BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Lined finger-sensitive nitrile cap gloves with a grip coating according to the new Grip Technology. Very good physical properties and good grip even in oily and damp/wet conditions. Top finished with straight edging. Sizes: 8 / 9 / 10, Length: 280 mm.
Seamless cut resistant glove with double nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Cut resistant S-TEX liner (steel/polyester ,nylon). Sizes: 6 (S) - 10 (XXL)
Chemical resistant glove for precision and medium duty work. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 18gg nylon liner for high fingertip sensitivity in difficult conditions. Sizes: 7-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.
Sturdy blue single use glove in 100% nitrile with rolled edge. Completely powder-free and free of natural rubber. With textured fing ers. Food suitable. Suitable for medical examination. Sustainable packaging.
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Warm, insulating gloves with acrylic/nylon liner with PVC coating. PVC-foam coating stays flexible in cold temperatures, food approved. Industy leading combination of comfort, warmth and dexterity.
Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.
Chemical resistant glove with cut protection for precision and medium duty work with cut risk. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 15gg para-aramid lining. Sizes: 7-12. Complies with: EN388:2016 4.X.4.1.C, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 Virus.
Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.
Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.
resistant to 350°C. Perfectly cut resistant so ideal for commercial kitchens, processing hot items and in all industries which present cutting and heat risks.
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
Seamless glove with impermeable full nitrile coating all over the hand with extra nitrile foam coating finish on the palm for good grip on wet or oiled components. High-abrasion resistance and anti-impact protection on the back of the hand. Unique Showa ergonomic shape that replicates the natural curve of the human hand. High-visibilty green colour for visible hand signaling. Seamless knitt designed to prevent irritation.No Latex. Sizes: 7(M)-10(XXL)
Arc flash protection for the toughest conditions, will not drip, melt or ignite. Made from durable and comfortable materials. Seamless knitted liner of glass fibre, para-aramid, meta-aramid, nylon and spandex with a smooth finish mixed coating of nitrile, chloroprene. With plastisol prints on the back of the hand for extra protection. Sizes: 6-12.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Chemical protection gloves against hazardous chemicals. Resistant to acids, bases, solvents and alcohols. Reach compatible. Length: 38cm, thickness: 0.78mm.
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 10,000 volts, operating voltage of 7,500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 350°C for 15 sec.
Glove with double nitrile coating on a very flexible, thin 18 gauge seamless nylon/spandex liner. The fully coated glove prevents penetration of oils (due to the red smooth nitrile coating) and this without loss of grip (due to the black nitrile foam coating). Highest protection against abrasion in combination with short-term protection against contact heat (100°C). In accordance with: EN388:2016: 4.1.2.1.A, EN407:2021: X.1.X.X.X.X.
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.
Cut-resistant glove with Zirnium with PU coating and reinforcement in split leather between thumb and index finger. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 6-12.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds (tested internally). With thumb hole and Velcro closure on upper arm.
Yellow, soft and comfortable 30 cm gloves in unlined flocked natural latex. Thickness 0.45 mm. Good chemical resistance. Suitable for food processing, agriculture, automotive assembly, chemical industry, pharmaceutical industry.
Liquid-tight glove in jersey with high-quality neoprene coating, 45.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. Hence the great demand for this glove from the chemical and petroleum industry, the transport sector and companies that work with hazardous substances.
Fluid-tight glove in jersey with neoprene coating, 30.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. The extra insulation layer makes the glove ideal for working for short periods with hot liquids at up to 180°C or in a cold environment up to -25°C. A popular model for the petroleum industry, for waste treatment and for the transportation and treatment of hazardous substances! Siliocne free.
Flexible glove in unthoughened vulcanised rubber. Test voltage 30.000 volt, use voltage 26.500 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Finger-sensitive glove with double waterproof nitrile foam coating on a cut-resistant PE carrier. Highly cut resistant. Glove 3/4 coated. Suitable for all operations requiring high finger sensitivity such as assembly, packaging, automotive, steel and glass industry, ... Sizes: 7-11.
Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
This glove offers excellent grip in dry, wet, and lightly oily environments. The single nitrile foam coating on the palm makes the g love soft and comfortable while still providing a secure grip. Cut protection level C and reinforcement between the thumb and index finger. Knitted 18 gg lining with cut-resistant CRF® technology and partially recycled polyester. Touchscreen functionality. Oeko-Tex approved. Sizes: 6-12. Conforms to: EN 388:2016+A1:2018: 4.X.4.3.C
Protection against a wide range of chemicals, acids, caustics, solvents, grease and oil. Constructed with a seamless knit liner (13 gauge) for maximum comfort and endurance. Lenght : 35,5 cm. Sizes: 8-11. In linde with: EN388:2016 3.X.4.3.E, EN ISO 374-1:2016 Type A: A.J.K.L.M.T, EN ISO 374-5:2016
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
Blue split leather glove, winter lined with Scotchgard leather reinforcements in the palm. Thumb and forefinger tips are touchscreen compatible. Protects against temperatures up to -30°C (slightly wet or dry environments). Sizes: 7-11.
- Chemical protection - Triple PVC coating - Very finger sensitive - Seemless knitted cotton liner 13 gauge - Sizes: 8-11 - Length: 30cm - EN388:2016 4.1.2.1.X - EN ISO 374-1:2016 Type B: AJK - EN ISO 374-5:2016
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
Cut resistant and comfortable welding glove in reverse goat leather, with Kevlar lining and seams.
Disposable 100% nitrile gloves with beaded cuff. Embossed fingertips for extra grip. Fully powder-free and free of natural rubber, waxes, silicones, or plasticizers. Touch N Tuff offers 3 x more puncture resistant than vinyl and natural latex. Suitable for laboratory work, chemical industry, emergency services, electronics and other precision assembly work. Colors: blue. Sizes: 6.5 to 7/7.5 to 8/8.5 to 9/9.5 to 10. Length: 300mm, thickness: 0,10mm.
Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544
Prioritize comfort and wearer safety with the CS710 chemical resistant gloves. A double-dipped nitrile coating offers robust durability, whilst the seamless liner and natural latex-free composition ensure comfort during long periods of wear. Enhanced grip from the foamed nitrile palm coating provides extra grip, even in oily or slippery environments. Sizes: 7(S) - 11(XL).
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
Purple nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Lined winter glove in goat leather. Open cuff. Thin. Fully lined. Sizes 7-11.
•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending
Knitted glove with HPPE and Zirnium with black PU coating. Extremely good cut resistance. Touch screen function on top of thumb and index. Sizes: 6-12.
Overglove hight voltage in premium goat skin leather for insulated rubber gloves of class 1,2,3 <(>&<)> 4. Offers mechanical protection and extends the life of rubber insulated gloves. With velcro, lenght: 30 cm. Sizes: 8-12.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Chemical protection glove, fully lined, 0,3* mm (*chem-layer) nitrile, fully dipped, sandy finish, 18 gg, nylon, oil and grease resistant, water and oil repellent, for allround work. Suitable for contact with foodstuffs, except for fatty foods. CAT III . In line with : EN 388:2016 4121X, EN 407:2004 X1XXXX, EN ISO 374-1:2016/Type A AJKMNOPT, EN ISO 374-5:2016/Virus .
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Glove with unique and patented knitted design (18 gauge) that allows the glove to tear easily at multiple high risk areas, significantly reducing the risk of hand injury if the glove becomes entangled in a rotating tool. Ultra thin design and nitril foam coating provides excellent tactility to grab even the smallest parts. ZONZ™ Technology offers extreme breathability to keep hands cool and comfortable. The wihte color allows quick identification of dirt to avoid product contamination. Antistatic, latex and silicone free: no transfer of silicone contaminants to metal parts prior to painting. Sizes: 6-11.
Cut and heat resistant arm protector 45 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Synthetic leather glove, Winter-lined, 0,7 mm, Microthan®+, Diamond grip pattern, Polyester, Fleece, Cat. II, Black, grey, yellow, Wrist support, Chrome free, Velcro®, for allround work . EN 388:2003, 2322 EN 511:2006, 21X
Natural latex glove, smooth exterior, lined interior Motion freedom: excellent comfort thanks to lining (no irritating seams). Very high abrasion resistance and good resistance to various acids and ketones. Applications: treatment of frozen foods, vegetable growing, chicken breeding, perfume production, polyester lining, masonry work, inks and dyes production. Length: 31 to 33 cm (depending on size) Thickness: 1.15 mm. Sizes: 5-10.
