BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Low shoe in waterresistant brown full grain leather, with a metallic antiperforation sole and synthetic 200J toecap. Fitted with a b reathable, abrasion resistant liner in textile 3D. Outsole in PU double density, SRC antislip, oil and carburant resistant. Removable, Polyjal polyurethane insole with textile layer. Sizes: 38-47.
Flame retardant trousers Barcus with arc protection: Front fly with zip closure; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket; 1 gusset pocket; Elasticated waist; Knee pockets; Waistband with loops for belt. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available colors: Blue/fluo yellow. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Electric Arc hood in softshell fabric with high arc protection. Helmet - Robust helmet with durable shell construction and chin strap. Cooling vents for improved air circulation and comfort. RX0018 - Highly transparent 3Phase® Arc Flash protection lift-front visor. Combined set with Electric Arc hood 9179, integrated lift-front visor RX0018 and helmet with chin strap. Available sizes: Universal. Available colours: Navy.
This multinorm work jacket has a regular fit. The twill weave makes this jacket very strong. The multinorm jacket has an ergonomic fit and pleasant wearing comfort. Quality: 25% polyester and 1% carbon. Available colors: Navy. Available sizes: XS-5XL. Conforms to: EN 1149-5: 2018, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, IEC 61482-2: 2009.
Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Flame retardant work jacket in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the work jacket flexibility and offers freedom of movement and high comfort, while Cantex Weld at the front offers extra high protection against welding and grinding spatter. The work jacket has increased visibility. Concealed front zip with press studs. Extended back. Two walkie-talkie loops. Chest pockets with flaps, right with tool loops and concealed key ring for the ID card holder. Left vertical chest pocket with zipper. Spacious slit pockets with flap. Cuffs adjustable with press studs. inner pocket. Contrast stitching. Quality: Cantex Weld, 365 gsm. Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
Polyurethane hose that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Length: 525 - 850 mm. Hose adaptable in length. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick- connect coupling.
Adapter 3712 for helmets with standard 30 mm slot (1100, 1125, NEXUS). Not for Concept helmets of Centurion.
Super-light safety helmet with short peak, made of strong polypropylene. With 4-point textile suspension (51-63cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: yellow/black.
Double Lanyard, 1.8 metre length, consisting of elastic strap with integrated shock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Double Lanyard to allow continuous protection, even when switching be tween two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
Pair of conically shaped earplugs, made of skin friendly memory foam, for protection against general noise. Fitted with neck cord an d sold in sets of 100 individually bagged pairs. Sizes: S and L. In line with EN 352-2 (SNR 33).
Lightweight and very comfortable face shield, 450 x 250 mm. With individually adjustable headband and forehead protection. Polycarbonate visor: good impact resistance, heat resistant up to 130 °C. Suitable for: general industrial applications.
Apron 90 cm wide, 120 cm long, with reinforced front patch, duotex: 100% polyester fabric with PVC coating, 300 gr/m²
Reversible bib & brace trousers / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Elastic braces with buckles on front and back / Legs adjustable by press studs / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6 with PU coating; ± 170 g / m² Colour: W02 white
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
Refill for first aid panel: Refill pack of 6444 textile plasters. 1 Refill pack contains 6 X 40 plasters.
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
Hat, 100% cotton, 350 gsm, 6-panels, Eyelets, Tonal button adjustable clip fastening, Low stylish profile.
Burnshield responder kit to be used on first, second, third degree burns · Ideal for ambulance, fire, police, emergency responders and first aiders. Content and dimensions: Burnshield® Responder Kit: 8 Burnshield ® compresses 10 x 10cm 3 Burnshield® pads 20 x 20 cm 2 Burnshield® pads of 60 x 40 cm 3 Burnshield® pads 2.5 x 0.5 cm 2 Burnshield® pads 1m x 5cm 3 Burnshield® gel 125 ml 1 Roll of adhesive plasters 2.4 cm x 5 m 2 Rolls bandages 2 Rolls Soft foam bandage 1 Pair scissors 2 Pairs gloves 1 Rescue Blanket 2 m x 1 m Packed in a bag with the dimensions 33 x 25 x 14 cm
High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.
Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.
High shoe in waterresistant black full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.
High shoe in waterresistant synthetic textile (100% leatherfree), with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane semi-orthopedic insole with textile layer. Sizes: 36-48.
Long john with fly in 100% polypropylene (130g/m²). Elasticated waist, stitched seams, good breathablity and moisture management, thermally insulating, stain resistant, comfortable and ecologic. Available sizes: S-3XL. Available colours: grey anthracite. No PPE.
Dual toolbelt holster with retractors. No PPE.
Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Semi- orthopedic insole which is conform to ESD. Sizes: 38-48.
Safety glasses in clear polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (40g). Foreseen of a an adjustable nose bridge and Geco-injected temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging. Fits over most prescription glasses.
Sandal in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Comfortable and sturdy stretch work trousers with reflection details, knee pockets and extra reflection piping. Quality: 65% polyester / 35% cotton. Available sizes: 42-66. Available colors: navy, black, and dark gray.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Comfortable safety boot made of Neotane with steel 200J toecap. Fitted with removable, insulating insole and textile interior. Perfect insulation from heat and cold. Sizes: 36-48.
