BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
ARC FLASH APG TX MIDDLE SIZED GLOVES. For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for extra wide arms. Lenght 40 cm.
5-finger gloves, palm and back in water and oil repellent cowsplit leather, inner lining of reinforced TEKINOX. Sizes: 11. Application: tasks with extreme risk of cutting, heavy industrial activities. Standards: EN388:2016 4.X.4.4.F, EN407: X.1.X.X.X.X
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 305 mm.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
The 100% nitrile glove provides protection against a wide range of oils, solvents and chemicals. The diamond grip surface finish increases grip wet road surface for more convenience and safety. Length 33cm, thickness 0.15mil Sizes: 7(S)-11(XXL)Conform: EN388:2016 4.1.0.1.X, EN ISO 374-1:2016 Type A: AJKLOPT, EN ISO 374-5:2016 VIRUS
Blue, unlined nitrile gloves with Aquadri composite to keep hands free of perspiration. Very good physical characteristics, great ta ctility, silicon-free. Good chemical resistance to greases, oils, hydrocarbons, water-thinned solutions and various acids.
Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Strong hook and loop fasteners with universal systemfor molle or belt. Perfect for plate carriers, backpacks and all belt systems. Easy to open and close with additional tab, multi-purpose system for gloves, ropes ,...
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
Versatile tactical winter glove designed to enable weapon operation and precise frisking. Slim all-round fit and exceptional dexterity. Windproof and water-repellent durable softshell fabric with fleece liner, TPR reinforcements, touchscreen compatible.
Blue nitrile disposable glove providing excellent protection against chemical splashes. Textured fingertips. Food approved and touchscreen compatible. Extended cuff. Thickness: 0.20 mm Length: 295 mm Sizes: 7–11 Compliant with: EN 374‑1: Type A JKLOPST, EN 374‑5: VIRUS, EN 421
Welding and heat protection glove made of synthetic material with cut protection level E. Suitable for welding and medium heat environments, especially TIG and MIG. Length: 35–39 cm Sizes: 7–12 Compliant with: EN407: 42324X EN12477: TYPE A EN388: 3X32E
Disposable black nitrile glove with protection against chemical splashes Type A (JKOPST). Ideal for environments where silicone must be avoided, such as painting or finishing work. Improved grip and control thanks to textured palm. Approved for food contact, silicone-free, powder-free, and suitable for touchscreens. Tested for substances that may interfere with paint adhesion. Length: 295 mm Thickness: 0.20 mm AQL: 0.65 Sizes: 7-11 Compliant with: EN388: 1000X EN374: Type A (JKOPST) EN374-5: VIRUS
Thermal silicone glove for food contact, resistant to temperatures up to 350°C. Fully waterproof and resistant to hot liquids and steam, featuring a comfortable cotton fleece lining and a long cuff for forearm protection. Total length: 45 cm. Suitable for bakeries, commercial kitchens, food processing industries and industrial applications. Sizes: 7 - 11 Compliant with: EN 407:433XXX – EN 388:3241X EN511:121
Work glove made from graphene-based fibre with nitrile foam coating. 15 gauge. Touchscreen function. Sizes: 6-11. Conforms to: EN388:4131A, EN407:X1XXXX.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Thin black work glove with blue nitrile coating on a seemless nylon liner. Approved for food contact. A close fit, breathable and co mfortable glove.
Waterproof goatskin work glove designed for tough, wet outdoor environments exposed to heat. The glove has reinforced knuckles and i nner hand. Fully lined with paraaramide, which also provides cut protection level B. Double stitched, heat-resistant seams. Equipped with an extended goatskin cuff for additional protection up the arm. Certified for welding and in accordance with ATPV level 4 CAL 47. Sizes: 7-12.
Medium duty impact glove with slip-on cuff and double-layer palm made of cut-resistant synthetic leather. TPR impact protection with ANSI / ISEA 138 score 2. Reinforcement around the index finger to protect abrasion-sensitive areas. Highly visible for extra safety. Sizes: 6-13. Conforms to: EN388: 2016 3.X.4.3.E.P
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Specially developed for operating firearms, ultra-thin and slim wit, feels like a second skin. The synthetic suede in the palm protects the user against contact heat of 100°C for 10 seconds.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass. Compatible with touchscreens.
Very abrasion-resistant glove with innovative ErgoShield protection: TPR impact protection on the back of the hand, tight fit. Semi-fingerless design ensures perfect control during weapon operation and touch screen devices.
