: navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Flame retardant and anti-static hi-vis waistcoat: V-neck; Zip closure; Without sleeves; Flame retardant reflective tape (50mm); Back length 70 cm. Quality: 98% polyester + 2% AST; ± 120 g/m². Available sizes: S-3XL. Available colours: Fluo yellow and fluo orange.
Hygiene set for Optime III.
Face shield Acetate Antifog for use with face shield holder S89 or helmet face shield holder S54 CE, made of acetate.
Foldable mask, class P2, for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. Masks packaged separately. NPF: 10.
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 4.5 kg. Cord 30m available (art. 1032349).
Stretch trousers with knee pockets and tool pockets from the Progression collection, enhanced visibility EN17353.
Firefighter boot in black water and firerepellant PBI fabric and microfiber, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on both sides in PBI. Sizes: 35-50.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with full peak, leather sweatband and a G2D suspension with slip adjustment (54-62cm). Vented helmet with slot for P3E adapter. Tested: lateral deformation (LD), molten splash metal (MM) and low temperature (-30°C).
Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Fitted with two standard carabiners. Serves a s connection between anchor point and harness.
The Com4-fit, with cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate bag. Colours: orange.
Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.
Replacement blades for knife Cartonax, straight. Thickness: 0,30 mm. No PPE.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Replacement knife for scrapers Argentax and Cleany. Packed per 10 pc. Length: 39mm.
Adjustable Nylon Cord for spectacle. No PPE.
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zip under storm flap with press stud fastening, sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343.
Low shoe in microfiber, with a synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metalfree. Sizes: 35-48.
Cut-resistant glove with Zirnium with PU coating and reinforcement in split leather between thumb and index finger. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 6-12.
Modern jeans trousers in 100% denim cotton (395g/m²) met CORDURA kneepockets for protection against abrasion and durability. Triple stitched seams, ruler pocket, hammer loop, double rear pocket, 2 side pockets. Available sizes: waist; 29-44", length; 30-36". Available colours: dark blue (denim).
Ceramic Pen and Box Cutter replacement blade • Blade lasts 10 times longer than a steel blade. • Snaps into the knife holder quickly and safely. • Fewer fractures. • The knife has 4 rounded cutting sides. • Cutting side has a length of 34 mm. • Very strong and cannot rust • Packs of 4
High ranger shoe in waterproof leather with metal toecap and metal anti-perforation sole. PU / PU sole, with added PU raised toecap. Fully padded water-tongue. Contains a Gore-Tex membrane. With chainsaw protection class 2. Sizes: 38-48.
Predominantly white cotton cleaning rags with some color mixed in. Box of 10 kg.
Flame retardant work jacket with increased visibility in a light and comfortable cloth with high tear resistance. Concealed zipper with press studs front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Completely metal-free. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Complies with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6.
Functional layer 3 wind- and water repellent jacket. Two breast pockets, left with inner phone pocket. ID-card holder. Two side pockets. Sleeve pocket on left arm. Inner pocket on the left side with handsfree opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for better comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 4XL. Available colors: Black, white, navy, grey, green, sky blue and red.
Plastic box for moldex full face mask. Dimensions: 29x19x27,5cm
Low shoe with water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Hat in 100% merino wool. Ideal for work with low to moderate physical effort. Quality: 100% merino wool, 300g / m². Available sizes: universal. Available colors: Black, navy and green.
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 41 X 71 X 2,5cm. No PPE
New portable fixed life 4-gas detector designed specifically for general workers and users. No live gas readings, and no training needed. When there is a gas alarm, the bell icon on the display will iluminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. It is maintenance free and has a fixed life of 2 year. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane.Compatible with Intellidox for Icon or nest when an other Intellidox is in use. CAUTION: The infrared LEL sensor does not measure hydrogen (H2) and acetylene (C2H2).
Overshoe in nonwoven PP with strong anti-slip sole in PVC. Color: white on top and blue on the sole. Size: 170 x 410 mm, no PPE.
Light, flexible banded earplugs made of a single piece, easy to wear around the neck. Caboflex is made of dimensionally stable plast ic and is perfectly washable and reusable. Excellent protection against universal noise.
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Lining that fits between cradle and helmet shell for full integration. CE approved to fit all Centurion helmets. No PPE.
Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.
Firefighter boots in fireresistant leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, a brasion resistant liner in Crosstech. BOA closing system. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
This glove offers excellent grip in dry, wet, and lightly oily environments. The single nitrile foam coating on the palm makes the g love soft and comfortable while still providing a secure grip. Cut protection level C and reinforcement between the thumb and index finger. Knitted 18 gg lining with cut-resistant CRF® technology and partially recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016+A1:2018: 4.X.4.3.C
Cold resistant gloves with a creative combination of high-tech, breathable materials (Hipora) and very high tactility. Lining with 40g of 3M Thinsulate®. The palm also has a double reinforcement. Touch screen-capable thumb fand index fingers. Sizes: S / M / L / XL / XXL.
Fluid-tight glove in jersey with neoprene coating, 30.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. The extra insulation layer makes the glove ideal for working for short periods with hot liquids at up to 180°C or in a cold environment up to -25°C. A popular model for the petroleum industry, for waste treatment and for the transportation and treatment of hazardous substances! Siliocne free.
Screen carrier made of heat resistant plastic, type S57. Protects against arc flash. Suitable for attachment of face shields s59/s60 3/s605/s613/s615/s760.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51 cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. Absorption capacity: 16 litres.
Standard casing for hand wheel valves. Not PPE.
Mini cable locking system - nylon cable The mini-cable locking system with nylon cable is also suitable for locking interrupters. Not PPE.
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters. Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.
Aluminized jacket, the exterior consists of a flexible cloth aluminised, lining is a layer cotton Proban, push-buttons with velcro closure of 5 cm width, ventilation under the arms, high collar in grainleather with velcro closure, 2 covered splits on the sides for better freedom of movement, length 110 cm, length sleeves 80cm. Available in: aluminised soft.
Spray for the cleaning and rinsing dust and dirt from eyes and wounds. The spray provides a gentle stream of moisture and has a total rinsing time of 5 minutes. The spray can be used several times and is sterile to the last drop. Contains 150ml sterile saline solution 0.9%NaCl. Environmentally friendly propellant. Fits in the first-aid station.
Anti-static absorbent wipes on 38 cm x 46 m sized roll, sheets perforated lengthwise every 23 cm. These medium-weight double-perforated pads on a roll are packaged in a box. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. Absorption capacity: 73 litres.
Earmuff for helmet X5 with double-cast (TPU/ABS) housing with details in bright colours for a increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 36dB.
Rebel fall-prevention device with 15 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from the fall-protection mode to the rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.