BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
6-point suspension in textile with wheel ratchet and sweatband for helmets EVO-range. No PPE.
Stickerset grey reflective of 5 pieces for the V-GARD 900 helmet. No PPE.
Safety helmet made of ABS, fitted with a 4-point textile suspension with wheel adjustment (54-62cm) and leather sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
Multinorm safety helmet for working at heights, industry and cycling. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Head circumference 52–58 .According to EN 397/EN 12492/ EN 1078 .
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap and grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
To be mounted on the helmet to connect a visor to the helmet.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. 4-points chinstrap with selectionsystem to switch between EN397 or EN12492. Helmet with 30mm slott.
Extra long sweatband, made out of Chamlon. Is PH-neutral. Suitable for Evo helmets (Does not fit Evo8).
Multifunctional safety helmet for working at heights and rescue work. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Clamps for attaching extras with an elastic band, e.g. goggles and LED light for climbing helmet. Head circumference: 51-63cm .Conforms to EN 397, MM, LD, -30°C / EN 12492 .
Super-light safety helmet with short peak, made of strong polypropylene. With 4-point textile suspension (51-63cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Polycarbonate replacement visor, for the Iris II.
Terylene suspension with ratchet, resistant to high temperatures, fittedwith an XL VABON sweatband, suitable for Centurion Vulcan S22. as PPE.
Baseball bumpcap HC23 First base 3, winter version, reduced peak 55mm. First Base 3 Winter helps ensure workers stay warm and dry in cold and wet weather conditions, offering a practical indoor and outdoor bump protection solution.
Suspension I/79G-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ber. Not separately certified as PPE.
4-points cradle with sewn in PVC sweatband
Polycarbonate replacement spectacle, for the EVO VistaLens helmet.
Bumpcap in nylon or hi-vis polyester with reflective accents, with LED lighting technology: Protection against cranial bumps and bruises from a state-of-the-art shell; comfort and style from a very cool lid. Built-in LEDs illuminate projects without a flashlight or bulky headlamp (48 lumens). Battery life of approximately 30 continuous hours. Removable impact-resistant shell with foam lining. Sizes: 56-64cm.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. 4-points chinstrap with selectionsystem to switch between EN397 or EN12492. Helmet with 30mm slott. With reflective striping.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 52cm to 54cm. Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Protection around the neck in flame retardant fabric with zipper closure at the top for easy connection to the Fleece helmet liner.
Evaporative Cooling Bandana: Activated polymers bring cooling power. With knod closure.
Stickerset red reflective of 5 pieces for the V-GARD 900 helmet. No PPE.
Msa’s replacement hard hat 6-point fas trac suspension offers a combination of advanced features for a comfortable and secure fit. Is has a quick and easy adjustment.
Comfortable winter bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Reflective stickerset of 10 pieces for the Evolite helmet. No PPE.
Multinorm safety helmet for working at heights, industry and cycling. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Head circumference 59–63cm .According to EN 397/EN 12492/ EN 1078 .
Replacement plastic sweatband suitable for use with all Peltor safety helmets. Not saparately tested as PPE.
Replacement visor for Vision Plus helmet. Has a anti-scratch and anti- fog coating.
High quality replaceable Nexus 4-points harness with easy side adjustment provides approval to EN 12492 working at height (Mountaineering helmet standard) in conjunction with the Nexus liner (1034405). Conform: EN 12492.
Safety helmet with integrated eye protection made of ABS with grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (class 1) made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Storage bag for V-Gard 900.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (53-63 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Baseball Bumpcap XTRA.
Safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. Helmet with 30mm slott.
Storage bag for KASK helmets. No PPE.
Super-light safety helmetwith short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Sweatband removable for cleaning. Fits 3M SecureFit™ safety helmets, series X5000 and X5500. No PPE.
Winter cap. 80% cotton, 15% polyester, 5% Spandex. Sizes: M/L. Color: HiViz orange. No PPE.
Super-light safety helmet with short peak, made of strong polypropylene. With mesh visor and earmuffs. With 4-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
The chapka is equipped with a protective ABS shell and complies with the EN812 standard, ensuring worker safety against impacts. It is designed with water-repellent fabric, making it suitable for outdoor use in all weather conditions. The chapka is washable at 30 degrees and lined on the inside and sides to provide warmth to the wearer.
Super-light safety helmet with short peak for pleople with a bigger head (60-66cm), made of strong polypropylene. With 4-point textile suspension and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Waterproof outer with Fleece inner and High Visibility colour with reflective strips. Zip top fastening to be fitted to Fleece Helme t Liner. No PPE.
Aluminized fabric neck cover offering flame, splash and IR resistance to the wearers neck. To use in combination with the G3501 helmet.
Transparent chin/mouth guard for P100N helmet. Medium version (54-61cm).
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.
The 3M™ Premium 4-Point Chin Strap X5-P4PTCS1 is an optional extra for the 3M™ SecureFit™ X5500 Series Safety Helmets. The adjustable chin strap has a magnetic buckle and replaces worn or damaged parts. No PPE.
Reflective stickerset of 10 pieces for the Evo2/3 helmet. No PPE.
Super-light safety helmet with short peak, made of strong polypropylene. With 4-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Polycarbonate replacement visor, for the Idra 2 helmet.
Clear, 4mm PC double anti-fog visor for P100N helmet with anti-scratch (outside). Medium version (54-61cm).
The 3M™ Premium 4-Point Chin Strap X5-S4PTCS1 is an optional extra for the 3M™ SecureFit™ X5500 Series Safety Helmets. The adjustable chin strap has a synthetic buckle. No PPE.
The 3M™ Short Visor X5-SV01-CE is molded from polycarbonate and features a scratch-resistant anti-fog coating. The visor is designed to fit 3M™ SecureFit™ X5000 and X5500 Series safety helmets.
6-point textile suspension with ratchet for safety helmet Pheos Alpine.
Safety helmet with slots for uvex visors, earmuffs and lamps. Side Euroslot adapters (30 mm) for attaching earmuffs. With MIPS technology, which combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Suitable for use by electricians as helmet shell is fully enclosed. Six-point textile band attachment ensures optimal fit and comfort.
Neck cape for Pyroshelmet in Aluminium. No PPE.
The Workwear beanie can be worn with or without a protective shell. It provides warmth and visibility for the wearer. Made entirely of acrylic, it is washable at 30 degrees. You can customize the beanie by adding your logo. It’s an excellent solution to stay warm while remaining protected against splashes or light impacts.
Safety cap specially designed for winter: an innovative model that provides protection while keeping the wearer warm. The Surflex safety cap complies with the EN812 standard and meets all market requirements by protecting against impacts from hard and stationary objects. Its ABS shell is removable and offers optimal protection for the frontal and lateral parts of the head.
The USB LED headlamp attaches easily to the visor of the cap and can be adjusted to direct light upward or downward. It can be removed at any time. Three light intensities are available to adapt to the working environment (low, medium, and high). It recharges conveniently using the included USB charging cable.
Compatible with bump cap AIR STREAM, DEFENDER en BADECAP.
