BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Thermal shirt with long sleeves in 100% polypropylene (130g/m²). Round neck, long sleeves, elongaited back, stitched seams, very breathable and moisture managing, thermally insulating, stain resistant, comfortable and ecologic. Available sizes: S-3XL. Available colours: anthracite grey. No PPE.
The full nitrile coating repels oil and liquids keeping hands dry and protected, whilst the new micropore nitrile palm coating ensures excellent grip in both dry and oily conditions. Conform EN3 88: 2016 level E cut resistance in such a fine touch, lightweight glove is unrivalled in the market place. Available sizes: 6-11.
High shoe in water-repellent suede leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, a brasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Dust mask, class P2 protects against solid and liquid particles of average toxicity. With exhalation valve for lighter breathing resistance and adjustable nose clip for optimized fit. Fitted with elastic headbands, ultrasound welded. NPF: 10.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
The Arbus cold storage bib and brace trousers protect you excellently against the cold with its fixed quilted lining. To stop the slightest breeze of wind, the legs can be narrowed and the hem adjusted. For your convenience, the braces come with a buckle, the knees are reinforced and the fly has a zipper. Exterior: Front fly with zipper, 2 inset pockets, Braces with buckle, Leg narrowing below by touch and close fastening, Knee reinforcement, Zip closure under flap with touch and close fastening at leg end, Adjustable hem at leg end with press studs. Inside: Fixed quilted lining. Fabric:100% polyamide; ± 185 g/m² + HV - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m². Color: Hi-vis yellow/navy.
Safety spectacle made out of PC. Has a anti-scratch and anti-fog coating.
A light jacket that offers you a very high level of protection, including ARC protection. This hi-vis Kaldvik rain jacket is made out of the new lightweight (280 g/m²) Siopor® Excell fabric. Different linings can be zipped in this soft and supple jacket. Furthermore, the Kaldvik has many practical features like the possibility of attaching a hood (available separately), narrowing the sleeve ends, 1 chest pocket, 2 inside pockets and a practical zipper grip for easily opening and closing the jacket. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam/aqua PU in the palm with longer cuff. Heat resistant up to 100°C contact heat. Sizes: 6-11.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Lab coat suitable for ESD environments: UPF 50+ fabric blocks 98% of UV radiation; 3 storage pockets; Phone pocket; Velcro adjustable cuffs for snug fit. Quality: 65% polyester, 34% cotton, 1% AST, 210g / m². Available sizes: XS-3XL. Available color: white, light blue and navy. Conforms to: EN 61340-5-1 (2016) and EN 1149 (2018).
This multinorm work jacket has a regular fit. The twill weave makes this jacket very strong. The multinorm jacket has an ergonomic fit and pleasant wearing comfort. Quality: 25% polyester and 1% carbon. Available colors: Navy. Available sizes: XS-5XL. Conforms to: EN 1149-5: 2018, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, IEC 61482-2: 2009.
Modern, fitted bicolor t-shirt with ribbed neck in four layers and elastane in the hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. The fabric is ring-spun and post-treated with an enzyme wash, making the material pre-shrunk and soft to the touch. Oeko-Tex 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 180 g/m². Available sizes: S-5XL. Available colors: BLUE/Navy, Navy/Blue, Black/Red, Black/Orange, Black/Grey and Gray/Black.
High shoe in nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
A warm and durable glove in our Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Welding glass in mineral glass. Dimensions: 51X108mm.
Flame retardant and antistatic poloshirt Bladel with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Round sleeves; Segmented reflective tape (2,5 cm); Back length 74 cm (L). Quality: 55% Protex + 33% cotton + 10% p-Ar + 2% AST; ± 230 g/m². Available sizes: S-3XL. Available colour: Navy.
High shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
Thin and comfortable shock-absorbing glove with cushioning Poron material in the palm and on the underside of the glove.
The Browguard with slip ratchet can be used to hold a wide range of face shields. Compatible face shields include the S580 (170 mm polycarbonate) / S590 (225 mm polycarbonate) / S591 (225 mm acetate) / S592 (225 mm acetate anti-fog) / S592AEA (225 mm acetate anti-fog <(>&<)> anti-arc) / S593 (225 mm green acetate). You can also choose from face shields S910 (150 mm polycarbonate) / S911 (150 mm acetate) / S912 (150 mm acetate anti-fog) which are suitable for attachment of an optional chin piece (S91C) to protect the entire face.