Green, latex‑free disposable neoprene glove, suitable for touchscreen use. Extended cuff. With fingertip pattern. Food approved. Thickness: 0.12 mm Length: 290 mm Sizes: 7–10 Compliant with: EN 374‑1: TYPE B KPT, EN 374‑5 VIRUS, EN 421
Glove in roughened interlock with nitrile coating (35 cm long). Smooth Solknit offers excellent abrasion resistance and a perfect grip on wet and oiled materials. It also protects against a wide range of chemicals, detergents and solvents. Extremely suitable for the chemical industry, the paint and petroleum sector, the transportation and treatment of hazardous substances. Food approved, antistatic and silicone free.
Providing incredible EN388: 2016 level F cut resistance (ANSI 105:2016 A8), the glove is light and dexterous able to be worn for long periods of wear. An extended cuff provides added protection to the wrist area and all gloves in the food range can be industrially laundered to the ISO 15797:2018 standard. EN388: 2016 level F cut resistance (ANSI 105:2016 A8); EN388: 2016 4 × 4 X F; New yarn structure delivers improved grip and mechanical performance; Permanent antimicrobial component; Free from glass fibre to prevent product contamination; Tested to EN ISO 15797 industrial wash test to withstand x50 washes at up to 85°c and drying up to 70°c with no effect on cut resistance; Colour coded to prevent cross-contamination; Designed for knife hand use; Ambidextrous.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 180 °C. Silicone free.
Black powder-free biodegradable 100% nitrile glove. Completely silicone free. Chlorinated glove to offer more comfort and to reduce tackiness. Antistatic. Package size XXL : 90 pieces.
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL : 90 gloves in dispenser
Green nitrile glove, 45.5 cm long and 0.56 mm thick. With a sand grain relief for good grip when working with wet objects. Good abrasion and stab resistance. Suitable for the chemical, petroleum and paint industry and for transport and treatment of hazardous substances. Antistatic, food approved. Sizes: 7-11.
Welding gloves made of grey, very high-quality nappa leatherwithprotective cuff. The 15 cm protective cuff is made of cowsplitleatherand the fingers have reinforced seams, but these gloves nonetheless have remarkably good tactility. industrial welding (TIG). Sizes: 9 and 11
High quality red nitrile glove, 38 cm long and 0.425 mm thick. Solvex offers superior resistance to particularly hazardous applications in the chemical industry. Hence the success of this glove in the chemical, petroleum and paint industries, in relation to the transportation and processing of hazardous, corrosive substances and for working with detergents and solvents. Antistatic, silicone free.
knitted cut resistant glove (cuff 13cm) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. Long for extra protection of the forearm. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Gives protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Conform: EN 388 4.X.4.2.C and EN407: X.1.X.X.X.X.
Sturdy glove made of 100% nitrile with rolled cuff. Fingertips with textured finish for extra grip. Completely powder-free and free of natural rubber, wax, silicones or softeners. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Yellow liquid-tight natural rubber glove, treated to resist bacteria. Length: 30 cm, thickness: 0.35 mm. Recommended for retail, waste management, cleaning services, commercial kitchens, ... Also ideal as a household glove. Old name: Econohands Plus. Sizes: 7-11.
Lined, nitrile gauntlet gloves with new Grip Technology. Inner and outerlayer of nitrile rubber. Extremely good physical characteristics andgood grip, even in wet and oily conditions. Finished at top withstraight-cut opening, with seamless knit nylon liner. Food approved. Antistatic, without silicones. Good chemical resistance to greases, oils and hydrocarbons.
Sturdy glove made of 100% nitrile with rolled cuff. Completely powder-free and free of natural rubber, wax, silicones or softeners. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Gloves made of black neoprene, flock-lined with cotton for perfect absorption of moisture from perspiration. With diamond pattern finish for good grip in dry and wet conditions. Sizes: 8 / 9 / 10 /11, length: 33 cm.
"Wonder Grip® Thermo" is an evolution of "Wonder Grip® Thermo Lite", with a doubled latex coating and a 10-gauge acrylic pile loop liner. The napped acrylic liner makes the hands feel warmer in cold conditions. Furthermore, "Wonder Grip® Thermo" can be used in a below-freezing environment. Sizes: 7(S) -11(XXL).
Nitrile, liquid-proof gloves with excellent tactility and effective abrasion and puncture resistance. Nitri-Star gloves are flock-lined and silicon-free. Good protection against grease, oil and solvents. Sizes: 7/8/9/10/11/12, length 33 cm.
Gloves made of sturdy, top-quality cowgrain leather. Driver Vachette has a perfect fit, reinforced seams along the fingers and high tactility.
Light blue disposable gloves in nitrile. The profile guarantees excellent grip in dry or humid conditions. Un-powdered. Weight (size M): 3.5 g / Thickness: palm 0.07mm / fingers 0.11mm / cuff 0.06 mm. Applications: Light chemical applications in labs, assembly, product control, food sector. Tested for food contact. Available sizes: S-XL.
knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.
