BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Low shoe in waterresistant nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Hi-vis ladies T-shirt for ambulance drivers with contrasting V-neck, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes Quality: 67% polyester / 33% cotton, 150gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: S-3XL. Conforms to: EN ISO 20471 Class 2.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Cap with reinforced front, 6 panels, with ventilation holes, curved flap with contrast colored edge and adjustable metal clip closure. Quality: 100% cotton (drill, heavily combed), 350 g / m². Available sizes: Universal. Available colors: Black and navy.
Safety vest consisting of 100% polyester with a velcro closure. Available in: fluorescent yellow and fluorescent orange. Sizes: XS-5XL.
Brushed fleece body warmer with long zip. Brushed on both sides. Two front pockets, contrasting zips and decorative stitching on the sleeves. Elastic tape on the bottom hem and cuffs. Quality: 100% polyester, 280 g / m² Available sizes: S - 5XL. Available colors: Black, Navy, Lime, Gray, Blue and Red.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 4.5 kg. Cord 30m available (art. 1032349).
Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
T-shirt Multinorm 103004 with long sleeves and reflective bands. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colors: Navy. Available sizes: XS-5XL. Complies with: EN 1149-5:2008 and EN ISO 11612:2015.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
This Safety vest provides extra comfort for the wearer through a zipper. Please note: the size combination XS-S is certified according to EN ISO 20471: 2013, Class 1. The safety vest has a stitched striping. Quality: 100% polyester, Warp knit, 120 g / m². Available colors: Fluo Orange and Fluo yellow. Sizes: XS / S - 5XL. Conform: The Rijkswaterstaat guidelines are applied, just like the EN ISO 20471: 2013 / Class 2 standard for High Visibility.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Work trousers from the HAVEP® Multiprotector+ Inherent FR collection. These pants meet 6 safety standards and are made of modacrylic with organic cotton. Conforms to: EN 1149, EN 13034-6, EN IEC 61482, EN ISO 11611, EN ISO 11612, ISO EN 20471 Available colours: fluo orange/grey Available sizes: 44-68
Antistatic chemical-resistant gloves for protection against oil, paint, solvents and detergents in environments with a risk of electrostatic discharges.
Rain trousers Hydrosoft Southend. Elastic at the waist, adjustable legs with press studs, 170 grams (+/- 10gr). Available sizes: S - 3XL Available colours: Yellow, green, royal blue, orange, navy
Professional Outdoor Neyfik spray fire extinguisher class 5A/21B. Very compact and effective extinguisher suitable for burning liquids and solids. The spray is supplied with a vehicle holder. Each spray extinguisher also contains a check schedule that, if desired, can be used to perform periodic checks. The spray extinguisher is completely maintenance-free and has a lifespan of 5 years. The spray is supplied with a vehicle holder. This model contains French text excluding control schedule. This model is also available with Dutch text including inspection schedule (art. 1044623).
New portable fixed life 4-gas detector designed specifically for general workers and users. No live gas readings, and no training needed. When there is a gas alarm, the bell icon on the display will iluminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. It is maintenance free and has a fixed life of 2 year. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane.Compatible with Intellidox for Icon or nest when an other Intellidox is in use. CAUTION: The infrared LEL sensor does not measure hydrogen (H2) and acetylene (C2H2).
Flexible and close-fitting glove made of Guide HXFIBR material that offers cut protection and excellent dexterity. With nitrile coating on the palm for good grip, with high-visibility orange TPR/TPU impact protection on the back, and open fingertips for maximum flexibility.
Fluid-tight glove in jersey with neoprene coating, 30.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. The extra insulation layer makes the glove ideal for working for short periods with hot liquids at up to 180°C or in a cold environment up to -25°C. A popular model for the petroleum industry, for waste treatment and for the transportation and treatment of hazardous substances! Siliocne free.
Basic glasses having temples with limited adjustability. Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Hazardous electrical voltage. Hazard warning sign in self-adhesive polyester. 1 pictogram. Dimensions: 200mm.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate with silicate coating, provides very wide field of vision (95 %). Speech is conveyed via the speech membrane, which provides clear speech transmission. Speech membrane is positioned so the filter is not in front of it. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling. Also available order in size small or in silicone rubber.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Replacement hood for hood S-655.
