BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 406 mm.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
ESD working glove compatible with touch screens. Seamless nylon / carbon. Without coating. Very comfortable. Sizes: 5-11.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Glove with double nitrile coating on a very flexible, thin 18 gauge seamless nylon/spandex liner. The fully coated glove prevents penetration of oils (due to the red smooth nitrile coating) and this without loss of grip (due to the black nitrile foam coating). Highest protection against abrasion in combination with short-term protection against contact heat (100°C). In accordance with: EN388:2016: 4.1.2.1.A, EN407:2021: X.1.X.X.X.X.
Yellow, soft and comfortable 30 cm gloves in unlined flocked natural latex. Thickness 0.45 mm. Good chemical resistance. Suitable for food processing, agriculture, automotive assembly, chemical industry, pharmaceutical industry.
Chemical protection glove, fully lined, 0,3* mm (*chem-layer) nitrile, fully dipped, sandy finish, 18 gg, nylon, oil and grease resistant, water and oil repellent, for allround work. Suitable for contact with foodstuffs, except for fatty foods. CAT III . In line with : EN 388:2016 4121X, EN 407:2004 X1XXXX, EN ISO 374-1:2016/Type A AJKMNOPT, EN ISO 374-5:2016/Virus .
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Waterproof PVC bag with small karabiner to attach to belt. Ideal for storing and transporting electro gloves. Dimensions: 450x180x70 (mm)
Very durable and super comfortable glove, seamlessly knitted in a nylon fabric with a double nitrile coating. Glove is fully coated for applications involving a lot of oil or water. The glove provides excellent grip.
Goat-hide leather glove for TIG welding. Heat resistant to 100 ° C. Length of cuff: 16 cm. Sizes: 6-11.
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
Knitted glove with HPPE and Zirnium with black PU coating. Extremely good cut resistance. Touch screen function on top of thumb and index. Sizes: 6-12.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Very supple, black fireman's gloves, 100% leather with lining of interlock Kevlar® and cotton. Leather wrist protection with Velcro closure and 15 cm long cuff of supple cowsplit leather. Water repellent and heat resistant. Available in: black. Sizes: 8 / 9 / 10 / 11 / 12, length 35 cm, cuff 15 cm.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 41 cm.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
A durable neoprene glove with great dexterity and excellent grip. The glove is comfortable and flexible due to the preformed fit and the Velcro at the wrist ensures that the glove stays in place. The glove has a touchscreen function and excellent grip in the palm thanks to the Guide Grip Pattern. Padded palm and thumb/index finger reinforcement for a long glove life. Sizes: 7-12. Complies with: 2.1.2.1.X, EN511: X.2.X, EN407: X.1.X.X.X.X
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
Cut and heat resistant sanitized work glove compatible with touch screens
Arm protector heat and cut resistant. Length 45 cm.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Extra long and thick single use glove for veteranary use or use in impoundments made of PE. Liquid tight, does not protect against c hemicals. to order by 50 pieces.
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
Extremely flexible glove in natural rubber latex. operating voltage of 1000 volts, test voltage of 5000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 360 mm.
Soft and comfortable winter lined knitted glove suitable for versatile work in semi-wet and slightly oily environments. Nitrile fully dipped with sandy finish on palm and with touchscreen function. Withstands contact heat up to 250°C/482°F. More effective energy usage in combination with use of solar energy in the production has reduced the CO2 emission by 60g/2.1 oz/pair. More effective laundry process has reduced the water usage by 70% (6 liter/1.6 gal per pair).. Sizes 6-12. Complies with: EN388:2016 4.2.3.2.A, EN407: X.2.X.X.X.X, EN511: 0.2.X
Glove with nitrile coating (cotton/polyester). Length: 30cm. Glove with high finger sensitivity.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 3: operating voltage 26,500V, test voltage 30,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
Overglove hight voltage in premium goat skin leather for insulated rubber gloves of class 1,2,3 <(>&<)> 4. Offers mechanical protection and extends the life of rubber insulated gloves. With velcro, lenght: 30 cm. Sizes: 8-12.
Purple nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Green nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X
Cut and heat resistant arm protector 45 cm., with thumb opening. Ergonomic design. Protects for 21 seconds againt 100°C contact heat (test report).
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 460 mm Certified Category R/C. Arc Flash score EBT: 88 cal/cm²
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Canvas protective bag made of 100% cotton for the storage of insulating gloves for electricians. Size: 14 inches.
