BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti-fog coating.
Screw filter A2P3 in plastic housing with standard thread connection DIN EN148-1. Suitable for protection against organic gases and vapours, such as solvents with a boiling point higher than 65°C, solid and liquid particles of toxic substances, radioactive substances and micro-organisms such as bacteria and viruses. These RSG filters are designed to provide exceptionally low breathing resistance and high comfort for extended use. The standard threaded connection ensures that they are also compatible with RSG's T-air motor unit and all masks with a standard threaded connection. Compliant: EN14387
Baseball bumpcap with reduced peak (55mm) and ABS protection. Sizes: 52-65cm.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
These bib and brace trousers High Vis are part of the 20/20 Vision collection. The overall has many functional details to increase working comfort, such as a stretch part on the lower back and elastic parts on the shoulder panels for more freedom of movement. The various pockets offer enough storage space. Quality: 65% Polyester / 35% Cotton <(>&<)> 100% Nylon, Cordura, 280 g / m². Available sizes: 42-66 NL. Available colors: fluorescent yellow / navy, fluorescent red / navy and fluorescent orange / navy.
Ventilated forest trousers class 3 type A. To compensate for the higher weight and especially the higher heat accumulation associated with a higher protection class 3, these BasePro chainsaw pants are equipped with a ventilating mesh at the back of the legs. Zipper and 1 button closure; 2 deployed pockets; 1 patched back pocket; 1 patch pocket for pleoimeter and system for fixing the spark plug key; Elastic waist with belt loops and suspender loops with velcro (ref. 5SD4); Lumbar top with suspender loops; 3-needle stitching on the back to the cross. Quality: 65% PES / 35% cotton. Available sizes: XS-2XL. Available colors: Gray / black. Compliant with: EN 381-5: 1995 / Class 3 - 28 m / s design A and EN ISO 13688: 2013.
High shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Cottover hoody with ribbed cuffs and bottom hem. Inside of the hood in single jersey. Two front pockets. Quality: 80% organic Fairtrade cotton, 20% recycled polyester, 280 g / m². Available sizes: S-4XL.
This multinorm Dapro coverall is tough and comfortable. The coverall has an adjustable elastic at the waist for the perfect fit and a front closure with a welding proof flap construction. Available sizes: 44-70 NL. Available colors: Navy and royal blue
Safety helmet with integrated face shield (class 2) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap, neck and earflap protectio and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. Available sizes: 44-64, 84-120, 146-156 SCA. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Sweat band in black PU for helmet Pheos Alpine. Not certified seperatly as PPE.
10 pairs of Ear Cap 200 replacement earplugs.
Polycarbonate replacement visor, for the Iris II.
Automatic welding helmet suitable for most welding applications up to shade 12. This helmet has permanent protection against harmful IR and UV radiation regardless whether the filter is dark or light. This helmet has 5 dark shade number levels and 3 user selectable levels of detector sensitivity.
Full set with Speedglass Heavy duty welding helmet G5-01 with welding filter G5-01/03VC, adflo motor unit for high altitudes, and carrying bag. Not suitable for use in confined spaces. The large clear visor (104x170mm) is curved and provides excellent visibility in all directions. The welding filter's natural color technology provides a lighter, more detailed and colorful view, and switches on/off automatically. The airflow is adjustable on the face, visor or anywhere in between. The helmet's slim profile and ergonomic design makes it even lighter and easier to work in tight spaces.
High shoe in microfiber/cordura, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU (Wellmaxx), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Green FR coverall with elasticated wrists and hood suitable for use with helmets fitted with an elastic drawstring. Specially designed to provide extra protection against heat, flames and electrostatic hazards. The cotton in the fabric provides extra comfort while the PVC coating offers optimal chemical protection. Garment can be machine washed.
Metal inner cabinet for AED, green with alarm. Suitable for the following AEDs: Primedic HeartSave Y semi-automatic (1060424), Primedic HeartSave YA fully automatic (1060425), Zoll AED Plus semi-automatic (1060426), Zoll AED Plus fully automatic (1060427), Zoll AED 3 semi-automatic (1060428) and the Zoll AED 3 fully automatic (1060429).