Multirisk rain trousers with igh level of protection but still light in weight. The Hovi hi-vis trousers are a waterproof rain trousers with ARC protection in a light and improved Siopor® Excell fabric. The 3-layered fabric protects excellently against foul weather, heat, flames, welding sparks and the risks of an electrical flashover. These high-visibility trousers are soft and supple, making them a pleasure to wear in potentially hazardous working environments. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m²; 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Available colours: Fluo orange/navy and fluo yellow/navy.
Version with pointed blade, maximum cutting depth: 19 mm. Lightweight all-purpose safety knife made from recycled plastic. Ambidextrous slider for extending the blade. Automatic blade retraction. Easy blade replacement. Replacment blade: 1016008
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Welding glass in mineral glass. Dimensions: 51X108mm.
Glasses with clear polycarbonate duo-lens, equipped with supravision coating. With clip-in frame. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: blue/charcoal.
Safety glasses made out of polycarbonate that also fit perfectly in combination with respiratory masks and do not fog up. he particularly snug fit is the result of our high-tech lens design and the flexible sealing lip. Rubberised side arms for a comfortable and non slip fit.
The 3M™ Speedglas™ G5-03 Pro Welding Helmet is specially designed for the versatile welder. This helmet allows you to switch between welding and grinding work thanks to our new Tap functionality. With extensive adjustment options, including more control over how you view your weld pool and how you configure the helmet for extra protection against radiation, sparks and splashes, the G5-03 puts you in control of your protection. With 3M™ Speedglas™ Natural Color Technology, Variable Color Technology (with G5-01/03VC) and a tack welding mode (with G5-01/03TW).
Filter holder for use in combination with dust filter holder 501 for direct connection of dust filters 5911, 5925 and 5935 to 3M hal f and full face masks.
Easy-to-attach 2-point leather chin strap. Available in: black.
All-round white glove for catering operations. Mechanically strong, heat resistant and impervious for ovens, dishwashers, autoclaves, cooking activities. Nitrile glove of 45 cm with a cut resistant insert and brushed finish on the fingers. Sizes: 7 (outer size:9), 9 (outerr size: 11) and 10 (outer size 12).
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for better comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surface. Sizes: universal size.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 5PPM and 10PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads.
Automatic welding helmet suitable for most welding applications up to shade 12. This helmet has permanent protection against harmful IR and UV radiation regardless whether the filter is dark or light. This helmet has 3 dark shade number levels and 3 user selectable levels of detector sensitivity.
Charger with power supply as accessory for motor unit Versaflo TR-300, can be expanded with multi-charging station TR-342-3 to charge up to 10 batteries.
Dispenser for X-fit and Com4-fit refills (Art: 1034114/1034115), easy to use and fits conveniently on any wall. You can accurately dispense the required number of earplugs with the twist of a knob: 1 click = 1 earplug. Transparent housing allows you to easily see how many earplugs are still available in the dispenser. Includes a tray to catch the falling earplugs. Available individually, empty, with tray for falling earplugs. Colour: blue/transparent.
Bump cap made of polyethylene with plastic headband and sweatband. Colours: white, yellow, blue, red, green, orange.
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
Compresses for very rapid first aid for burns in the acute burning phase. 10 x 10 cm. Three year shelf life.
PPE with CE - mark of class 3.
Reusable multi-gas detector with shockproof housing Simultaneously detects H2S, CO, O2, and %LEL. Standard with built-in pump, data logging, and event logging. Semi-annual calibration required. Battery life: Approximately 13 hours. Includes rechargeable battery and wall charger. Includes a 1m calibration hose with quick coupling, 3m sampling hose with particulate filter and quick coupling, and a set of spare pump filters (5 particulate filters and 5 hydrophobic filters). Concentration is always visible on the LCD display. STEL/TWA exposure records. With a filtered LEL sensor, calibrated to methane as standard. Alarm values: %LEL 10%-20%, H2S 10-15ppm, O2 19.5%-23.5%, CO 20-100ppm. Compliant with: 89/336/CEE and Ex ia IIC T4. IP class 65/67 and ATEX approved.
High capacity battery as spare spart for motor unit Versaflo. 10 to 12 hours with new filter. No PPE.
Disposable safety cutter for left- and righthanded. For opening different packages. The blade is not replaceable. In this way, the knife can not get lost. Again, the safety technique of recoil knife is applied. The knife fits in any pocket. No PPE.
Disposable knife/scraper, steady and functional. Suitable for the cutting of carton, paper and foil up to 6mm.
Spray for the cleaning and rinsing dust and dirt from eyes and wounds. The spray provides a gentle stream of moisture and has a total rinsing time of 5 minutes. The spray can be used several times and is sterile to the last drop. Contains 150ml sterile saline solution 0.9%NaCl. Environmentally friendly propellant. Fits in the first-aid station.
Low shoe in water repellent velour leather, with a synthetic anti- perforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole Crazy+ in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
30m floating rope for lifebuoy.
High visibility gilet in 100% polyester (125g/m²). Horizontal and vertical reflective striping, velcro closure.
Baseball bumpcap with reduced peak (55mm) and ABS protection. Sizes: 52-65cm.
