BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.
Low shoe in black full grain leather with steel toecap and anti-perforation sole. Sole in PU/Nitril (VIBRAM), and insole in leather, with antibacterial treatment. This shoe is the extra wide XXD version of the Alaska. Sizes: 39-47. All materials are re-usable and shoe is fully dismantable.
Low shoe in blakc leather. Fitted with a breathable liner in canvas. Outsole in rubber. Removable, polyurethane insole with textile layer. Sizes: 35 - 47. No PPE.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-5XL. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 3 and EN 13758-2.
100% acrylic beanie soft touch with lapels. Thinsulate ™ lining. Available sizes: Universal. Available colors: Navy, black and gray.
Atex Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Parka with hidden zipper with hidden snaps, 2 front pockets with flap, 2 inset chest pockets with right chest pocket with D-ring for badge holder, detachable hood with drawstring, zip-in lining is available separately, escape mask loop, cuffs with Velcro, extended back, reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: S-3XL. Available colors: corn blue / navy, gray / blue, black / gray and gray / red. Complies with: EN 1149-5, EN 13034 type 6, EN 343 3: 2, IEC 61482 class 2, EN ISO 11611 class 1 and EN ISO 11612 A1A2.B1.C1.E2.F1.
Replacement battery for gas detector BW Solo
High shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Refill can containing 400 pairs of memory foam, conically shaped earplugs for the HL400 dispenser (1048893). The skin friendly earplugs protect against general noise.
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
With a contemporary fit, a slim neck collar and a natural stretch, this T-shirt is a versatile and comfortable choice for the workplace. The shirt is made of 100% combed, ring-spun cotton, which contributes to the good quality and neat appearance. Quality: 100% combed cotton, single jersey. Available colors: Red, orange, royal blue, navy, ink, black, white, lime, purple, turquoise, dark gray, army green. Available sizes: XS - 5XL.
Cleaning spray (250ml). Cleans the glasses quick and without stripes. No PPE.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
The Frovik is a bomber jacket which you can wear in many situations. The fluorescent colour and segmented striping will keep you safe in any light conditions. The Siopor Excell fabric protects you against the rain and against many industrial hazards including the thermal risks of an electrical flashover. A surplus is the light weight of the fabric. The bomber jacket comes with a flame retardant fleece lining (index 3) which can also be removed. The wind is kept out by the elastic wrist bands that can be narrowed and by the standing collar to which a hood can be attached. The separately available hood can be stored in the special purpose inside pocket. Class 2 ARC protection can be obtained by combining the bomber jacket and the fleece lining.Complies with: IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034, EN ISO 20471, EN 343, EN 61482-2, EN ISO 14116 and EN 14058. Available sizes: S-3XL Available colours: Yellow-Navy, Orange-Navy
Low shoe in split leather/mesh. Equipped with an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable 3D polyester and breathable insole. Sole in PU/PU. Sizes: 35-42.
Service pant in full stretch that provides maximum freedom of movement. Modern, tight fit. Sewn-in, adjustable, stretch in the waistband for comfort, also rubberized to keep the pant on place.
Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ea r canal for improved comfort. Available in a disposable box containing 200 pairs, each pair in a separate bag.
Large particle pre-filter, for installation between dust filter and spark arrestor in Adflo motor unit. Prevents rapid clogging of g as and dust filters, which increases the service life. Very useful for work in very dusty environments.
Standard Li-ion battery for adflo motor unit from Speed Glass.
Replacement hood for hood S-655.
Low shoe in nubuck leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D/XD, 39-48.
Heated body warmer. Battery must be ordered separately.
Low shoe in SAFETY KNIT textile with FUSETEC elements, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
Comfortable and lightweight plastic safety glasses with patented adjustable nose bridge, of which the nose bridge can be put in 3 po sitions in order to achieve the best possible fit.
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
Cold insulating glove with foam insulation and PVC coating. The roughened finish provides excellent abrasion resistance. This fluore scent, supple and ergonomically shaped model features a protective cap and is completely impervious to liquids. It is also dirty, fat and water repellent. Ideal in the chemical and petroleum industry and for work in cold stores, ports, public services or other env ironments where protection against cold is required. Anitstatic. Length: 27.5 cm.
Coverall, laminated, for limited chemical use, composed of various composite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version has stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees.
Escape mask (halfface) with ABEKP2 filter. Protects against organic and inorganic gases, solvents, sulphur dioxide, acidic gases, am monia, organic ammonia derivatives and toxic dust, mist and smoke particles. Easy to put on. Working time: at least 15 minutes. Pack aged in plastic box for belt or wall attachment. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosp here. Shelf life: four years.
UV-resistant polyethylene chain to block off danger zones. Can be used in combination with marker poles. Weight: 2.7 kg per 25 m. Le ngth: 25 m. Colour: red/white.
Lightweight and very comfortable face shield, 450 x 200 mm. With individually adjustable headband and forehead protection. Cellulose acetate visor: scratch and chemical resistant, but is not suitable for use at high temperatures or as protection against high impact. Suitable for: chemical and petrochemical industries.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point > 65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentrati on of 0.1%.
Arm protector, polyethylene, thickness 20 micron, length 40cm. Package containing 100 pieces. Available in: blue. Sizes: universal size. hygiene, transport and distribution sector. No PPE.
