Anti-static absorbent pads measuring 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 piece s. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 112 litres.

These comfortable and scratch resistant, lightweight safety glasses provide a complete field of vision thanks tothe special curvature of the lens. Temples are adjustable in the lengthand height. Lens in grey polycarbonate with anti-scratch coating. Delivered with cord. For work in bright sunlight.

Headband with adjustable ratchet, face screen and chincup in clear PC. Screen has an anti-fog coating. System with foldable hinge.

ABEK1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.

Earmuff X4 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Despite recent innovations, these earphones have an extra small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3 respiratory and eye protection. SNR: 33dB.

Low office shoe in full grain leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-47.

Low shoe in nubuck leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 38-47.

High shoe S3 in waterresistant black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35-52.

Easy care polyester/cotton pants that keeps the shape and color. Spacious pockets on the front. Back pockets and leg pocket with pocket flap. Folder rule pocket. Size C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton. Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C42-C64 (extendable to C142-164), D84-D120.

Low shoe S1P in perforated microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).

Refill pack containing 500 pairs of EAR Classic for One Touch dispenser (1031971).

Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.

Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters. Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.

Medium oily, silicone-free care cream for use after work. Stokolan sensitive penetrates rapidly and is suitable for any type of skin. Free from perfume, preservatives and colourants Dermatologically certified and skin-friendly With 9.5% natural moisturising factor (NMF). With ECARE quality label for allergy-friendly products with creatine and other oily, moisturising components. In line with HACCP and suitable for use in the food industry Easy to rub in Description: Soft Cream (O/W-emulsion). Free from perfume, preservatives and colourants, silicone and parabens. Suitable for hands and face. Content: tube of 100ml.

High, brown, welling safety boot in full grain leather with steel toecap, steel sole plate and scuffcap. Leather lining and leather insole. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/rubber: slip resistant, high wear resistance and optimal heat resistance to 300°C (HRO). Sizes: 37-48.

Gloves made of heavy cowsplit leather. The gloves are lined and have a rubber reinforced cuff (7cm), elastic in the back and protection at the knuckles.

Safety glasses with transparent frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. This version includes foam and band. Lenses made from polycarbonate with an anti-scratch and anti-vapour layer. With Platinum-coating: This treatment offers additional security, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord.

J-Energy series. Low shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.

Hi-vis men's polo for ambulance drivers with contrasting collar, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes Quality: 60/40 cotton / polyester piqué tricot 180 gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: S-4XL. Conforms to: EN ISO 20471 Class 2.

The reusable Whisper+ detect earplugs from Uvex, fitted with a cord, provide unrivalled wearing comfort due to the soft ribs and pre formed design. Can be washed daily with normal soap under running water, which makes them economical. Available in package containin g 50 individually boxed pairs. Available in: blue.

Pigskin leather gloves for light work. The glove has elastic on the outside and durable reinforcement of the seams, knuckles, fingertips and wrist. Pisa Nerf version: with a grain leather palm and cotton fibre backing. 6 cm protective cuff.

Flexible glove in high quality flocked nitrile. The high abrasion and perforation resistance make this model excellent for the treatment of chemicals in refineries and for degreasing processes (e.g. in aviation and automotive sectors), drilling and cutting.

Lightweight disposable breathing hood with hood made of WEB 24 and visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 100 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.

Folding mask, class P3, for toxic dust. Comfortable 3-piece folding mask. With non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 50.

Work trousers with hidden zipper, 2 wide side pockets, 1 extra pocket with zipper, 2 large back pockets, 1 with flap, loose ruler pocket with extra tool pockets, large hanging hip pocket with flap and extra storage options thanks to the integrated mobile phone pocket and the extra tool pockets. accessible Cordura® knee pockets with opening at the top lockable with flap and Velcro, pre-formed trouser legs for a very good fit, Cordura® reinforcements and triple stitched seams at vulnerable places for extra long life, wide belt loops, adjustable hammer loop. push button, highly breathable stretch fabric (polyamide / Lycra) in the back of the knee for optimal wearing comfort, extra insertion at crotch to prevent tearing, 1 D-ring for badge holder and reflective piping. Quality: 65% / 35% cotton / polyester, canvas, 320 gr / m2. Available colors: navy, white, black, beige, green and gray. Available sizes: Regular 44-66, Lenght sizes 49-57, Belly sizes 24-29.

