BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
The AlphaTec® AquaDri® is made up of two layers to keep your hands dry and to improve comfort and performance. The soft foam coating inside with the Aquadri® technology developed by Ansell offers unrivalled moisture absorption. The superior nitrile film offers advanced chemical protection against accidental exposure to bases, oils, fuels, some solvents, fats and animal fats. The inverted diamond relief on the palm increases the grip on wet and dry objects for an optimum, firm grip in a wet or dry working environment.Antistatic, silicone free and food approved. Sizes: 7-11. Lenght: 38 cm.
Glove with PE and Zirnium. Extremely good cut resistance.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
A flexible glove with cutting, perforation and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and fingertips from needles and other sharp objects. Knitted in cut-resistant HDPE fibre, giving the whole glove protection level 5. Provided with PU coating from fingertips to over knuckles and therefore suitable for cleaning or working in wet conditions. Extremely wear-resistant coating. Sizes: 8-11.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
Talcum powder for electro gloves. Helps when pulling on gloves and absorbs transpiration. No PPE.
Seamless knitted glove in yellow high-viz cut resistant ATA® fibres, with double palm and finger coating in nitile Microfinish®. Excellent cutting resistance and good grip in dry, wet and oily condtions. Available in sizes 6, 7, 8, 9, 10 and 11.
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
• 18 gauge gray Kyorene® Pro graphene liner • Black HCT®-Nitrile Nanofoam coating on the palm •Reinforced thumb hole • Touch screen • No stainless steel or fiberglass • Ergonomically shaped for a superior fit • Bacteriostatic kills harmful bacteria • Heat regulation keeps hands comfortable • Odor neutralization so that the gloves stay smelling fresh Conforms to: EN388:2016:4X42D
Gloves with a supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Good grip in damp conditions. Antistatic Sizes: 8 / 9 / 10, length: 30 cm. Antistatic.
Gloves for all lengthy work activities involving chemicals, heat or cold. Neoprene on a double cotton liner. Temp-Tec 332 can be used for the manipulation of oiled, hot parts up to 250 °C. Available in: blue/black. Sizes: 8 / 9 / 10, length: 35.5 cm.
Supple, comfortable and chemical resistant gloves made of butyl covered with a layer of Viton with smooth finish. Provides exceptional chemical resistance to toxins, alkalis and acid, esters and ketons, UV rays and ozone, hydrogen peroxide, desinfectant solutions, oxidizing chemicals, non-polar hydrocarbons and aromatics, halogenated hydrocargons, and oils and greases. Gastight and latex free. Lenght: 30cm, Thickness: 0.35mm. Sizes: 7-11.
The ideal solution to mitigate static buildup when working with chemicals and liquids in environments with static hazards or high ex plosive risks. High performance Nitrile compound offers a far superior snag, puncture and abrasion protection. Reverse lozenge palm finisch for improved dry and wet grip. Foldable cuff gutter to prevent dripping on the forearm. Antistatic flocking layer for ease of donning/doffing and moisture management. Without Silicone. Sizes: 7-11.
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Biodegradable single use glove, powder free.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
Durable, heat resistant Kevlar glove with heavy coton liner, 35 cm long. Cut resistant and isolating till 350°C.
