BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Full peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: blue, red, green, black, navy blue.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Full peak. With woven ventilation opening along the side. Size: 54-62cm.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Short peak (50mm). With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-64cm.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-64cm.
Comfortable bump cap made of maintenance friendly and breathable DuPont Teflon polyester, with modern 'casual' baseball cap look. Has a wheel ratchet. Reduced peak. With woven ventilation opening on top panels. Size: 54-62cm.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Reduced peak. W ith woven ventilation opening along the side. Size: 54-62cm.
Bump cap made of polyethylene with plastic headband and sweatband. Colours: white, yellow, blue, red, green, orange.
Baseball bumpcap with reduced peak (25mm) and ABS protection. Sizes: 52-65cm.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
Cap with reinforced front, 6 panels, with ventilation holes, curved flap with contrast colored edge and adjustable metal clip closure. Quality: 100% cotton (drill, heavily combed), 350 g / m². Available sizes: Universal. Available colors: Black and navy.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Normal peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 60 cm to 63 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 55 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Baseball bumpcap in nylon, frame in EVA and shell in ABS. Fitted with ventilation wholes and velcro strap at the rear of the head.
Hat, 100% cotton, 350 gsm, 6-panels, Eyelets, Tonal button adjustable clip fastening, Low stylish profile.
Comfortable bump cap made of maintenance friendly and breathable DuPont Teflon polyester, with modern 'casual' baseball cap look. Has a wheel ratchet. Full peak. With woven ventilation opening on top panels. Size: 54-62cm.
Comfortable fire retardant bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. Protective liner is removable. Size: 53-63cm.
Baseball bumpcap with reduced peak (55mm) and ABS protection. Sizes: 52-65cm.
Comfortable bump cap made of flame retardant Proban material, with modern 'casual' baseball cap look. Full peak. With woven ventilat ion opening along the side. Size: 54-62cm.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Washable at 60°C. Size: 53-64cm.
Bumpcap in nylon or hi-vis polyester with reflective accents, with LED lighting technology under the short peak: Protection against cranial bumps and bruises from a state-of-the-art shell; comfort and style from a very cool lid. Built-in LEDs illuminate projects without a flashlight or bulky headlamp (48 lumens). Battery life of approximately 30 continuous hours. Removable impact-resistant shell with foam lining. Sizes: 56-64cm.
The Air Stream 3 safety cap ensures optimal air circulation and a refreshing feeling throughout the day. It provides ventilation in three areas (sides and front) for enhanced comfort. The 3 cm visor protects the wearer from the sun’s rays while maintaining a clear field of vision. In addition, the cap complies with the EN812 standard and is certified according to European regulations. The elastic tightening at the back keeps the cap securely in place so it does not fall off.
Cap with 5 panel in 100% cotton. Seamless front panel, Eyelets, peak with six rows of stitching, RipStrip size adjuster, perfect for printing or embroidery. Available colours: white, black, graphite grey, light grey, navy, royalblue, yellow, orange. No PPE.
220 gsm, 100% nylon, 6-panels, 3M reflective contrast trim on peak , tear release fastening. Colours Orange and Yellow EN 471 certified.
Light hat in 100% polyester (125g/m²) with 5 panels. Preformed panel in recycled PU, adjustable size by velcro, removable label, can be used for embroidery and/or transfer print. Available size: uni. available colours: navy, pink.
100% heavy brushed cotton, 260gr / m². Preformed flap with contrasting piping. Adjustable closure with a silver metal buckle.
Baseball bumpcap HC23 First base 3, winter version, reduced peak 55mm. First Base 3 Winter helps ensure workers stay warm and dry in cold and wet weather conditions, offering a practical indoor and outdoor bump protection solution.
Bumpcap in nylon or hi-vis polyester with reflective accents, with LED lighting technology: Protection against cranial bumps and bruises from a state-of-the-art shell; comfort and style from a very cool lid. Built-in LEDs illuminate projects without a flashlight or bulky headlamp (48 lumens). Battery life of approximately 30 continuous hours. Removable impact-resistant shell with foam lining. Sizes: 56-64cm.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 52cm to 54cm. Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Cap B010 with adjustable size for a perfect fit. Quality: 65% PES, 35% Cotton 190g/m².
Comfortable winter bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
The chapka is equipped with a protective ABS shell and complies with the EN812 standard, ensuring worker safety against impacts. It is designed with water-repellent fabric, making it suitable for outdoor use in all weather conditions. The chapka is washable at 30 degrees and lined on the inside and sides to provide warmth to the wearer.
The Workwear beanie can be worn with or without a protective shell. It provides warmth and visibility for the wearer. Made entirely of acrylic, it is washable at 30 degrees. You can customize the beanie by adding your logo. It’s an excellent solution to stay warm while remaining protected against splashes or light impacts.
Safety cap specially designed for winter: an innovative model that provides protection while keeping the wearer warm. The Surflex safety cap complies with the EN812 standard and meets all market requirements by protecting against impacts from hard and stationary objects. Its ABS shell is removable and offers optimal protection for the frontal and lateral parts of the head.
Winter hat in 100% polyester fleece anti-pilling (80g/m²), low profile model, ear protectors, YKK fastening. Available sizes: universal. Available colours: black, navy, forest green.
Black Double LED Beanie with Protective Shell This innovative beanie offers optimal protection and visibility in dark environments. Equipped with dual LED lighting and a removable protective shell compliant with EN 812:2012, it combines safety, comfort, and practicality. With a brightness of 150 lumens and a battery life of 2 to 4 hours at full power, this beanie ensures reliable illumination. It features three light modes: High, Medium, and Flashing. Certified CE and RoHS, it comes with a USB charging cable for easy recharging. Available with or without protective shell. Perfect for outdoor work or low-light conditions – stay warm, safe, and highly visible!
Fire Retardant Safety Cap This safety cap is made entirely of 100% cotton, making it both comfortable and flame-resistant. Cotton is a fire-retardant material that provides extra protection in high-risk environments. The cap complies with the EN 812 standard to ensure optimal safety and features an elastic band at the back for a secure fit, preventing it from slipping during work. Thanks to its integrated protective shell, the Fire Retardant cap offers not only impact protection but also fire resistance. Perfect for those who want to combine warmth, comfort, and maximum safety in one product.
The ECO safety cap made from recycled polyester is produced using fibers and a sustainable manufacturing process, reducing its environmental impact. The goal is to promote more eco-friendly practices. This cap features a protective shell compliant with the EN812 standard to safeguard the head against impacts. It is available in black and navy blue, with a 5 cm visor. An elastic strap at the back ensures better stability on the head.