Flexible and close-fitting glove made of Guide HXFIBR material that offers cut protection and excellent dexterity. With nitrile coating on the palm for good grip, with high-visibility orange TPR/TPU impact protection on the back. Sizes: 6 to 12 Compliant with: EN388: 4X42DP, EN407: X1XXXXX, EN16350, EN 61340-5-1
High shoe, in rough environments, weather or no weather, on construction sites and slippery floors - the ANTONIO XXSG GTX Mid ESD S3S WR CI is at home wherever it can become critical. The EXTRAGUARD® upper material offers optimal protection against external influences thanks to its robust construction and water-repellent properties For a secure grip on a wide variety of surfaces, the PU/PU WELLMAXX SAFETY GRIP sole with certified anti-slip resistance SR. And the PU creep nose in the toe area extends the life of the boot. Waterproof, oil- and fuel-resistant, the safety boot defies even the most adverse conditions. Thanks to Laddergrip in the profile of the sole, it is also suitable for safe use on ladders. BASF's Infinergy® sole core absorbs shocks and vibrations and ensures comfortable wear throughout the working day. ESD capability and cold insulation complete this innovative foot protection. Maten: 36-48. Conform: EN ISO 20345:2022 S3S WR/FO/SR/SC/ LG/CI, type B
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 69 litres. Content: 1 ro ll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of MRO qualit y.
Hi-vis rain jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / 2 patched pockets / Raglan sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Classic: / 100% polyamide knitting with PU coating; ± 180 g / m² Colour: 3720A2FC1: FC1 fluo orange3720A2F01: FY1 fluo yellow
5-finger glove with palm in split leather and aluminized back. Wool lining. Kevlar seams. Glove with contact heat up to 100°C. Materials are resistant up to 250°C. Length 40 cm.
Goggle with large field of vision, vented indirectly. UV-resistant polycarbonate clear lens with antiscratch and antifog coating. Large adjustable headband with rotating anchor point, can be worn with most corrective glasses.
Eye/face wash with innovative eye-rinse system directed away from the nose and towards the outside of the face. Manual valve, chrome-plated Eye/face wash spray head made of green ABS plastic. 2.4m hose made of green PVC. Incl. wall bracket with hanging loop made of black ABS plastic. Water connection adapter: 1/2" male thread.
Bomber, 100% polyester, PU coated, 190g./m². Fleece in collar, ID pocket, hood in collar, reflective bands.
Spark catcher as accessory for motor unit Versaflo. No PPE.
The Stability Plus insole (sizes D and XD) provides optimum support to the heel and middle foot. With mid-foot support for a dropped front foot. Absorbs excessive perspiration moisture and promotes optimal fit due to lateral support for the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. Excess heat is removed, preventing blistering.
3M™ PELTOR™ G500 Forestry combination with Optime I earmuff and vizor 5C. A flexible and comfortable solution for face and heariong protection in forestry. Sizes: 54-62cm. Convenient for: forestry. In accordance with: EN 397/EN 166/EN 1731.
Single-walled storage cabinet for propane gas bottles, model LG.2845 Outdoor storage of pressurised gas cylinders, in accordance with current rules and legislation. Protection against weather. Robust cabinet, made of hot dip galvanised steel for high resistance to corrosion. Perforated design for maximum ventilation. Single door. Lockable against theft and unauthorised access by means of cross-grip handle with cylinder lock. With rear wall, base grille, grille shelf and warning sign. Dimensions W x D x H (mm): External: approx. 840 x 690 x 1500 Internal: approx. 830 x 660 x 1470 Storage Capacity: 4 x 33 kg or 10 x 11 kg or 18 x 5 kg
Boot S3 in black, heat resistant full grain leather. Toe cap in steel and synthetic anti-perforation sole. Lining in leather with heatresistant garments. Outer sole in Nitril STEINAU. Removable insole in Basic Grey. Sizes: 39 - 50.
Lamp for attachment to the helmet F1SF/XF by MSA. The lamp is extremely powerful and adjustable. Completely waterproof. Equipped with an ergonomic switch. The XPS helmet lamp is photoluminescent, so they can be recognized easily in the dark. Led laser spot for better penetration of smoke, fog and water. Weight with batteries: 180g.
Offers protection against electric arcs (class 2). Very lichtweight, flame retardant and antistatic rain jacket in 100% polyester with a highly breathable ePTFE membrane (Gore Pyrad™ technology)(215g/m²). Flameretardant lining in 50% aramid/50% viscose (115g/m²). Zip closure under flap with velcro, 2 front pockets with flap, chest pocket with flap, adjustable cuffs through velcro straps, elongated back, 2 loops for badge, vertical and horizontal reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Full face mask G1 with rubber headgear, successor to Ultra Elite mask, light, compact with wide field of vision on pc coated lens, and neckband. Improved air flow in the mask. Size medium, other sizes available on request, quick coupler, adjustable headgear, fully serviceable with voice membrane.
Safety helmet with integrated eye protection made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
High quality dispenser with cleaning tissues, microfibre B401 and cleaning spray B411.
