BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Length 41 cm, Sizes: 7-12.
Orange insulating natural rubber gloves. Their thinness and grip surface make them easy to handle. Excellent dexterity. Sensitive to touch, maximum grip in wet conditions. Working voltage of 1,000 volts, test voltage of 5,000 volts. Sizes: 7–11 Compliant with: EN60903 Class 0, AZC. Arc Flash: ASTM F2675. ATPV: 12 cal/cm².
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Flexible adapting cut protection glove without coating, developed in collaboration with food companies. Ideal to put on under a disposable glove or chemically resistant glove. Oekotex and touch screen
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
The thermal acrylic lining provides excellent thermal insulation so work is more comfortable. Excellent thermal insulation. Soft, non-fluffy. Very absorbent to maintain dry hands. Ideal as a liner under unlined over-gloves. Sizes: 7 and 9.
Biodegradable single use glove, powder free.
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
Knitted glove with HPPE and Zirnium with black PU coating. Extremely good cut resistance. Touch screen function on top of thumb and index. Sizes: 6-12.
Thin glove for medium arc flash protection with high cut resistance. Flame retardant neoprene coating on the palm. Sizes 7-11. Complies with: ASTM F2675 ATPV palm: 22cal/cm², backhand 5.9 cal/cm², IEC 61482-1-2 CL1 EN388:2016: 3X31D EN407: 41XXXX
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
Cut resistant and comfortable welding glove in reverse goat leather, with Kevlar lining and seams.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 250 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
AlphaTec® 02-100 laminated safety gloves have a five-layer design with hypo-allergenic lining. Can also be used as liner gloves. Extremely supple and ergonomically formed model based on patented seam technology. Offers protection against an exceptionally wide range of chemical products and solvents.
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Thermal insulating glove with PVC dots on palm. Glove made of Thermalite fibres.
Gloves with American cut, with heat resistant cowsplit leather (to 350 ° C), lined with molton wool around the hand and the cuffs, veinprotection, cuffs made of natural split leather with Kevlar seams.
Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 406 mm.
Chlorinated and powder‑free disposable nitrile glove with excellent fingertip sensitivity and a fingertip grip pattern. Easy donning and doffing. Food approved and touchscreen compatible. Thickness: 0.11 mm / 2.36 Length: 240 mm Compliant with: EN 374‑1: Type B JKT, EN 374‑5: VIRUS
Slim fit tactical glove, 360° cut-resistant lining in Kevlar®. D3O® impact protection on the back of the hand and wrist. Flame retardant and water-repellent properties. High-quality goat leather with contact heat protection, Kevlar stitching yarn. Reinforcement between thumb and index finger. Touchscreen compatible (thumb and index finger) Extended cuff with cut-resistant lining Elastic wrist and forearm closure. Attachment loop for easy carrying on belt or gear Sizes: 6-13 Conforms: EN 388: 2422CP, EN 407: 41XXXX
High-quality cowgrain leather gloves. The 10 cm rubber-impregnated cotton protective cuff offers extra protection to the wrist and lower arm. Sizes: 9, 10, 11.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Stretchy glove, seamlessly knitted with blue Dacron fibres.
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
Seamless knitted glove (15 gg) with enhanced grip for wet and oily conditions, offering excellent dexterity and sensitivity. Featuring XLNT nitrile technology, food-grade, soft feel and a snug fit, with a tight and flexible cuff. Free of DMF, silicone, and natural latex. Oeko-Tex Standard 100. This FA (Food Adjusted) version is unprinted. Sizes: 6-11, Conforms to: EN388:2016 4.1.2.1.X, EN407: X.1.X.X.X.
For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
Canvas protective bag made of 100% cotton for the storage of insulating gloves for electricians. Size: 14 inches.
Arm protector heat and cut resistant. Length 45 cm.
Cut resistant sleeve with CRF® technology, polyester, spandex and stainless steel fibre yarn. Approved for handling food. Elastic, length 420-490mm with thumb loop. Conforms to: EN388:2016: 3.X.4.X.D
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. Touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. DMF free, with impact protection on the back of the hand. Sizes 6 - 12.
Durable quality leather welding gloves in red cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 9-10-11-12. Length: 35 cm. welding.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Cut-resistant glove in special graphene fibers with HCT® micro foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers.
This highly durable natural latex glove offers a high level of protection and good flexibility. Cotton lining creates comfort and the pattern on the hands ensures a particularly good grip. The gloves are extra long and come in two colors, blue and orange. For orange choose 8163 . Suitable for contact with foodstuffs . CAT III . In line with : EN 388:2016+A1:2018 3131X EN ISO 374-5:2016 EN ISO 21420:2020 EN ISO 374-1:2016/Type B AKLPT EN 407:2020 X2XXXX
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Static dissipative glove: exceptional protection against electrostatic discharge. Proprietary nitrile formulation: ensures low vertical resistance below 10⁸ Ω. TNT™ Chemical Splash Resistance Technology: enhanced chemical protection. Touchscreen compatible. Food approved. Length: 24 cm Thickness: 0.16 mm Sizes: S – XXL Compliant with: EN 16350, EN 374: JKPT – VIRUS
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface. Food approved. Thickness: 0.11 mm – Length: 240 mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374 – TYPE B: JKT – VIRUS – EN 421
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Thin 18‑gauge cut‑resistant glove with nitrile coating. Touchscreen compatible and food approved. Sizes: 6–11 Complies with: EN 388: 4X31B – EN 407: X1XXXX
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface for excellent grip and precise object handling. Long cuff for optimal protection. Food approved. Thickness: 0.11 mm. Length: 290mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374: TYPE B: JKT – VIRUS – EN 421
Specially developed for operating firearms, ultra-thin and slim wit, feels like a second skin. The synthetic suede in the palm protects the user against contact heat of 100°C for 10 seconds.
This glove combines 3 important elements needed for handling ropes: dexterity, high abrasion resistance, and good grip.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Sizes: 8,9,10.
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Optimized fit that integrates the nylon liner (18 gauge) into the nitrile and neoprene shell for better dexterity & tactility versus double gloving. Excellent dry & wet grip enhance dexterity and reduce hand fatigue. Cuff can be folded to act as a gutter to prevent chemicals running down the arm. Food approved.
Ansell HyFlex 11-814: Ultra-thin, breathable work glove with exceptional sensitivity, strong grip, and excellent comfort – ideal for precision work. 18 gauge. Nitrile foam coating. Sizes: 5-12 Compliant with: EN388: 3121A
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
• 15 gauge grey Kyorene® graphene liner • Full blue nitrile coating with black HCT® micro foam nitrile palm coating for superior oil and water resistance • Bacteriostatic kills harmful bacteria • Thermal regulating to keep the hands comfortable • Odor neutralizing to keep the gloves smelling fresh • DMF and silicone free
Gloves with chemically resistant coating consisting of 7 layers. Can also be used as liner gloves. Extremely supple and ergonomically formed model. Offers protection against an exceptionally wide range of chemical products and solvents. Silicone and latex free. Working temperature: -40°C to 70°C
Loggers working gloves with mechanical resistance in 100% goat leather with nylon and spandex inserts in red color. They provide great dexterity and grip. They have a perfect fit, and impact and vibration foams in the palm of the hand. Sizes: 8-12.
