BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 250 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
AB2E1 gasfilter in plastic housing for Moldex masks series 7000 and 9000for protection agains inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Compact safety knife for routine cutting tasks. The metal-detectable plastic handle makes it easy to trace. It's concealed cutting edge easily copes with single-layerd card-board, film and packing tape and keeps your fingers safe. To order by 10 pieces. No PPE.
Compresses for very rapid first aid for burns in the acute burning phase. 10 x 10 cm. Three year shelf life.
ABE1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic and inorganic gases and vapors with boiling point >65°C and sulfur dioxide. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
First aid box, waterproof and shock resistant, made of ABS synthetic material, specifically designed for ISS. Domino size of 260 x 170 x 88 mm. Suitable for all food services.
Sturdy blue single use glove in 100% nitrile with rolled edge. Completely powder-free and free of natural rubber. With textured fing ers. Food suitable. Suitable for medical examination. Sustainable packaging.
Glove in roughened interlock with nitrile coating (35 cm long). Smooth Solknit offers excellent abrasion resistance and a perfect grip on wet and oiled materials. It also protects against a wide range of chemicals, detergents and solvents. Extremely suitable for the chemical industry, the paint and petroleum sector, the transportation and treatment of hazardous substances. Food approved, antistatic and silicone free.
Arm protector, polyethylene, thickness 20 micron, length 40cm. Package containing 100 pieces. Available in: blue. Sizes: universal size. hygiene, transport and distribution sector. No PPE.
ABEK1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
The Nibas is our cold storage bomber jacket with quilted lining that protects you to temperatures of -40 °C. The inner collar is finished in fleece. The sleeves are handy with knitted cuffs, a practical thumb hole and touch and close sleeve narrowing. For your comfort, the elastic waist can be narrowed using press studs on the sides. The shoulders are reinforced so that this bomber jacket is a durable and practical protective garment. Inside: Fleece inside collar, Provided for hood (hood available separately), Front zip closure under flap, 1 patched chest pocket with flap, 2 inset pockets with flap, 1 sleeve pocket + pen pocket, Round sleeves, Sleeve narrowing by touch and close fastening, Shoulder reinforcement, Elasticated waist and narrowing by press studs at the sides of the waist, Elongated back tail, Back length 80 cm (L) Fabric: 100% polyamide; ± 185 g/m² + hi-vis - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m² Color: fluo yellow / navy. Compliant with: EN 342 + EN ISO 13688 : 2013
The safety shoe features a fibreglass toe cap and a flexible FAP® midsole. In addition, the shoe offers TPU protection in the heel and toe area. The upper consists of durable microfibre with breathable Sandwich Mesh, while the lining is made of BreathActive functional lining. The footbed features evercushion® technology. The sole of the shoe, the MOTION PWR, is heat-resistant up to 300°C and has a slip-resistant rubber outsole with a PWR.FOAM midsole for excellent cushioning, energy return and stability. Suitable for low-voltage electrical work.
P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Biodegradable single use glove, powder free.
These foam rubber earplugs are fitted with a cord and a non-ferrous metal component. This model is 100% detectable and is highly visible thanks to its blue/orange colour. The foam conforms perfectly to the wearer's ear canal. These earplugs are primarily recommended for the food industry. industrial applications.
Trouser in quilted nylon, use as insulating intermediate layer againstthe cold, zip closure. Available in: black. Sizes: S - XXL. Suitablefor: transport and distribution sector, agriculture and food industry. PPE category 1.
Apron 90 cm wide, 120 cm long, with reinforced front patch, duotex: 100% polyester fabric with PVC coating, 300 gr/m²
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti- fog coating.
Thermal insulating glove with PVC dots on palm. Glove made of Thermalite fibres.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Reversible bib & brace trousers / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Elastic braces with buckles on front and back / Legs adjustable by press studs / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6 with PU coating; ± 170 g / m² Colour: W02 white
Protective cold storage jacket up to -40 ° C! The inner collar was finished in fleece and the extended back, the narrowed sleeves and the knitted cuffs in the sleeves, which also have a practical thumb hole, help to limit the heat loss. The shoulders are provided with reinforcement to prevent wear and also the elastic narrowing in the back is a comfortable plus of this jacket. Inside: Fixed quilted lining, Knitted cuffs in the sleeves with thumb hole, 1 inner pocket. Exterior: Inner collar in fleece, Fitted with hood (hood available separately), Zipper with flap, 1 patched chest pocket with flap 2 inset pockets with flap, 1 sleeve pocket + pen pocket Rounded-in sleeves, narrowed sleeves by means of Velcro closure Shoulder reinforcement, Elastic narrowing in the back, Extended back and Back length 83 cm (L). Fabric: 100% polyamide; ± 185 g / m² + HV - 100% PES ± 220 g / m² - Hi-vis Cordura: 100% polyester ± 210 g / m². Color: fluo yellow / navy. Compliant with: EN 342.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
Fireproof Blanket fiberglass. Size 180 x 180 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Green safety boot in polyurethane, fitted with a steel toecap and steel anti-perforation midsole. Antibacterial treated lining. Improved insole; premium, 3x better moisture absorption, 100% better energy absorption. Shock-absorbing antislip sole. Thermal insulation for temperatures down to -50°C. Sizes: 37/38, 39/40, 41-43, 44/45, 46-48. Resistance: minerals, animal and plant oils and fats, disinfectants, fertilizer, solvents, various chemicals. A strong, durable Purofort boot for a variety of uses in the agricultural sector.