Laces, black in polyester. Length: 150cm. No PPE.
Compact safety knife for routine cutting tasks. The metal-detectable plastic handle makes it easy to trace. It's concealed cutting edge easily copes with single-layerd card-board, film and packing tape and keeps your fingers safe. To order by 10 pieces. No PPE.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
High boot in waterresistant full grain leather. Fitted with a Sympatex liner. Outsole in 100% rubber, oil and carburant resistant. Removable, antibacterial polyurethane insole. Sizes: 35-50.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-3XL. Available colors: fluo yellow / navy. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 class 2 and EN 13758-2.
Hi-Vis T-Shirt with long sleeves and Cooldry yarns. This offers protection from the sun by a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Complies with: EN 20-471 class 3.
Bermuda Shift Covered with zipper, thigh pocket, 2 inset side pockets, D-ring, ruler pocket with tape measure pocket, adjustable elastic waist and 1 back pocket with snap button closure. Quality: 65% / 35% cotton / polyester, 2/1 twill weave, 290 gr / m². Available sizes: 44-66. Available colors: navy / gray, blue / gray, red / gray, black / gray and charcoal gray.
Men's Shift work trousers with concealed zip, thigh pocket with concealed snap closure, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, 1 back pocket with concealed snap closure, reflective piping, D-ring and extra crotch insert to prevent tearing. Quality: 65% / 35% cotton / polyester, 290 g / m2. Available sizes: 44-66. Available colors: Navy / gray, black / gray, corn blue / gray, red / gray and charcoal gray.
Raincoat suitable for food industry: • Oil and cold resistant. • Wind and waterproof. • Fixed hood with drawstring • Neck with press stud fastening • Elastic in the sleeves • Washable at 95 degrees Quality: 50% polyester, 50% polyurethane, 240 g / m². Available sizes: XS-4XL. Available colors: blue and white. In accordance with: EN 343 3.1, EN 13034 and EN 1186.
Stylish multinorm HI-VIS softshell with hood. Quality: 60% modacrylic, 38% polyester and 2% carbon, 350 gr / m². available sizes: XS-5XL. Available colors: Hi-vis yellow/navy. Compliant with: EN-1149-5, EN ISO 20471 class 2, EN ISO 11612, EN 13034, EN ISO 11611 and IEC 61482.
Hi-vis parka: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inside pockets • adjustable cuffs Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black. In accordance with: EN ISO 20471 class 3.
High visibility winter parka PW3: 5 pockets for more storage; Insulatex lining to reflect heat back into the body, ensuring maximum warmth and comfort; Removable lined hood; Quick-dry knit cuff; Zipped interior pocket; Zip closures under the armpits; Removable badge holder; The drawstring in the hem allows a snug and comfortable fit; Inside pocket. Quality: Industry 300D: 100% polyester, 300D Oxford weave with a stain resistant finish, 190g PU coating. Available sizes: S-4XL Available colors: fluo yellow / black and orange yellow / black. Complies with: EN ISO 20471 class 3 and EN 343 3: 1.
Low shoe S3 in synthetic microvelour with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35- 52.
Low shoe in black waterreistant full grain leather with synthetic toecap and synthetic antiperforation mid-sole. PU scuffcap. DryShield membrane. Sole in PU/PU. Sizes: D (36-48), XD (39-48).
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
High shoe in hydrofugated nubuck leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. BOA closing system. Has BIOMEX-PROTECTION-support for stabilizing the ankle. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
Safety helmet made out of PE. Has a 6-point polyethylene cradle (53-63cm). Available in: white, yellow, blue, red, orange.
Service pants in full stretch that provides maximum freedom of movement and comfort. Modern fit. Leg pockets on both sides with zip closure, phone pockets on both sides with Velcro closure. Folding rule pocket on the right side. Internal back pockets. Pre-bent knees. Internal pockets for knee protectors, adjustable in two height levels. Wider belt loop at the back to prevent pressure from belt. D-ring in front. Hidden attachment for holster pockets (ref. article 9042). Hidden button at front. Material:1: 65% polyester, 32% cotton, 3% EOL - 220 g/m2 Material 2: 91 ,5% nylon, 8,5% spandex Weight:250 g/m² Color comment:navy-58, grey-98, black-99 Gender:Men
Class 2 welding protection, elasticated cuffs for a secure fit, designed to be worn in a harsh working environment, designed with a comfortable fit, CE certified, this product is sold in pairs, UKCA marked. Outer fabric: split cowhide, thickness 1.3 mm Sizes: one size Standards: EN ISO 11611 Class 2 A1
White safety boot in PVC, fitted with a steel 200J toecap. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 10.
Comfortable half-mask in rubber, with unique sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Wide field of vision due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
