BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
The Workwear beanie can be worn with or without a protective shell. It provides warmth and visibility for the wearer. Made entirely of acrylic, it is washable at 30 degrees. You can customize the beanie by adding your logo. It’s an excellent solution to stay warm while remaining protected against splashes or light impacts.
Safety cap specially designed for winter: an innovative model that provides protection while keeping the wearer warm. The Surflex safety cap complies with the EN812 standard and meets all market requirements by protecting against impacts from hard and stationary objects. Its ABS shell is removable and offers optimal protection for the frontal and lateral parts of the head.
The USB LED headlamp attaches easily to the visor of the cap and can be adjusted to direct light upward or downward. It can be removed at any time. Three light intensities are available to adapt to the working environment (low, medium, and high). It recharges conveniently using the included USB charging cable.
Compatible with bump cap AIR STREAM, DEFENDER en BADECAP.
Cotton/Para-aramid front cover to protect the helmet from flames and metal splashes. To use in combination with the G3501 helmet.
4-points suspension with leather sweatband for Peltor G2000 helmet.
Transparent chin/mouth guard for P100N helmet. Small version (46-53cm).
Transparent chin/mouth guard for P100N helmet. Large version (62-67cm).
Safety helmet with integrated face shield (class 1) made of ABS with red reflective sticker. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (Class 1) made of ABS with arc flash earflap and red reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated eye protection made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
The 3M™ Premium 4 Point Chin Strap X5-P4PTCS2 has a magnetic buckle and features an exclusive selector function to switch between EN397 or EN12492 safety standards. No PPE.
Multifunctional safety helmet for working at heights and rescue work. With MIPS technology, which combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Clamps for attaching extras with an elastic band, e.g. goggles and LED light for climbing helmet. Head circumference: 51-63cm .Conforms to EN 397, MM, LD, -30°C / EN 12492 .
Cotton/Para-aramid neck cover to protect from flames and metal splashes. To use in combination with the G3501 helmet.
Safety helmet with integrated eye protection made of ABS with grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated eye protection made of ABS with red reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
This new patented Dry Cooling technology, in partnership with Inuteq B.V, is designed to provide enhanced cooling comfort for the wearer. This revolutionary technology is activated with a small amount of water and re-activation is only required every 1-3 days depending on the environment, humidity and airflow.
Crowd control helmet made of glass fiber with fire retardant gel coat layer, shock inner lining in PU, 3mm thick pc visoer with anti-mist treatment, neck guard is coverd with flame retardant textile and is attached with press buttons on the inside of the outher shell. The helmet has 7 ventilation holes through the outer shell. The inner liner can be removed whitin seconds and does not absorb any liquids. The chin strap is constructed to be easy to adjust, close and open all with duty gloves on. The chin cup is big enough to make sure that the helmet stays in position during fights.
The FCT helmet is designed to give maximum protection for the training. However, the head is never a target area in close combat training. The maximum opening on the cage is 15 mm in the front of the cage. There is a double locking with velcros on the back of the helmet. On the ear area there are two holes. Outside material: nylon with PU outer surface; plastics: 1,5mm HDPE.
Chin strap 2-point for helmet H700 and H701.
Safety helmet made out of PE with standard peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
6-point suspension in textile with slip ratchet and sweatband for helmets EVO-range. No PPE.
4-point suspension in textile with ratchet for X5500 helmet.
6-point suspension in textile with ratchet for X5000 helmet.
Polycarbonate replacement visor, for the EVO VistaShield helmet.
Polycarbonate replacement spectacle, for the EVO VistaLens helmet.
6-point suspension in polyethylene with slip ratchet and sweatband for helmets EVO2. No PPE.
The Chill-Its 6670CT Evaporative Cooling Hard Hat Neck Shade straps into hard hats to deliver four hours of cooling relief while also shading the neck from sun damage. The lightweight shade features advanced PVA cooling technology for instant cooling without bulk or slime, with a wide panel that extends down for complete back-of-neck-coverage. This hard hat neck shade fits most hard hats and safety helmets, easily and securely attaching to the suspension with two hook <(>&<)> loop straps.
4-points suspension for G22C helmet with synthetic sweatband.
Chin strap for attachment to fireman's helmet Pyros F220. No PPE.
Visor for attachment to fireman's helmet Pyros F220.
Evaporative Cooling Bandana: Activated polymers bring cooling power. With hook and loop closure.
Black Double LED Beanie with Protective Shell This innovative beanie offers optimal protection and visibility in dark environments. Equipped with dual LED lighting and a removable protective shell compliant with EN 812:2012, it combines safety, comfort, and practicality. With a brightness of 150 lumens and a battery life of 2 to 4 hours at full power, this beanie ensures reliable illumination. It features three light modes: High, Medium, and Flashing. Certified CE and RoHS, it comes with a USB charging cable for easy recharging. Available with or without protective shell. Perfect for outdoor work or low-light conditions – stay warm, safe, and highly visible!
Fire Retardant Safety Cap This safety cap is made entirely of 100% cotton, making it both comfortable and flame-resistant. Cotton is a fire-retardant material that provides extra protection in high-risk environments. The cap complies with the EN 812 standard to ensure optimal safety and features an elastic band at the back for a secure fit, preventing it from slipping during work. Thanks to its integrated protective shell, the Fire Retardant cap offers not only impact protection but also fire resistance. Perfect for those who want to combine warmth, comfort, and maximum safety in one product.
The ECO safety cap made from recycled polyester is produced using fibers and a sustainable manufacturing process, reducing its environmental impact. The goal is to promote more eco-friendly practices. This cap features a protective shell compliant with the EN812 standard to safeguard the head against impacts. It is available in black and navy blue, with a 5 cm visor. An elastic strap at the back ensures better stability on the head.
This premium safety helmet combines maximum protection with outstanding comfort. The fire‑resistant chinstrap is flame‑retardant and non‑melting, while the click‑in system allows quick replacement of the internal padding. Thanks to the Adaptive Fit System, the helmet automatically adjusts to the shape of the head, with a quick‑release buckle for easy removal, even when wearing gloves. The HD EPS inner shell with thermoformed cover provides excellent shock absorption, and the DRY+ liner keeps you feeling fresh. Reflective decals enhance visibility, while 14 ventilation channels with a sliding closure ensure optimal airflow. The Easy Click System makes it simple to add eye or face protection, and the anti‑intrusion mesh prevents dust and debris from entering. This helmet is built to deliver safety, comfort, and performance in demanding environments.