Long hose of lightweight PU that connects between Versaflo or Jupiter motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo or Jupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length: 965 mm.
Hi-vis pull-over / Soft / Fabric / Grey fi nish at cuffs and collar / Elasticated reflective tape for improved comfort / Decorative seams / Outside: Straight collar / Hidden zip closure / Round inset sleeves / Knitted wind cuffsin sleeves / Back length 72 cm (L) / Fabric: 71% molleton polyester - 25% viscose - 4% elasthane; ± 280 g/m² Colour: 707 hi-vis orange/grey - 856 hi-vis yellow/grey
Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 10,000 volts, operating voltage of 7,500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Disposable safety cutter for left- and righthanded. For opening different packages. The blade is not replaceable. In this way, the knife can not get lost. Again, the safety technique of recoil knife is applied. The knife fits in any pocket. No PPE.
GH4 chinstrap for the G3000 safety helmet.
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
Low shoe in black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Fall-stop device, 2,5 metre strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Only for vertical use. Weight: 1.64 kg. Max user weight: 140 kg.
Automatic retractable cutter in the form of a pen with replaceable ceramic blades. Rubber holder Double sided ceramic knife is specially designed to stay sharper and cause fewer accidents. Remains up to 10x sharper than regular replacement blades. Replacement blades: 1025874
configuratie op aanvraag/configuration sur demande
Double safety line, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Safety line tested according to sharp side test and thus extremely reliable for use near sharp edges. Double safety line to allow continuous protection, even when switching between two anchor points. Fitted with one standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
White lightweight, all-round clog in moulded, antibacterial EVA. Side ventilation holes for better breathability. Anti-slip Nitrile sole. With adjustable strap for heel support. Sizes: 37-46. Not PPE.
Rebel fall-prevention device with 15 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from the fall-protection mode to the rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Foreseen with a mirror polycarbonate lens with a antivapor and anti scratch coating.
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zip under storm flap with press stud fastening, sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343.
System for attaching most types of chemical gloves to the garment sleeve through the use of 2 concentric rings. Very easy to attach your chemical gloves to the Chemmax coverall. 1 box contains 5 sets for 5 coveralls (10 black and 10 white rings). For use with CHEMMAX 1,2 and 3 coveralls. In line with EN 14605 Type 3 in combination with coveralls.
Manually retractable cutter in the form of a pen with replaceable ceramic blades. Rubber holder Double sided ceramic knife is specially designed to stay sharper and cause fewer accidents. Stays sharp for up to 10x longer than normal replacement blades. Orange version. Knife can be blocked. No PPE.
Flame retardant and antistatic neckwarmer (buff) in Nomex® and meta- aramid polar fleece. Keeps bodytemperature in cold environments. Protects against heat and antistatic risks. Available size: universal. Available colour: paris blue.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.
Set of 3 replacement filters for Aircare filter unit.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds. With thumb hole and Velcro closure on upper arm.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, mercury vapour and particulates.
Rain set, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams. Jacket: Fixed hood with drawstring, zip under storm flap with popper fastening, adjustable press stud fastening sleeves, 2 straight pockets. Pants: Elastic at the waist, 2 side pockets, adjustable press-stud closure at the bottom of the leg, 3M reflection. Complies with: EN 343, EN ISO 20471 class 2.
Bodytrousers in 65% cotton/35% polyester (290g/m²). Covered zipper with press-studs, 2 side pockets, 2 side slits, breast pocket with flap, pen pocket, handy pocket, back pocket with flap, ruler pocket with flexible steel ruler pocket, knee pockets, elasticated back and elasticated shoulders. Available sizes: 46-64. Available colours: navy, Cornflower blue.
High shoe in waterresistant oiled leather, with a non metallic antiperforation sole and 200J toecap. Fitted with a breathable, abrasion resistant liner in Coolmax. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, ergonomic insole. Sizes: 35-49.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Tool to fix the atex battery TR-830 to the Atex motor unit TR-802E. No PPE.
Plastic box for moldex full face mask. Dimensions: 29x19x27,5cm
This T-shirt from the Casual line is washable at 60 degrees. The elastane provides a nice fit and a high wearing comfort. After washing you can easily dry the T-Shirt in the dryer. Available sizes: XS-5XL. Available colors: white, black, navy, royal blue, red and dark gray.
