BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Cap with reinforced front, 6 panels, with ventilation holes, curved flap with contrast colored edge and adjustable metal clip closure. Quality: 100% cotton (drill, heavily combed), 350 g / m². Available sizes: Universal. Available colors: Black and navy.
Browguard with slip ratchet in polycarbonate Arc Pro to use in combination with the visors 225mm and 170mm for arc flash risks posed by electrical faults. This system is fully tested to protect up to 40cal/cm2.
Low shoe in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. BOA-closing system. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12).
Long Sleeve Polo 502.42: neck tape Rib knit collar Button closure with 2 buttons side seams Washable up to 40°C Quality: 100% cotton.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
High shoe in waterrepellant suede microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Raincoat Hydrosoft Selsey. Raincoat 85cm, zipper with press studs, adjustable elastic sleeves with press studs, 2 front pockets with flap, fixed hood, armpit ventilation, 170 grams (+/- 10gr). Available sizes: S-3XL Available colours: Royal blue, yellow, green, orange, navy
Sweatband in leather. Suitable for cradles of Peltor helmets. Not separately tested as PPE.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against organic vapours < MAC value thanks to active carbon layer. NPF: 4.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
The PROTAC amplifies all the ambient noise to a level that allows you to hear it better. It allows you to hear better and protects you during those moments when protection is necessary. Ideal for automatically blocking peak noise above 82 dB. Allows you to continue communicating normally. Settings are stored when removed. Automatic shut-down in the event of non-activity for 2 hours.
T-shirt from the Progression collection, enhanced visibility EN17353.
Gloves for all lengthy work activities involving chemicals, heat or cold. Neoprene on a double cotton liner. Temp-Tec 332 can be used for the manipulation of oiled, hot parts up to 250 °C. Available in: blue/black. Sizes: 8 / 9 / 10, length: 35.5 cm.
Supple latex gloves with rolled cuff to prevent leakage in wet conditions.
Apron 90 cm wide, 120 cm long, with reinforced front patch, duotex: 100% polyester fabric with PVC coating, 300 gr/m²
Helmet manufactured in vulcanised fiber, most favorite helmet for many welders due to it's weight and shape, small version of the Prota Shell, often used in smaller spaces, flip-up glass holder 108x51mm in size, weight: 365gr, easily adjustable headband, perfect comfort. Available: chinpiece in leather. Supplied with DIN 10 welding glass.
Unisex spectacles in leightweight blank polycarbonate. Superior field of vision and flexible temples for an easy combination with ear and face protection.
omfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools. Sizes: S/M - L/XL.
Safety spectacles with wide field of vision and gray polycarbonate lenses, treated with an anti-fog coating. With soft temples and s oft nose bridge with a non-slip effect.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Normal peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Ceramic rolling cutter for right- and lefthanded users. To avoid cutting yourself. Suitable for cutting hard plastic. Pas d'EPI.
Refill bottle containing 500 pairs of 3M ™ E-A-Rsoft ™ Yellow Neons ™ Earplugs. Advanced foam rubber formula for long-lasting wearability. Refill bottle with E-A-Rsoft ™ earplugs for the 3M ™ One Touch ™ Dispensers, allowing users easy access to earplugs. SNR: 36dB.
Fall-prevention device, 10 metre galvanised steel cable, with external shock absorber. Housing made of plastic. Serves as connection between anchor point and harness. For vertical (max 140kg) and horizontal (fall factor 1, max 100kg) use, and suitable to use with sharp edges. Weight: 6.6kg. Dimensions block: 39cm x 17.2cm, width 8.7cm Can be maintained.
Glove made of cut-resistant HDPE material with PU coating. Very finger sensitive. Sizes: 6-11.
Outer protective lens, extra scratch resistant, for welding helmet 9100. Not separately approved as PPE.
Ladies t-shirt in 95% cotton/5% spandex, 190 gr/m² single jersey. Full- fashioned model with extra stretch for better wearing comfort. Smooth and thin V-neck. Available sizes: XS-XL. Available colours: Lime, Pink, Red, White, Turquoise, Purple, Navy, Black. Stockarticle in black, XS-L.
Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.
Long john with fly in 100% polypropylene (130g/m²). Elasticated waist, stitched seams, good breathablity and moisture management, thermally insulating, stain resistant, comfortable and ecologic. Available sizes: S-3XL. Available colours: grey anthracite. No PPE.
High shoe in black fire-resistant full grain leather, fitted with a steel toecap and non-metallic anti-perforation midsole. Lining in leather heat resistant seams and a full, padded bellows tongue. Outsole in PU/Nitrile, SRC anti-slip resistant to fats and oils. Fitted with a PU scuff cap. Protection against molten iron and molten aluminium. Sizes: 38-50.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-1-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. Supplied with mesh visor (S59) and Baltic earmuffs. Colour: orange.
Low shoe in blakc leather. Fitted with a breathable liner in canvas. Outsole in rubber. Removable, polyurethane insole with textile layer. Sizes: 35 - 47. No PPE.
Safety glasses with a black frame with orange accents. Soft nose bridge and temples. Polycarbonate lenses for UV protection with a anti-fog coating (HydroShield).
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-5XL. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 3 and EN 13758-2.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-3XL. Available colors: fluo yellow / navy. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 class 2 and EN 13758-2.
Hi-Vis T-Shirt with long sleeves and Cooldry yarns. This offers protection from the sun by a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Complies with: EN 20-471 class 3.
