BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Firefighting trousers in NOMEX® STRIKE (220g/m²), SOFIGUARD treated with PU FR membrane (145g/m²), internal aramid (ARALINEX) lining (250g/m²). Press-stud closure under velcro, external reinforcements on knees, executed in 2 parts for easy bending, removable suspenders, 2 patched leg pockets with extra knee pads in neopreen. bottom finished for protection against water rising, leg hem provided with KEVLAR® re inforcements, leg cuffs. Available sizes: 164/82 untill 194/124. Available colours: navy.
Cut resistant arm guard, with unique design so that the sleeve stays in place at hand level and does not curl up. With extra elastic at the wrist. In 13 gauge HXFIBR fiber mixed with polyester and ealstan for a good fit. Suitable for use with food. ESD approved according to EN16350. Available in sizes M-XL.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Haevy duty backpack in flame retardant fabric to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
Knitted cotton (interlock), with knitted wrist, men?s and women?s size. NO PPE
Lightweight and very comfortable face shield, widht: 450 mm x hight: 250 mm. With individually adjustable headband and forehead protection. Cellulose acetate visor: scratch and chemical resistant, but is not suitable for use at high temperatures or as protection against high impact. with: EN 166.
Black sock with grey foot. Excellent moisture control to work in warm conditions. Fitted with an extra heel, toe and shinbone protection, and extra leg and ankle support. Antibacterial. ESD: electrostatic discharge. Made of: 35% cotton, 24% polyamide, 20% polyester (Pro-Cool EcoMade), 14% acryl, 1% Bekinox, 1% Lycra elastane. Available in: anthracite, black. No PPE.
High shoe in black water repellent full grain leather, with a warm fleece lining. Fitted with a steel perforation sole and 200J toecap. The toecap has an extra protection layer. Antistatic insole with moisture control system for a comfortable feeling. Equipped with a shock absorbing insole from Uvex 3D Hydroflex. Outsole in PU 2 densities, specially shaped for better slip resistance. Sizes: 38-50.
High shoe in black velours leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 42.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Vibram outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
High welding shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a velcro and breathable, abrasion resistant liner in textile. Outsole in PU/Nitrile, SRC antislip, oil and carburant resistant. Fire proof stitching in para- aramide. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 38-48.
Performed in the latest innovative design. This timeless two-color hi-vis jacket is stylish and practical. The chest pockets are suitable for the modern mobile phone dimensions and the spacious pockets on the bottom are equipped with a zipper to safely store stuff. Other features are the reflective piping, HiVisTex Pro reflective striping, the Velcro adjustable cuffs and the reinforced double stitched seams. Quality: 65% polyester / 35% cotton. Available colors: Fluo yellow / navy, fluo orange / navy, fluo yellow / black and fluo orange / black. Available sizes: S-3XL. Complies with: EN ISO 20471 Class 3.
Wind and waterproof jacket with taped seams: • 2-way zip with flap covered with a snap closure • double breast pockets with flap and velcro closure • waterproof zippers • loop for badge holder • side pockets lined with fleece • three large inner pockets • removable and adjustable hood • adjustable sleeves with velcro • adjustable waist • extended back Quality: 100% polyester, 200 g / m² Color: Navy, black and gray. Sizes: XS-4XL.
Black safety boot in PVC, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Low black shoe in brodequin design. Leg in water resistant full grain leather. Padded leg (upper) in compact foam, lined with leather for improved comfort and shin bone and Achilles tendon protection. Inner lining in 3-dimensional foam with open structure for good ventilation of the foot. Closed leather velour tongue to prevent small particles from entering the shoe. Shoe provided with a support to avoid swelling of the heel. Sole: Softane comfort layer, flexible and light with shock absorption. Sole is resistant to abrasives, hydrocarbons, oils and fats. Outdoor profile with self-cleaning studs. Full protection of the shoe thanks to a wide perforated protective toecap in Aérane-Tech polymer, which makes the shoe lighter. Thanks to the perforated toecap, the sweat can easily leave the shoe. The mid-sole is sewn straight to the leg, which makes the foot 100% enclosed. The anti-perforation mid-sole Flextane by Jallatte is 100% composite. Sizes: 35-47.
White gloves made of light cotton. Sensitect gloves have a perfect fit, and are ergonomic and extremely comfortable due to the Interlock quality. Can be worn either as a liner glove or for product protection.