Disposable 100% nitrile gloves with beaded cuff. Embossed fingertips for extra grip. Fully powder-free and free of natural rubber, waxes, silicones, or plasticizers. Touch N Tuff offers 3 x more puncture resistant than vinyl and natural latex. Suitable for laboratory work, chemical industry, emergency services, electronics and other precision assembly work. Colors: blue. Sizes: 6.5 to 7/7.5 to 8/8.5 to 9/9.5 to 10. Length: 300mm, thickness: 0,10mm.
Hi-vis rain jacket / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Very comfortable / Supple / Very light / Taped seams / Outside: Fixed hood in collar / Zip closure under flap with press studs / 2 patched pockets / Round inset sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Inside: Fixed lining: mesh in body and polyamide in sleeves / Fabric: SIOPOR® Regular: / 100% polyester / Fabric (plain weave) with / 100% PU coating; ± 155 g / m² Colour: FC1 hi-vis orange - FY1 hi-vis yellow - FR1 hi-vis red
Seamless waterproof nylon glove with thin double nitrile coating. Good dexterity, grip and elasticity because of lining. Length: 30cm. Antistatic, latex and silicone free, food approved .
Safe Step avoids hang trauma after fall. No PPE.
Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and suspension with wheel adjustment. Helmet with slot for P3E or P3K adapter. Tested: molten splash metal (MM) and low temperature (-30°C).
Jacket, Proban, 78% cotton 20% polyester 2% P140, 330 gr/m². ATPV: 37 cal/cm² (double layer), ATPV: 13.8 cal/cm² (single layer)
Hard plastic (grivory) safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Blades: 1016658
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Foreseen with a mirror polycarbonate lens with a antivapor and anti scratch coating.
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zip under storm flap with press stud fastening, sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343.
Low-cut shoe made of grey velours, fitted with a 200J toecap. With liner in Climazone in antiperspirant textile and comfortable insole providing extra protection against mildew and heat. Sole made of PUR (PU/PU): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile.
Yellow first aid kit (bilingual) with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, well organised and more accurate! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape, temperature, dust and water resistant, maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in accordance with ARAB guidelines (Multi), Resc-Q-Assist Colour System, NL and FR colour guide, wall holder, content table in NL and FR. Version: Multi.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Refill of 300 pairs of comfortable disposable earplugs, loose in refill box. Wearing time: maximum 1 working day. Colour: Lime yellow. Suitable for: General industrial applications.
Safety helmet with integrated eye protection made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Laces, black in polyester. Length: 125cm. No PPE.
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Havep Multi Shield multinorm work trousers model 80308
Sporty lightweight (34 gr) goggles with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety, standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With textile headband. Includes Supravision extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
High shoe in hydrofugated textile, with a synthetic antiperforation sole and steel 200J toecap with TPU scuffcap. Fitted with a Gore-Tex liner. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Softshell vest without sleeves: • two side pockets with zippers; • chest pocket with zipper; • two inside pockets; • hidden button band with chin guard on top; • adjustable waist. Quality: 96% polyester, 4% spandex. Available sizes: XS - 5XL. Available colors: black, navy, dark gray, green, sky blue and red.
Full zip hoodie: • sweater and jacket at the same time • fur on the inside for extra warmth • hood with drawstring • large front pockets • knitted, elastic waistband at the bottom hem • reflective piping on the front and back Quality: 65% cotton, 35% polyester | inner side: 100% polyester, 430 g/m². Available sizes: XS-4XL. Available colors: Black, red, gray and navy.
Kernmantel restraint lanyard 1.5m with a twist lock karbiner and a steel GO55 Scaffold hook. Only suitable for positioning.
Dark grey hearing protector with HiViz red element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Exterior: Stand-up collar, concealed snap button closure under facing 2 patch chest pockets with flaps with hidden press studs, 2 patch side pockets with flaps with hidden press studs, 2 loops for gas detectors, round sleeves, sleeve narrowing by means of a button. press studs, flame retardant reflective tape (50 mm). Inside: 1 inner pocket, identification label. Material: Sio-Safe Essential Eco: 50% cotton + 30% Tencel = 19% recycled polyester + 1% AST. +- 320 g/m. Complies with: EN 61482-2 ELIM 9.7 cal/cm² - ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 11611 Class 1 A1 A2, EN 1149-5, EN 13034 (Type PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 44 - 64
The first GS-certified safety knife with a safety-laminated blade and an adjustable cutting depth of up to 10mm. The fiberglass-reinforced handle is made of over 60% recycled plastic.
Banded earplugs, lightweight and reusables, ideal for visitors. In line: EN 352-2 (SNR23).
Green plastic hearing protector with neck band made of combination of plastic and stainless steel. Allows simultaneous use of helmet s or other head wear. Universal size.
Light yellow hearing protector for attachment to helmet, made of combination of plastic and stainless steel. Very light model with e rgonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Compact professional headlamp with adjustable light suitable for explosive environments. Rechargeable battery is worn on the back of the head for ergonmic weight distribution. Battery can also be attached to clothing or equipment with an extension cable. Lamp is resistant to dust and water: IP68. Equipped with emergency lighting if the battery should run down during work. Charging time: 210 minutes. Very suitable as a mine light.