High shoe S3 in waterresistant black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in SympaTex. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35-52.
Antistatic chemical-resistant gloves for protection against oil, paint, solvents and detergents in environments with a risk of electrostatic discharges.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C and formaldehyde, specifically for laboratories and hospitals. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dus t filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
T-shirt in single jersey, 145 gr./m², 100% preshrunk ringspun cotton. Comfortable design with long sleeves. Available in : white, black, navy, red, naturel, royal blue, bottle green, ash grey, sport grey, dark grey.
Sweater with full zip from the Progression collection, enhanced visibility EN17353.
JALCORAIL from the J-QUARTZ range from Jallatte is a low safety shoe, has a Shaft made of microfibre and TEX-TEC. iIs antistatic, has a sole made of polyurethane J-Quartz, equipped with the JAL'GRIP system and a safety toe cap made of composite Xetane B and perforation-resistant sole. EN ISO 20345:2022 A1:2024 From 35 to 48
Foldable mask, class P3, New Generationfor toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Improved Cool Flow Comfort Exhalation valve provides even lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. This mask does not contain components of rubber latex and PVC. NPF: 50.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Face screen in blank polycarbonate, thickness: 1,5mmm, lenght 225mm. Possible combination with the Anti Electric Arc Browguard S89CAEA (1014252) or the face screen carrier S57CEHH (1000792). Packaging: 10 pieces.
Head lamp Peli, comes with two main bands, one of substance and one of rubber. Explosion-safe ATEX Zone 0, 3 LEDs and comes with 3 AAA (LR3) alkaline batteries.
emporary, horizontal safety line made of polyester webbing with a maximum length of 20 metres. Safety line can be stretched between twopoints with line tensioner. Includes two carabiners and anchor points inthe webbing, one metre from the ends, for attachment to all sorts of constructions. Sold in handy storage bag. May be used for fall protection for two people.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%. processes with chemical risks.
Goggle with large field of vision, vented indirectly. UV-resistant acetate clear lens with antiscratch and antifog coating. Large adjustable headband with rotating anchor point, can be worn with most corrective glasses.
Black life-jacket (automatic inflation) with 3D collar and soft outer cover. The collar is held on the collar band on the back for extra comfort at the neck. The jacket is extremely well finished with piping. The jacket has a minimum buoyancy of 165N. Available in different versions, such as automatic or manual. Standard with leg strap
Dispenser for EAR earplugs (excluded) for one-time use (refill: 1001007, 1013077). Simple to operate with a simple twisting action. Made of 100% recyclable material.
High shoe in waterresistant synthetic textile (100% leatherfree), with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane semi-orthopedic insole with textile layer. Sizes: 36-48.
BasePro chainsaw jacket: The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work. The BasePro chainsaw jackets, which are the most economic pair of SIP Protection jackets of the range, still provide the comfort you want, the protection you need and the quality you expect from SIP Protection. Quality: Water repellent 65% Polyester - 35% cotton outer fabric, 210 g/m2. Available sizes: S-4XL. Available colours: Orange/grey.
Suspension I/79GD-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ben and Bop. Not separately certified as PPE.
Ergonomically designed knee pads providing durability, comfort and protection. This knee pad fits all Portwest garments and does not hinder the wearer in any way when walking. In accordance with: EN 14404: 2004 + A1: 2010 Type 2.
Disinfectant spray for the skin. User instructions: Spray directly on the area to be treated, then dab using a compress. Repeat this process every 6 hours if necessary. Immediate effect. Composition: Aqua, chlorhexidine digluconate (Cas No. 18472-510) 0.2%.
Premium grain goatskin leather combined with cut and impact protection glove. TPR impact protection on top of the hand and the full lenght of the fingers. Additional palm leather layer enhances cut resistance. Reinforced seams on the index finger and base of thumb. Secure cuff closure with TPR tab closure. Sizes: 8-13.
Flame retardant coverall in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the overall flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The coverall has increased visibility. Concealed front zip. Two walkie-talkie loops. Chest pockets with flap, right pocket with tool loops and concealed key ring for ID card holder. Side pockets with flap. Height-adjustable knee pockets. Back pockets with flap. Ruler pocket with flap. Adjustable cuffs with press studs. Elastic at the waist. Contrast stitching. Quality: Cantex Stretch, 365 g/m² + Cantex Weld, 365 g/m². Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1B1C1E3F1, EN ISO 11611 A1 Class 2, EN 1149-5, IEC 61482-2 Class 1 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 13034 type PB [6 ].
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Chemical resistant glove with cut protection for precision and medium duty work with cut risk. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 15gg para-aramid lining. Sizes: 7-12. Complies with: EN388:2016 4.X.4.1.C, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 Virus.
High shoe in Putek® PLUS (68% recycled polyester), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
Terylene suspension for Concept helmet with slip adjustment.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 10.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colour: blue.
Lanyard, 2 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Maximum user weight: 140kg
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands with closure. The new IonicAir filter technology reduces breathing resistance by 30%.
Level F cut resistance. Protects from glass, blades and abrasions. Protection against contact heat up to 100°C. Crinkle latex grip offers excellent grip. Reinforced thumb crotch for extra protection and durability. Superior strength and comfort. Reflective label for improved visibility .Breathable seamless liner 13 gauge liner for a perfect fit. Sizes 6(XS)-11(XXL). Conform: EN388:2016 3.X.4.4.F, EN407: X.1.X.X.X.X