High shoe in black nubuck leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39- 47.
Comfortable half-mask made of silicone rubber, compact form with good fit to the face. Fitted with adjustable head and neck bands for precise adjustment of the mask. With the quick release system it's very easy to don and remove the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
The Polar BUFF contains Polartec fleece at the neck for extra warmth. This buff is recommended for use in static work in cold conditions. Quality: 97% Polyester 3% Elastane. Available sizes: Universal. Available colors: Fluo yellow / navy, fluo orange / navy, navy and black.
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
Innovative compact folding mask with 7 dynamic parts providing excellent facial movement with maximum comfort. Valved and with inner foam to increase the comfort of the wearer. DOLOMITE optional clogging test. An individual polybag and special flat shape make it easy to store and vending machine ready. Disposable mask FFP3 level, protects against solid and liquid particles of high toxicity. NPF:50.
Sweatvest Fleece Luxe has a contemporary fitted fit. This product is finished at the bottom and at the end of the sleeves with elastic tape that ensures that the garment fits perfectly around the body. Also, at the bottom of the sleeves a thumb hole is made so you can let your sleeves fit around the palm of your hands. That gives an extra protection against wind and cold. Handy pockets on the outside as well as on the inside of the Sweatvest ensure that you can carry all your essentials with you, such as phone, cards and keys. Fabric: 100% polyester, Microfleece, 280 g / m². Available colors: Red, royal blue, navy, black and gray. Available sizes: XS-7XL.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Helmet hearing protector Sana 30 for safety helmet CENTURION.
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for better comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surface. Sizes: universal size.
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
Lightweight and very comfortable face shield, 450 x 200 mm. With individually adjustable headband and forehead protection. Cellulose acetate visor: scratch and chemical resistant, but is not suitable for use at high temperatures or as protection against high impact. Suitable for: chemical and petrochemical industries.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling poin t >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. S uitable for: processes involving chemical risks. Weight: 370g.
Fire resistant air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
Replacement knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Matching detachable hood for parka Sentai. Colour: Navy
Glove with PE and Zirnium with PU coating and reinforcement in split leather on palm, index finger and thumb. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 7 / 8 / 9 / 10 / 11.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Laces, black in polyester. Length: 125cm. No PPE.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.
Safety glasses in clear polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (40g). Foreseen of a an adjustable nose bridge and Geco-injected temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging. Fits over most prescription glasses.
Functional layer 3 wind- and water repellent softshell jacket. Quilted padded lining. Two breast pockets, left with inner phone pocket. ID-card holder. Two side pockets. Sleeve pocket on left arm. Inner pocket on the left side with handsfree opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for better comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 4XL. Available colors: Black, white, navy, grey, green, sky blue and red.
Comfortable and breathable trousers with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Hi-vis ladies' polo for ambulance workers with contrasting collar, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes. Quality: 60/40 cotton / polyester piqué tricot 180 gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: XS-3XL. Conforms to: EN ISO 20471 Class 2.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colou r: black.
High shoe in waterresistant full grain leather with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in GoreTex. Sole in PU/Nitril. Sizes: 39-48.
The Mizar is a TÜV-approved safety knife with automatic blade retraction that is excellent for cutting many different packaging materials, especially cardboard and foil. A high-quality plastic construction in a handy ergonomic design is the key to working efficiently. This means fatigue-free work for the user and increased productivity for the company. With its unique "3 in 1" slider, the knife can be quickly and easily unlocked for cutting when needed, securely locked for transport, and easily opened for blade replacement. With its sqeeze lever grip, both right-handed and left-handed users can cut equally well. The blade can be changed without tools, simply, quickly and safely. No PPE. Blades: 1016008
Black low shoe S3 in full grain leather with steel toecap and synthetic antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D/XD: 39-48. XD is available March 2019.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
Case in polypropylene (heavy duty) with two bottles DIPHOTERINE® 500ml bottle AFTERWASH II® 200ml (www.prevor.com) - spray MINIdap. With option to secure TRIVOREX® granules. This package includes a solution for first aid involving eye contact and (limited) contact with skin. www.prevor.com
100 individually packaged silicone-free cleaning wipes in dispenser. Suitable for all lenses. No PPE.