Parka Gore Tex Diablo multinorm: - 2 front pockets; - 1 napoleon bag; - 1 breast pocket; - 1 inner pocket. Quality: PES / CARBON WITH GORE PYRAD TECNOLOGY Available sizes: XS-3XL. Available colors: Fluo yellow / navy, fluo yellow / gray and fluo orange / gray. Compliant with: EN 343 4:4, EN ISO 20471 class 2/3, EN ISO 11612, EN ISO 14116, EN 13034 type 6, EN 1149-5 and IEC 61482-2 class 2.
Black fitover safety glasses with pressure-free fit and hinge (foldable). Very light, fits over most prescription glasses. Frame in synthetic material and CBR65 polycarbonate lenses with integrated side shields. The innovativetemple concept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With Supravision Excellence coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Jacket Shift with zipper, 1 chest pocket on the left with concealed press studs, sleeves with adjustable press studs, 2 inset side pockets with press stud fastening, reflective piping, D-ring, extended back. Quality: 65% / 35% polyester / cotton, 2/1 twill weave, 245 gr / m². Available colors: Charcoal gray, black / gray and navy / gray. Available sizes: S-4XL.
This fully certified combat trouser in a contrast navy colourway has a multitude of clever features. The predominantly Navy colourway ensures that your trousers look great and keep clean for longer. Durable polyester/cotton fabric with Texpel stain resistant finish 50+ UPF rated fabric to block 98% of UV rays Reflective tape for increased visibility 8 pockets for ample storage Phone pocket Rule pocket D-ring for keys or ID cards Elasticated back waist for a secure fit Certified to EN ISO 20471 after 50x washes CE certified Two back patch pockets Side access pockets Contrast colouring for added style Premium stain resistant finish repels oil, water and grime Triple-stitched seams for extra durability Twin-stitched seams for extra durability. Quality: 65% polyester / 35% cotton. Available sizes: S-2XL. Available colors: Fluo yellow / navy, fluo orange / navy. Complies with: EN ISO 20471 class 1.
Stylish multinorm HI-VIS softshell with hood. Quality: 60% modacrylic, 38% polyester and 2% carbon, 350 gr / m². available sizes: XS-5XL. Available colors: Hi-vis yellow/navy. Compliant with: EN-1149-5, EN ISO 20471 class 2, EN ISO 11612, EN 13034, EN ISO 11611 and IEC 61482.
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 41 X 71 X 2,5cm. No PPE
This new patented Dry Cooling technology, in partnership with Inuteq B.V, is designed to provide enhanced cooling comfort for the wearer. This revolutionary technology is activated with a small amount of water and re-activation is only required every 1-3 days depending on the environment, humidity and airflow.
Comfortable, lightweight safety glasses made of synthetic material. Complete field of vision thanks to special curvature of the lens. Lens in grey polycarbonate with scratch resistant, anti-fog coating. Extra options: Tada glasses case. For light- or medium-duty mechanical work.
Premium grain goatskin leather combined with cut and impact protection glove. TPR impact protection on top of the hand and the full lenght of the fingers. Additional palm leather layer enhances cut resistance. Reinforced seams on the index finger and base of thumb. Secure cuff closure with TPR tab closure. Sizes: 8-13.
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Low shoe in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. BOA-closing system. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12).
Sandal in microfiber/textile with a synthetic toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant. 100% metal- and leather free.
Welding vest FR08: Protects against radiant, convection and contact heat; 100% Metal Free; Industrial wash at 75°C and machine dry 155°C; Flame Retardant Industrial Washable Striping; antistatic; Extended back for more protection; Radio loops for easy attachment of a radio; Velcro adjustable cuffs for a snug fit. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available colours: Gray and Royal Blue. Available sizes: S-3XL. In accordance with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1, EN 13034 Type PB [6] and ASTM F1959/F1959M-12 ATPV 16 CAL/CM2 (HAF 83.7%).
Electric Arc hood in softshell fabric with high arc protection. Helmet - Robust helmet with durable shell construction and chin strap. Cooling vents for improved air circulation and comfort. RX0018 - Highly transparent 3Phase® Arc Flash protection lift-front visor. Combined set with Electric Arc hood 9179, integrated lift-front visor RX0018 and helmet with chin strap. Available sizes: Universal. Available colours: Navy.