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Glove with flexible nylon carrier and nitrile foam coating with anti slip design. Glove is very pleasant to wear and thus provides increased comfort. Excellent grip in oily conditions thanks to the foam nitrile coating with anti-slip design. Available in sizes 6, 7, 8 and 9. In line with EN388 3.1.2.1.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin, Full grain goatskin, Reinforced index finger and reinforced seams.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Cut resistant glove on seamles knit liner in renewed HXFIBRE (18 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 12.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Seamless cut resistant glove with double nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Cut resistant S-TEX liner (steel/polyester ,nylon). Sizes: 6 (S) - 10 (XXL)
Seemless knitted glove 18 gauge with nylon, spandex, carbon fibres and a FORTIX™ foam nitrile coating on the palm. This glove has ES D-functionalitye certified to EN16350, protection products against electrostatic discharge. It is also touchscreen compatible and dermatologically approved by Dermatest and certified by OEKO-TEX®. The nitrile foam coating offers excellent grip and long lastingprotection. The careful selection of materials, the Ansel ZONZ™ Comfort Fit Technology and proprietary washing process makes the HyFlex® 11-819 a clean, ultra breathable and highly comfortable glove. The glove is latex and silicone free, and laudryable at 40°C. Sizes: 6-11.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
A warm and durable glove in our Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Chemical glove for precision and medium duty work in cold conditions. Dipped in a two-layer liquid proof NBR/PVC blend. 35 cm long safety cuff. 18gg nylon liner combined with an acrylic winter lining for cold environments. Sizes: EN388:2016 4.1.4.1.X, EN511: 0.2.1, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
This glove is specially designed to protect against liquid gases at very low temperatures. The Gore-Tex membrane ensures water-tightness. American assembly. The cowhide leather is oil and water repellent and heat resistant. The glove has a 20 cm long cap-cuff and is lined in wool.
5-finger glove with palm in split leather and aluminized back. Wool lining. Kevlar seams. Glove with contact heat up to 100°C. Materials are resistant up to 250°C. Length 40 cm.
The full nitrile coating repels oil and liquids keeping hands dry and protected, whilst the new micropore nitrile palm coating ensures excellent grip in both dry and oily conditions. Conform EN3 88: 2016 level E cut resistance in such a fine touch, lightweight glove is unrivalled in the market place. Available sizes: 6-11.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam/aqua PU in the palm with longer cuff. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Thin and comfortable shock-absorbing glove with cushioning Poron material in the palm and on the underside of the glove.
Class 2 welding protection, elasticated cuffs for a secure fit, designed to be worn in a harsh working environment, designed with a comfortable fit, CE certified, this product is sold in pairs, UKCA marked. Outer fabric: split cowhide, thickness 1.3 mm Sizes: one size Standards: EN ISO 11611 Class 2 A1
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
The SHOWA 8005PF is designed for jobs requiring increased protection without compromising on comfort and tactility. A rolled cuff prevents dirt from entering the glove and allows for easy removal of the glove in case of puncture. The glove is ambidextrous and uses second-skin feel to significantly reduce hand fatigue over long periods of wear. Powder and latex free, food approved. Sizes: S(7)-XL(10).
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass.
Leather glove, Unlined, 0,6-0,7 mm, Full grain goatskin, Nylon, Cat. II, Blue, white, Elasticated 180°, for fine assembly work . EN 388:2003, 2010
Soft yet robust technical liner, engineered to offer protection against the cold and heat, as well as cut level A4/D protection Exceptional anti-wear properties and double protection against thermal hazards. Extremely durable latex coating with increased resistance around the thumb for extended use. Conform EN388:3X43D EN511: X1X EN407: X2XXXX
Liquid-tight, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Light seamless glove with micro-porous nitrile coating on the palm (0.84mm). Finger-sensitive with good grip on wet or oiled components. Ultralight (19g) Microfibre carrier. Latex-free. Sizes: 6(S)-10(XXL)
Cold insulating glove with foam insulation and PVC coating. The roughened finish provides excellent abrasion resistance. This fluore scent, supple and ergonomically shaped model features a protective cap and is completely impervious to liquids. It is also dirty, fat and water repellent. Ideal in the chemical and petroleum industry and for work in cold stores, ports, public services or other env ironments where protection against cold is required. Anitstatic. Length: 27.5 cm.
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
Extreme chemical protection: MICROCHEM™ multi-layer barrier. Utilizing unique rubber polymer and plastic laminate technology for extreme protection against a wide range of chemicals. Approved for contact heat up to 100°C/212°F, antistatic according to EN 1149-3 standards and made without natural rubber or silicone, for protection against mechanical risks and allergic reactions. Comfortable unique manufacturing process and nylon liner support for more comfort during use
Lined finger-sensitive nitrile cap gloves with a grip coating according to the new Grip Technology. Very good physical properties and good grip even in oily and damp/wet conditions. Top finished with straight edging. Sizes: 8 / 9 / 10, Length: 280 mm.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.