Burnshield spray, 125 ml bottle, has cooling effect on burns.
Escape mask (halfface) with ABEKP2 filter. Protects against organic and inorganic gases, solvents, sulphur dioxide, acidic gases, am monia, organic ammonia derivatives and toxic dust, mist and smoke particles. Easy to put on. Working time: at least 15 minutes. Pack aged in plastic box for belt or wall attachment. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosp here. Shelf life: four years.
AX gasfilter in plastic housing for Moldex masks series 7000 and 9000 forprotection against organic gasses with boiling point <65°C. For single usage. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
A2 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 2: up to max concentration of 0.5%. processes with chemical risks.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Reduced peak. W ith woven ventilation opening along the side. Size: 54-62cm.
Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%. processes with chemical risks.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Blue industrial paper roll, 100% recycled fibre. High tensile strength, more volume in the hand. High absorption. Dimensions: length 380 m x width 26 cm, 2 layers, 1000 sheets. For use with metal floor stand, art. no. 00330081.
Jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / Raglan sleeves / Elasticated wristband / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6with PU coating; ± 170 g / m² Colour: W02 white
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted w ith a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-48.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Coverall, polypropylene / polyethylene with waterproof coating,elasticat wrists and ankles, elastic in the waist, zipper, hood. Available in white. Sizes: L - XXL.
Burnshield gel, 50 ml bottle, cools burns.
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Air regulator in Zytel (glass fibre reinforced polyamide) on belt for use in combination with 3M air hoods with bayonet coupling.Fitted with pressure reducer that eliminates any pressure fluctuations from the compressed air line, which provides improved comfort because the airflow remains constant. With regulator to adjust the air flow in the airhood. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 3.5 - 8 bar. NPF: 50 with M-100 and 200 with all other compliant hoods. Minimum airflow 170 l/min, max. 305 l/min.
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XST). The clear polycarbonate lens is fog-free on the inside and anti scratch on the outside.
This apron is made of polyethylene and is recommended for use in the food industry. Available colors: Blue, green, yellow, red and white. Dimensions: 117 * 69cm.
Low shoe in waterrepellant microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in polyester. Outsole in EVA/Rubber, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Dispenser for use of 1000 ml and 2000 ml soft bottles.
Effective skin protection against water-soluble substances. Stokoderm Aqua stabilises and regenerates the skin barrier and prevents softening of the skin during damp work and inside gloves and protective clothing. Also an absolute must for frequent contact with water-based substances: water-based oils and cooling lubricants/ water-based solutions of dyes, acids, alkaline solutions, salts, cleaning agents and disinfectants/ cement, lime and fertilizers. Stoko Protect+ tube 100 ml. Protection against water-soluble substances. PPE category: not applicable.
Coverall, polypropylene, 50 gr./m², hood with elastic, zip closure under flap, elastic at wrists and ankles. Available in: white, blue. Sizes: L- XXL.
These reusable & detectable earplugs are an ideal alternative to otoplastics for personnel who are only temporarily exposed to noise or for temporary personnel who work under noisy conditions. The Comfoor Parttime includes a unique filter that filters out all the harmful noises, without completely blocking the ear. As a result, conversations and sounds from the surroundings remain audible and there is no sense of vertigo. It is made of skin-friendly, durable silicone material that easily conforms to the ear. The result is a good seal and superb wearing comfort. Thanks to the unique design and special grip, the Comfoor Parttime is easy to place in the ear and to remove. Can be optionally fitted with a cord with clothing clip. Available in: blue. (SNR 24 dB).
Dust mask, class P1, for irritating dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. Various classes of the Gobi series can be distinguished based on the different colours of filter material on the inside of the mask. NPF: 4.
Overshoe in nonwoven PP with strong anti-slip sole in PVC. Color: white on top and blue on the sole. Size: 170 x 410 mm, no PPE.
Very effective hand cleaner for heavy soiling with oil, grease, soot, graphite, metal dust and lubricants! Contains skin-friendly abrasive granules made from refined walnut shell powder and is solvent-free. Hand cleaner without solvents for heavy soiling. Content: 250 ml tube. PPE category: not applicable.
White female clog SB in perforated microfiber, with a 220J steel toecap Adjustable buckle. Liner in Cambrelle and sole in PU/PU. Sizes: 35-42.
Mini cable locking system - nylon cable The mini-cable locking system with nylon cable is also suitable for locking interrupters. Not PPE.
Versatile metal detectable disposable knife. Suitable for cutting single-layer cardboard, foil, and strapping tape, but also for opening adhesive tape and scraping excess substances from smooth surfaces. Can be ordered per 10 pieces.
These unisex thermal trousers have long legs and are suitable for both men and women.
Freestanding emergency shower and eye-wash fountain 8300 Axion, fixed connection to the water. The shower is manually operated via the drawbar, the eye-wash fountain with foot pedal or the pressure plate. The receptot of thr eye-wash is in stainless steel, the shower head in ABS. Provision of security icon, and automatic control of water eye-wash fountain. Emergency shower Height: 211 cm. eye-wash fountain Height: 107 cm. Suitable for environments with risk of contamination by hazardous liquids. No PPE
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