Flame retardant signaling waistcoat with 2 horizontal and 2 vertical reflection bands. Suitable for work where high visibility is important. Available sizes: S / M - 4XL / 5XL. Available colors: Fluo yellow and fluo orange. In accordance with: EN ISO 20471 Class 2 and EN 14116 Index 1.

Winter bomber jacket with detachable sleeves / Multi-functional jacket with detachable sleeves and fur lining / Stitched seams / Outside: Detachable fur collar / Straight collar / Zip closure / 2 patched chest pocketswith zip closure / 2 inset chest pockets / 1 phone pocket / 1 sleeve pocket /1 pen pocket / 1 loop for badge / Detachable sleeves / Round inset sleeves / Knitted wind cuffs at end of sleeves / Elasticated hem / Back length 75 cm (L) / Inside: Fixed lining: polyamide body + quilted sleeves / 1 inside pocketLining: Detachable fur lining / 1 inside pocketFabric: 60% polyamide - 40% cotton; ± 280 g/m² Colour: B75 navy - G60 green - H45 royal blue - M45 gey - N20 black - R18 red

Lamp with wide uniform beam that can be oriented (45°). Adjustable and washable elastic headband. Easy to wear on the head or directly mountable on a helmet. Large rotating selector button facilitates manipulation with gloves. Lumens: 25. Waterproof: 1m for 30min. Weight: 160g.

Durable heatprotective quality leather in the palm of this welding glove. Back of the hand in aluminised para-aramide. Hand is completely lined with para-aramid/cotton fabric and a Porelle membrane: water- and damp-proof. Sizes: 8-9-10-11.Length 45 cm.

Women's Microfleece Jacket: • raglan sleeves; • zip up to the top of the collar with chin guard; • slanting vertical breast pocket with zip; • two side pockets with concealed zips; • two inner pockets. Quality: 100% Polyester, 185 g/m². Available sizes: XS-3XL. Available colors: red, navy, gray and black.

Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Reduced peak. W ith woven ventilation opening along the side. Size: 54-62cm.

High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. With breat hable, abrasion resistant lining in BIOACTIVE textile. Sole in PU/Vibram, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Scuffcap resistant against abrasion. Sizes: 37-47.

Signalization softshell jacket: • good breathability; • chin protection; • chest pocket with zipper; • two side pockets with zipper; • two inner pockets; • adjustable waist. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: fluo yellow / black, fluo orange / black. Complies with: EN ISO 20471 Class 3/2.

Low shoe Run in water repellent split suede with Geox side transpiration system (Net Breathing System). Equipped with an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable nylon and breathable insole. Sole in PU/PU. Sizes: 35-48.

High shoe in waterresistant full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU (Infinergy) extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.

Light yellow hearing protector for attachment to helmet, made of combination of plastic and stainless steel. Very light model with e rgonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.

Smartfit earplugs with removable cord are made of a very advanced material: Kraton. This material responds to body heat and adapts t o the shape of the ear canal. They are also packaged in a handy storage box.

Stretchy glove, seamlessly knitted with blue Dacron fibres.

Welding vest from flame retardant cotton (330g / m²) with 2 chest pockets, mobile phone pocket under flap, double stitched for extra strength.

The self-adhesive surface of the plaster is exposed when a plaster is removed from the dispenser. This makes it easier to apply. Content: 40self-adhesive fabric plasters (1022669) and 45 self-adhesive plastic plasters (1022670). The refills are stored in the dispenser and can only be removed through use of the special red key.

Helmet attachment system made of plastic, for use with all Fitt All Elect visors. Entirely metal-free, for use in electrical installations.

PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.

Very comfortable seamless knit glove in a nylon double-nitrile fabric for superior grip. Sizes: 6-11.

Very light sportive low shoe in microporous washable leather and lining in mesh nylon for more comfort. Outsole in very light material EVA, SRA anti-slip. Sizes: 36-42.

Balaclava, inherently flame retardant. Quality: 60% Modacrylic, 39% cotton, 1% carbon thread. Complies with: EN ISO 11612 A1.B1.C1.F1, EN 1149-5, 61482-2 class 1. Available colors: Marine. available sizes: Universal.