Oval snap hook made of steel. Automatic closure of the locking mechanism provides extra safety. Opening: 18 mm. Resistance: 25 kN. W eight: 180g.
Comfortable, universally usable vented safety helmet, made of polyethylene, with 6-point plastic suspension. With rain channel, Euro pean 30 mm slot for attachment of hearing protection. Available in: white, yellow, blue, red and orange.
Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.
Eye protection required. Mandatory sign in self-adhesive polyester. Diameter: 200mm.
SP-225 opening valve (with sign).
xABEK2HGP3 screwfilter DIN 148 in synthetic capsulation. Protects against organic and inorganic gasses, sulphur dioxide, ammonia and high toxic dust-, haze- and smoke particles and mercury vapors. To combine with full mask with standard screw thread. Filter of class 2: until max. concentration of 0,5 %. Weight: 370 gr. Convenient for: processes with chemical risks. In line EN 141.
Hi-vis pull-over / Soft / Fabric / Grey fi nish at cuffs and collar / Elasticated reflective tape for improved comfort / Decorative seams / Outside: Straight collar / Hidden zip closure / Round inset sleeves / Knitted wind cuffsin sleeves / Back length 72 cm (L) / Fabric: 71% molleton polyester - 25% viscose - 4% elasthane; ± 280 g/m² Colour: 707 hi-vis orange/grey - 856 hi-vis yellow/grey
External fire resistent collar as spare spart of hoods M-406, M-407. No PPE.
Flexible glove in unthoughened vulcanised rubber. Test voltage 30.000 volt, use voltage 26.500 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.
The Stability Plus insole (sizes D and XD) provides optimum support to the heel and middle foot. With mid-foot support for a dropped front foot. Absorbs excessive perspiration moisture and promotes optimal fit due to lateral support for the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. Excess heat is removed, preventing blistering.
Manually retractable cutter in the form of a pen with replaceable ceramic blades. Rubber holder Double sided ceramic knife is specially designed to stay sharper and cause fewer accidents. Stays sharp for up to 10x longer than normal replacement blades. Orange version. Knife can be blocked. No PPE.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds (tested internally). With thumb hole and Velcro closure on upper arm.
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
Blue split leather glove, winter lined with Scotchgard leather reinforcements in the palm. Thumb and forefinger tips are touchscreen compatible. Protects against temperatures up to -30°C (slightly wet or dry environments). Sizes: 7-11.
Multinorm RWS trousers with hidden zipper, 2 inset side pockets, back pocket with flap, ruler pocket with flap, thigh pocket with flap, pre-shaped easily accessible knee pockets with opening at the top lockable with flap and Velcro and length seam. Quality: 50% / 49% / 1% polyester / cotton / carbon + DWR, 295 gr / m2. Available colors: Fluo orange. Available sizes: Size range 44-66. Complies with: EN 1149, EN 13034, EN ISO 11611 class 1, EN ISO 20471 class 1, EN ISO 11612, IEC 61482 class 1.
- Chemical protection - Triple PVC coating - Very finger sensitive - Seemless knitted cotton liner 13 gauge - Sizes: 8-11 - Length: 30cm - EN388:2016 4.1.2.1.X - EN ISO 374-1:2016 Type B: AJK - EN ISO 374-5:2016
The 60 degree package is complete with the sweater with hood. The American Fleece material keeps you warm during cold working days Quality: 70% Cotton / 30% Polyester, 280 g / m². Available sizes: XS-5XL. Available colors: Navy, Black, Dark gray, White.
Tunic, tencel / polyester, 195 gr./m², height 72 cm and short sleeves. Available sizes: 0-6. Available colors: Black / gray, gray / black and blue / black.
Low shoe in waterresistant brown full grain leather, with a metallic antiperforation sole and synthetic 200J toecap. Fitted with a b reathable, abrasion resistant liner in textile 3D. Outsole in PU double density, SRC antislip, oil and carburant resistant. Removable, Polyjal polyurethane insole with textile layer. Sizes: 38-47.
Light and allround safety knife, automatic blade retraction. Suitable for left- and right- handed people. With a non-slip soft grip on the slider, handle is made of glass fibre reinforced plastic, cutting depht : 17mm. Changing blades is easy and safe. Replacement blade: 65232 (1023415)
Safety vest consisting of 100% polyester with a velcro closure. Available in: fluorescent yellow and fluorescent orange. Sizes: XS-5XL.
