PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.

The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005

Replacement blades of 0.30mm for secutiry knife Secumax 350

Super-light safety helmet with micro peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.

Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 2500 volts, operating voltage of 500 volts. Length 36 cm, Sizes: 6-12.

3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch and anti-fog coating. Marking: 2C-1.2 1 FT KN.

Plug for connection USB cable of the HGAS-HTRAM CO2 detector..

Apron, Tyvek, antistatic, with chestpiece, two cords on the back to fasten, length 108 cm. Available color: white. Sizes: universal size.

Felt gloves with heat resistant nitrile coating. Maximum grip, perfect
abrasion and cut resistance, insulates to 180 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of
forms from injection moulding machines, vulcanising, calendering,
removing thermoplastics from moulds, handling hot moulded materials,
handling hot wooden sheets, removing sterilised products from
autoclaves.
glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line
with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.

ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >6 5 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with sta ndard threads. Class 2 gas filter: for max. concentration of 0.5 %.

T-shirt, 100% pre-shrunk ring spun cotton, 145 gr./m², single jersey, short sleeves, round collar. Available in: white, black, navy, red, natural, sand, beer brown, yellow, gold, apricots, orange, fuchsia, purple, burgundy, deep red, sky blue, azure, turquoise, atoll, royal blue, blue jeans, light blue navy , kelly green, bottle green, khaki, gray ash, sport gray, dark gray, real turquoise, used yellow, used raspberry, used violet, used wasabi, mint green, pistachio.

Spare blades for safety cutter Klever X-change (1018439)

Beige/brown low shoe S3 in full grain leather with steel toecap and synthetic antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.

Low shoe in water-repellent Perwanger leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable GEOX textile and active carbon activated antibacterial insole. Insole EVA+TPU. Sole: Nitrile, resistant to 300°C. Sizes: 35-48.

High shoe in microfiber/Cordura, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Scuffcap and BOA closing system. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.

Supple latex gloves with rolled cuff to prevent leakage in wet conditions.

Gloves with chemically resistant coating consisting of five layers, with hypo-allergenic lining. Can also be used as liner gloves. Extremely supple and ergonomically formed model based on patented seam technology. Offers protection against an exceptionally wide range of chemical products and solvents.

Flame retardant, anti-static hi-vis bodywarmer / Windproof / Breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Very comfortable / Supple / Good cold protection / / Stitched seams / Can be zipped into different jackets / Outside: Straight collar / Zip closure / 2 Patched pockets / Elastic drawstring in hem / Back length 75 cm (L) / Inside: Fixed quilted Flame retardant cotton lining / 1 / Inside pocket / Fabric: SIOPOR® FR AST: / 100% polyester / Fabric with / 100% FR PU coating + AST; ± 250 g / m² Colour: 278 hi-vis yellow / navy - 279 hi-vis orange / navy

Blue safety glasses, polyamide frame and polycarbonate lenses. Universal size. Suitable for protection against impact.

Goggle with panoramic view, fits over most corrective glasses. With clear polycarbonate lens with anti scratch and antifog coating. Equipped with an adjustable elastic strap, so the soft mount properly to fits the face. Weight: 86g.

Replacement knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.

The Stability Pro insole gives extra pronation and extra support to the inside of the foot. It provides optimal support to the heel and middle foot. Absorbs excessive perspiration moisture and promotes optimal fit due to lateral support for the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is also thermodynamic. Excess heat is removed, preventing blistering.

Safety helmet made of ABS, fitted with a 4-point textile suspension with wheel adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.

Raincoat FR/AS, 50% Polyamide, 50% Polyurethane, 170 gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zipper at the bottom storm flap with press stud fastening, adjustable sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343 3.1., EN ISO 14116 index 1, EN 1149-5.

Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.

Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides good grip. Impact-resistant backhand, 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat level 1. ESD approved and food safe. Oeko-Tex approved. Touchscreen. Sizes : 6-12.

Signa T-shirt Bird Eye Knit, 100% polyester, rond collar, weight 150 g/m².

Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.

The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.

Sturdy puncture resistant glove with 8 layers of metal fabric in the palm and 4 layers on the underside of the fingers and over the fingertips. The top of the fingers and knuckles are also reinforced.

The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.

Low shoe in waterresistant black nubuck leather, with an synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-47.

Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.

Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.

High shoe in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).

P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.

Face shield in clear polycarbonate, length 225 mm. Is compatible with S89 (1000806) and S89SR (1048119). For use in combination with helmet holder S54B/S54CE (1000790/1000789) and adapter 3711/S565 (100 1188/1001191) for mounting on Centurion safety helmets. Bracket S54, which you can see on the photo isn't included. Marking: 1 B 9 3.

Heat resistant (to 500 °C) safety helmet made of fibreglass reinforced polyester and fitted with 6-point textile suspension (51-63 cm) and black nylon sweatband. Weighs just 370 g and includes English accessory slot for face protection. With optional multifunctional face protection holder S57 for wide range of face shields.

Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.

Trouser in quilted nylon, use as insulating intermediate layer againstthe cold, zip closure. Available in: black. Sizes: S - XXL. Suitablefor: transport and distribution sector, agriculture and food industry. PPE category 1.

Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry str ap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coup ling.

Low shoe in black water repellent full grain leather, with a breathable textile lining. Fitted with a steel perforation sole and 200J toecap. The toecap has an extra protection layer. Antistatic insole with moisture control system for a comfortable feeling. Equipped with a shock absorbing insole from Uvex 3D Hydroflex. Outsole in PU 2 densities, specially shaped for better slip resistance. Sizes: 38-50.

Composite gloves with dielectric properties coated with natural latex, with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 2: operating voltage 17,000V, test voltage 20,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Sizes: 8-11. In line with EN 60903.

Bodywarmer, 65% polyester, 35% cotton, 190gr/m²

J-Energy series. Low shoe in waterresistant black nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.

Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Thumb and forefinger reinforced, double stitched, precurved fingers, the palm has a striking red color. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Touchscreen function on the forefinger. Sizes: 7-12. Conform: EN388:2016 3.X.4.2.D.P, EN407: X.1.X.X.X.X

Helmet hearing protector Sana 25for safety helmet CENTURION.

Budget-friendly glove with black PU coating, large size range.

Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: yellow/black.

Extra strong oil absorbing cloths. The perfect solution when durability or tear-resistance is required. Dimensions: 41cm x 51cm. Absorption capacity: 136 litres per 200 cloths.

High shoe in black water repellent full grain leather, with a warm fleece lining. Fitted with a steel perforation sole and 200J toecap. The toecap has an extra protection layer. Antistatic insole with moisture control system for a comfortable feeling. Equipped with a shock absorbing insole from Uvex 3D Hydroflex. Outsole in PU 2 densities, specially shaped for better slip resistance. Sizes: 38-50.

Safety knife with automatic blade retraction system. Designed for all
normal cutting jobs, especially box-slitting. The ergonomically squeeze
lever - made out of aluminium and a soft plastic component - provides
comfortable and non-slip handling. For use by right- and lefthanders.
Easy blade change: no extra tools required. With 2-edge/4-point blade
for extra economy. No PPE. Blades: 1016658

High shoe S3 in full grain leather with steel toecap and steel antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.

Screen carrier S55 Centurion for attachment to Contour face shields. This screen carrier includes Contour 30 mm adaptor for immediate attachment to Centurion helmet. Also suitable for addition of Centurion hearing protection (HELMET HEARING PROTECTION Scala SNR25 <(>&<)> HELMET HEARING PROTECTION Scala XI SNR30).

Hi-vis vest for ambulance workers with 2 patched front pockets, 1 right breast pocket, ID badge holder, radio loop and radio pocket. With zipper. Quality outer fabric: 100% polyester + PU coating, 200gr / m². Inner fabric: 100% PES fixed mesh comfort lining. Available color: fluo yellow / enamel blue. Yellow reflective prism bands. Available sizes: XS-4XL. Conforms to: EN ISO 20471 Class 2.

Low safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. Gore-Tex lining. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.

Polyamide safety helmet with integrated flip-up face shield (310 x 170 mm / 1.7 mm thick) made of polycarbonate, specially approved for short-circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (53-63 mm) w ith ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected parti cles, from grinders for example.

Chain mail glove made of 100% stainless steel. Adjustable closure around the wrist, also 100% stainless steel. Chain mail offers maximum protection against cutting risks. The glove is ambidextrous. A coloured identification tag on the wrist band indicates the size. Sizes: XXS (brown) / XS (green) / S (white) / M (red) / L (blue) / XL (yellow).

Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.

Red safety cutter with simple hook. Unique cardboard piercing shape prevents damage to carton contents.Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments Small ridges ensure a secure grip. Simple blades: 1021645 - dimensions knife: 1cm.

Thicker than our average latex glove. The fingertips are thicker than most standard latex gloves for ultimate protection. The enhanced fingertips with relief allow for a sure, reliable grip in demanding work environments, while increasing mobility for more productivity. Regardless of whether the tasks to be performed are moderate or heavy-duty or whether you are working in a dry or wet environment, your hands will always stay safe and dry.

Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F

Tunic, polyester / cotton, 195 g / m², height 80 cm without sleeves. Available sizes: 0-6. Available colors: Black, gray and sky blue.

Knitted cut resistant glove (long cuff 13 cm) with a new foam nitrile coating with touch screen functionality. The lining consists of high cut-resistant PE fibers, nylon and Spandex. The nitrile coating (on the palm) provides an extremely good grip on dry, but also on wet and oiled surfaces. Very comfortable and excellent protection against abrasion and with an extra reinforcement between thumb and index finger. Also provides protection against contact heat up to 100 ° C. Application: glass industry, metal assembly, injection molding of plastics. Available sizes: 7-12. Conforms to: EN388: 4.X.4.3.D and EN407: X.1.X.X.X.X.

Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.

P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.

Yellow, soft and comfortable 30 cm gloves in unlined flocked natural latex. Thickness 0.45 mm. Good chemical resistance. Suitable for food processing, agriculture, automotive assembly, chemical industry, pharmaceutical industry.

Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. A bsorption capacity: 18 litres.