Blue powder-free nitrile glove with rolled edge for applications in food industry. Completely latex free. Sizes: 6.5-7 to 9.5-10. Length: 24 cm. Thickness: 0,08mm. Package: per 100 gloves! Food approved.
This glove offers excellent grip in dry, wet, and lightly oily environments. The single nitrile foam coating on the palm makes the g love soft and comfortable while still providing a secure grip. Cut protection level C and reinforcement between the thumb and index finger. Knitted 18 gg lining with cut-resistant CRF® technology and partially recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016+A1:2018: 4.X.4.3.C
Cut resistant gloves with Kevlar® liner in combination with roughened latex coating offer good grip and optimal protection against cutting injuries in both dry and damp environments. Sizes: S / M / L / XL. Available in: blue.
Seamless lined glove with foam latex coating on the full glove and extra latex on the palm. Extremely good grip and abrasion resistance. Carrier in nylon/polyester. Sizes: 6(S) -10 (XXL).
Extremely good fingertip sensitivity, extra flexible, perfect fit and extremely light glove. Seamless knitted white nylon (13 gauge) Suitable for light applications in dry circomstances. Sizes: 6-11. In line with EN388: 2.1.2.X
Extreme comfort and protection in high cut risk applications for increased compliance and an uninterrupted workday. The Intercept™ Cut resistant Technology provides high levels of protection against lacerations. Lightest weight design for comfort and dexterity, su pporting worker use compliance. High abrasion resistance delivers longer product use life. Suitable for use across a wide range of applications and risks, avoiding the need to change gloves when transitioning between tasks. Intermittent handling of hot work items up to 100°C. Latex and Silicone free. Sizes: 6-11.
Glove with unique and patented knitted design (18 gauge) that allows the glove to tear easily at multiple high risk areas, significantly reducing the risk of hand injury if the glove becomes entangled in a rotating tool. Ultra thin design and nitril foam coating provides excellent tactility to grab even the smallest parts. ZONZ™ Technology offers extreme breathability to keep hands cool and comfortable. The wihte color allows quick identification of dirt to avoid product contamination. Antistatic, latex and silicone free: no transfer of silicone contaminants to metal parts prior to painting. Sizes: 6-11.
Very light and ultra comfortable all round glove constructed on a 18-gauge polyester and spandex liner with thin and smooth protective nitrile coating. Offers heat protection up to 100°C during 15sec. Ideal for precision work. Food approved. Touch screen fonctionality. High visibility yellow. Sizes : 7 (S) - 11 (XXL)
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
Supple glove in unthoughened vulcanised rubber. Test voltage 5.000 volt, use voltage 1.000 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. Sizes: 7-12.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
This glove is mainly used for handling smooth goods as well as goods with a sanded surface. Natural latex. Freedom of movement thanks to excellent comfort through extra support. Seamless. With reinforced cotton and grip. High cut-resistance and protection of the forearm. Applications: open sea fishing, forestry, oyster farming, barbed wire handling, glass industry, metal treatment. Sizes: 6-10.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 410 mm Certified Category R/C. ATPV 25cal/cm²
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Fully coated cut resistant glove with thick lining and a double coated palm. The latex coating ensures a flexible glove, even at low temperatures.
Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F
Electrically insulating glove with mechanically strong resistance. Protects against risks of Arc Flash. Outside in black, inside in red, outside has a non-slip coating. working voltage of 1000 volts, test voltage of 5000 volts. Length 360 mm, Sizes: 7-12. In accordance with EN60903 class 0 cat RC. ASTM F2675: 25 cal/cm²
Very fine and cut resistant glove (43.9N) designed for fine work with high cut risks. Can be washed up to 5 times at 40°C without loss of efficiency.
Protection against cryogenic cold down to -197°C, thanks to a wool/cotton fleece lining and an ISO Air felt for protection against e xtreme cold. Protection against cryogenic gas splashes (liquid nitrogen or liquid carbon dioxide). The quality of the leather, lined with a waterproof membrane, is the same on the palm and the back of the cryogenic gloves. This model of short cryogenic glove fits snugly around the wrist thanks to an elastic cuff. Additional wrist protection is provided by a leather artery protector on the inside of the wrist. Conforms to EN388: 3222X , EN511: 231 , EN407: x3XXXX
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 4: operating voltage 36,000V, test voltage 40,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
Gloves with chemically resistant coating consisting of 7 layers. Can also be used as liner gloves. Extremely supple and ergonomically formed model. Offers protection against an exceptionally wide range of chemical products and solvents. Silicone and latex free. Working temperature: -40°C to 70°C