Chainsaw trousers 1RB4: Front fly with zip closure - closing by 1 button; 2 inset pockets; Loops for belt; 1 patched pocket with zipper on the back; 1 patched pocket for measuring equipment and fixation of spark plug spanner; Elasticated waist with loops for belt and loops for velcro braces (ref. 5SD4). Quality:Water repellent 80% Polyester - 20% Cotton main fabric ± 200g/m². 100% polyester fabric with 100% PU coating; ± 195 g/m². mesh fabric (100% polyester ±140g/m2). Available sizes: S-3XL. Available colours: Gray/hi-vis orange.
Low shoe in Putek® PLUS (68% recycled polyester), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
Safety glasses made out of polycarbonate that also fit perfectly in combination with respiratory masks and do not fog up. he particularly snug fit is the result of our high-tech lens design and the flexible sealing lip. Rubberised side arms for a comfortable and non slip fit.
The new lightweight uvex pheos planet safety helmet is made of 30% biobased material and retains its shape even under lateral pressure – and meets the safety requirements in the construction and industrial sector. 6-point textile harness with rotary knob, the headband is made from 50% recycled helmet shells. Thanks to the efficient accessory system, the helmet can be quickly and easily adapted to individual needs, such as attaching uvex pheos earmuffs, helmet-mounted lamp or visor. Head circumference : 52-61 cm. PCF (Product Carbon Footprint) = 2 ,0kg CO².
High shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
Complete kit with SR 500 fan unit and protective helmet SR 570, 1 protective film, standard battery, battery charger SR513, belt SR508, 2 pieces of SR510 P3 particle filters, 2 filter adapters, 10 prefilters SR221, 2 prefilter holder, flow meter, plug kit, cleaning tissue and user instructions. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
The 3M™ Speedglas™ G5-03 Pro Welding Helmet is specially designed for the versatile welder. This helmet allows you to switch between welding and grinding work thanks to our new Tap functionality. With extensive adjustment options, including more control over how you view your weld pool and how you configure the helmet for extra protection against radiation, sparks and splashes, the G5-03 puts you in control of your protection. With 3M™ Speedglas™ Natural Color Technology, Variable Color Technology (with G5-01/03VC) and a tack welding mode (with G5-01/03TW).
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
FOOT PROTECTION / ACCESSORIES
Long hose of lightweight PU that connects between Versaflo or Jupiter motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo or Jupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length: 965 mm.
Replacement earplugs for X-cap (1015672 en 1032428). Sold in a bag of 5 pairs. Available in: lime yellow.
Retractable polycarbonate replacement visor, suitable for attachment toConcept Spectrum helmet.
The Peltor Clean HY100A is a hygienic solution... A replaceable, self-adhesive, absorbent paper coating that is applied to the sealing rings. For use in hot or dirty environments, or when the ear defenders are being used by different people. Pack of 100 sets. No PPE, only to be used in combination with Peltor earphones.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentration of 0.1%.
These unisex thermal trousers have long legs and are suitable for both men and women.
Safety helmet made of polyester resin with fibreglass reinforcement. Lightweight: +/- 312 g. Heat resistant to +/- 150 °C. textile headband. Vabon sweatband at front. Colours: white, blue, red, orange and yellow. Headband adjustable with ratchet.
Hi-vis shell jacket 4680, class 3. Concept: Trofta
Elbow band for work that results in long periods of elbow strain. This band spreads the pressure on the muscle attachment point over the larger muscle mass of the lower arm, which reduces development of pain. Prevents stress-related injuries of the arms. Sizes: S / M / L / XL.
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
Chemical overall made of PVC C2. These overalls have an attached hood with elastic and an extra high collar. The sleeves have an inner sleeve with elastic and an outer sleeve with Velcro. The pant legs have Velcro closures. The overall features a white area on the chest for application of numbering. The zipper has an extra high V-flap inside and an outer flap with Velcro. Available in: green. Sizes: S - XXXL.
Hazardous electrical voltage. Hazard warning sign in self-adhesive polyester. 1 pictogram. Dimensions: 200mm.
Leather holder for LIS eyewash solution.