Ergonomic pre-shaped dust mask in soft filter cloth with nose pad that takes the shape of the face. No nose clip or metal parts. With adjustable elastic headbands.

Grey metal safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Adjustable nose pads and adjustable temples. The side protection in clear polycarbonate and riveted.

Lightweight and very comfortable face shield, 450 x 250 mm. With individually adjustable headband and forehead protection. Polycarbonate visor: good impact resistance, heat resistant up to 130 °C.

Works immediately after application: it normalizes perspiration and provides a fresh effect on the feet. The antiperspirant effect also limits irritation caused by excess sweat. The spray is very suitable for
treating socks and shoes. Protects the leather parts of the shoe.
Contains: flacon 100ml.

Fallline length 1.5 meters, diameter 10.5 mm. Kernmantel line, on one side a standard snap hook and on the other side scaffolding hook Maxitube.

Supple glove in unthoughened vulcanised rubber. Test voltage 5.000 volt, use voltage 1.000 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.

High shoe Toby S3 ESD HI in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 39-48.

Flame retardant, anti-static hi-vis rain jacket, SIOPOR® FR AST: 100% polyester fabric with 100% FR PU coating + AST; ± 250 g/m², 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Comfortable, Supple, High tear resistance, Taped seams, Different linings/fleeces can be zipped in Outside: Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 1 patched chest pocket, 2 patched pockets with gusset, 2 loops for badges, 1 Napoleon pocket, Round inset sleeves, Sleeve narrowing by touch and close fastening, Drawstring in hem, Back length 85 cm (L), Fixed flame retardant cotton lining, 1 inside pocket, Inside pocket for storage of hood, Zipper in back lining for placing logos. in line with: EN 531 A.B2.C1, EN ISO 14116 index 1, EN 1149-5, EN 13034, EN 343 3.3., EN 471 3.2.

Low shoe in white microfiber, with a synthetic 200J toecap. Fitted with a synthetic liner. Outsole in PU/PU. Sizes: 40-48.

Low shoe with brown water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in POROMAX: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD

Multifunctional glove for police task forces, secufrity guards, customs and defense. Feels like second skin due to the liquid repellent and flexible goat skin leather. The spandex nylon on the back of the hand gives high comfort and breathability. Cut and heat resistant, flameretardeant liner. Reinforcement of the crotch between index finger and thumb, Neopreen knuckle protection. Short cuff with cutout for watches. Sizes: 6-13.

Hi-vis ambulance parka with concealed zip, adjustable sleeves, 2 vertical front pockets, Napoleon pocket, radio pocket, radio loop, badge holder and round velcro zone badge on left sleeve. Including fixed hood. Quality outer fabric HIVIZ: 100% polyester + PU coating, 200 gr / m². Quality outer fabric Enamel: 100% Polyamide Lining: 100% PES mesh (fixed comfort lining) Yellow reflective prism bands Available colors: Fluo Yellow / enamel blue. Available sizes: XS-4XL. Conforms to: EN ISO 20471 Class 3, EN 343 4.4.

Long winter cap (shoulder length) in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides. Flame-retardant properties.

Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso.

Lamp with wide uniform beam that can be oriented (45°). Adjustable and washable elastic headband. Easy to wear on the head or directly mountable on a helmet. Large rotating selector button with different modes facilitates manipulation with gloves. Lumens in close-work modus: 30, in- motion modus: 40. Waterproof: 1m for 30min. Weight: 160g.

High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.

Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Length 41 cm, Sizes: 7-12.

J-Energy series. Low shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, pol yurethane insole with textile layer. Sizes: 35-48.

Good level of abrasion resistance <(>&<)> grip, but also high sensitivity in dry to slightly oily conditions.

Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The coated knuckles and the double coating in the palm provide excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X

The X-fit detect, including cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also re duces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate ba g. Colours: blue.

Coated polycarbonate screen as spare spart of hoods M-106, M-107,M-206, M-207, M-306, M-307, M-406, M-407. No PPE.

Classic fitover glasses with unlimited field of vision. Soft temples (DCT). Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material.

Seamless knitted cotton, No PPE 400gr/12pair