Vlamvertragende in antistatische fleece voering met lange mouwen. Comfortabel dan een warme fleecen voering. Daarnaast is de Troston ook vlamvertragend en antistatisch en kan gemakkelijk in verschillende jassen ingeritst worden. Kwaliteit: Dubbelzijdige fleece: 54% modacryl + 34.2% FR katoen + 10% nylon + 1.8% AST; ± 260 g / m². Beschikbare maten: S-3XL. Beschikbare kleuren: Marine. Conform: EN ISO 11612: 2015 / A1 B1 C2 F1, EN ISO 14116: 2015 / IND.3, EN 1149-5: 2018 en EN 14058.
Seemless knitted glove 18 gauge with nylon, spandex, carbon fibres and a FORTIX™ foam nitrile coating on the palm. This glove has ES D-functionalitye certified to EN16350, protection products against electrostatic discharge. It is also touchscreen compatible and dermatologically approved by Dermatest and certified by OEKO-TEX®. The nitrile foam coating offers excellent grip and long lastingprotection. The careful selection of materials, the Ansel ZONZ™ Comfort Fit Technology and proprietary washing process makes the HyFlex® 11-819 a clean, ultra breathable and highly comfortable glove. The glove is latex and silicone free, and laudryable at 40°C. Sizes: 6-11.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.
• 18 gauge gray Kyorene® Pro graphene liner • Black HCT®-Nitrile Nanofoam coating on the palm •Reinforced thumb hole • Touch screen • No stainless steel or fiberglass • Ergonomically shaped for a superior fit • Bacteriostatic kills harmful bacteria • Heat regulation keeps hands comfortable • Odor neutralization so that the gloves stay smelling fresh Conforms to: EN388:2016:4X42D
Classic fitover glasses with unlimited field of vision. Soft temples (DCT). Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. In line with: EN166/170 2-1.2.
Overshoes, CPE, heavy version (90 micron, one size. Available in: blue. Package containing 50 pieces. No PPE.
Glove in roughened interlock with nitrile coating (35 cm long). Smooth Solknit offers excellent abrasion resistance and a perfect grip on wet and oiled materials. It also protects against a wide range of chemicals, detergents and solvents. Extremely suitable for the chemical industry, the paint and petroleum sector, the transportation and treatment of hazardous substances. Food approved, antistatic and silicone free.
Jacket, 100% polyester, 150 gr./m², water-repellent finish, 100% thermal polyester filling 300 gr./m², insulating, lined hood, padded collar, two patch pockets with flap, patch breast pocket with flap and ID pocket, zip with storm flap and velcro, tricot cuffs, 1 horizontal reflective stripe on chest and back, water vapor permeability and even at temperatures between 5 ° C and -40 ° C. Available in: navy. Suitable for cold stores and cold stores. Sizes: S - 3XL.
Green safety boot in polyurethane, fitted with a steel toecap and steel anti-perforation midsole. Antibacterial treated lining. Improved insole; premium, 3x better moisture absorption, 100% better energy absorption. Shock-absorbing antislip sole. Thermal insulation for temperatures down to -50°C. Sizes: 37/38, 39/40, 41-43, 44/45, 46-48. Resistance: minerals, animal and plant oils and fats, disinfectants, fertilizer, solvents, various chemicals. A strong, durable Purofort boot for a variety of uses in the agricultural sector.
Very finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 100°C for 15 sec. Sizes 7/ 9/ 11.
Thin airy working or inner glove, tight knit in cotton and spandex. Tight fit. Sizes: 6-10.
The reusable Whisper+ detect earplugs from Uvex, fitted with a cord, provide unrivalled wearing comfort due to the soft ribs and pre formed design. Can be washed daily with normal soap under running water, which makes them economical. Available in package containin g 50 individually boxed pairs. Available in: blue.
Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
A new designed lightweight safety shoe with knitted textile upper and BOA® Fit System. Outstanding ergonomics, padded Memory foam and water repellency means day-long safety and comfort. An oil resistant RPU outer sole gives outstanding grip and a ventilated inner sole keeps feet cool. Features JALAS® aluminium toe cap, plasma-treated textile puncture protection and double impact protection zones in PORON® XRD®.
Stretchy glove, seamlessly knitted with blue Dacron fibres.
Heat and cold insulating insert sole made of 100% wool. Fits in any shoe and is mainly worn in the winter. Material: 100% wool. Suit able for: general industrial applications.
