BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Dark blue disposable gloves in nitrile. The profile guarantees excellent grip in dry or humid conditions. Un-powdered. Weight (size M): 4.6 g / Thickness: 3.5 mil, 0.09.-0,12mm). Applications: Light chemical applications in labs, assembly, product control, food sector. Tested for food contact for 2 hours at 40°C (10/2011). Available sizes: S-XXL.
Glove with extremely smooth and efficient carrier nitrile foam coating. Glove gives very pleasant feeling and thus provides increased comfort. Excellent grip in wet or oily conditions thanks to the foam nitrile coating. Conform: EN388: 4.1.3.1.X, EN 407 X.1.X.X.X.
Fully seamless, grey, knit gloves withgreyPU coating on a white Dyneema® liner. Available in: grey/white. Sizes: 8 / 9 / 10 / 11 / 12.
Fully seamless, grey, knit gloves with grey PU coating on a white HPPE / Lycra liner. Available in: grey/white. Sizes: 7/ 8 / 9 / 10 / 11 / 12.
Seamless glove in nylon / polyester with polyurethane coating on the palm.Good wearing comfort because of large breathing ability, a perfect fit and optimal sensitivity. Suitable for packaging industry, assembly,electronics, inspection, painting. Sizes: 7-11.
Sturdy glove made of 100% nitrile with rolled cuff. Completely powder-free and free of natural rubber, wax, silicones or softeners. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Cut resistant glove without seams with silicon-free PU coating. Wrist and forearm protection thanks to a long 15 cm cuff. The coating gives a very good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, due to very dens knitting, a very high cut resistance. Usage: Situations where adhesion, cut resistance, tear and perforation are required, such as packaging, assembly, the automotive industry, the glass and paper industry.
The lightest and most comfortable cut resistant glove (18 gauge) thanks to the use of Dyneema Diamond Technology. A perfect synergy of high sensitivity, cut resistance and comfort. This glove has an excellent performing thin nitrile foam coating (without silicones) with an exceptionnal grip on oiled or slippery surfaces and gives contact heat protection upto 100°C. Thanks to its light weight and the Dyneema® Diamond fibre, your hands stay well ventilated and get a "cool" grip. No use of glass fibre or any other external cut resistant fibres so the cut resistant properties remain intact. Ideal for use in applications such as assembly of thin parts or montage. Available sizes: 7-11.
Sturdy glove made of nitrile and neoprene with rolled cuff. Powder and silicone free with special inner layer for fast and smooth donning. Chemical disposable glove.
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: grey, white. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (18 gauge) with insulating layer nitrile foam/aqua PU in the palm, with extra coating between thumb and forefinger.Heat resistant up to 100°C contact heat. Sizes: 6-11.
Very flexible and seamlessly knitted glove with a black nitrile foam coating. Nylon/spandex liner and thin nitril coating give improved ventilation and comfort and very steady and dry grip in humid and oily conditions.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 1mm, Lenght: 350mm Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C). Class 0 Yellow offers arc flash protection Class 1 in accordance with the EN 61482-1-2²
Glove with extremely flexible and thin liner in stretch material with high-performance nitrile foam coating. Glove gives a very soft, cool and pleasant feeling and ensures breathability (sweat is quickly drained) for excellent wearing comfort. All materials of the glove are Oeko-Tex certified. 15 gauge Glycose / Glycerol sustainable liner Production of this liner reduces the CO2 emission with 67% compared to standard nylon. Solid grip in dry and oily circumstances. Touch-screen functionality. Protection against a short contact heat of 100 ° C. Available sizes: 7-11. Conforms to: EN 388: 2016: 4.1.2.1.X and EN 407 X.1.X.X.X.X.
knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.
Ultra-thin glove in 100% nylon with a Polyurethane (PU) coating. The 18 gauge carrier offers incredible comfort, finger sensitivity and feels like a second skin. The PU coating is silicone free and does not create contamination on painted objects. Lightweight so hands are well ventilated. Very abrasion resistant coating. Ideal for applications in dry conditions, such as light assembly, precision tasks, light logistic activities. Due to its full black colour, this glove is ideal for contaminated environments. Available sizes: 6-11.
Winter knitted polyamide glove in black colour. Complete coating in nitrile foam. Hand palm with nitrile dots. Foodapproved.Length 26 cm. Sizes: 7 - 11.
Cut protection and contact heat protection up to 100°C (15 sec) with unique design at the hand so that the sleeve stays in place and does not curl up.
Flock-lined nitrile gloves with sandpatch finish for a good grip and tactility when handling wet objects. Good protection against all commonly used solvents and resistant to abrasion.
Cut resistant, completely seamless grey knit gloves with grey PU coating. Excellent tactility combined with highest level of cut protection. Sizes: 7/8/9/10/11. Suitable or: circumstances in which a good grip and cut, abrasion or puncture resistance are required, such as packaging, installation, assembly, automotive industry, glass and paper industry.
Sturdy glove made of 100% nitrile with rolled cuff. Lightly powdered and completely free of natural rubber proteins. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
The ever popular medium weight cut level E 50 range is evolving into upgraded equivalent styles with higher specification providing incredible level F cut protection to EN388:2016. EN388: 2016 maximum level F cut resistance; Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 2 F; High level of abrasion resistance; Dry PU palm coating provides secure grip; Dark colour liner hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
Gloves made of sturdy, top-quality cowgrain leather. Driver Vachette has a perfect fit, reinforced seams along the fingers and high tactility.
The lightest and most comfortable cut resistant glove thanks to the Dyneema® Diamond fibre and technology. A quality combination of high sensitivity, cut resistance and comfort. The Dynablade PU Light has a polyurethane (PU) coating which gives you exceptionnal grip. Thanks to the special Dyneema® fibre your hands are kept cool and ventilated. A no use of glassfibre guarantees a longer duration of its cut resistant properties. If you work in applications such as assembly, packaging or logistics, this glove is a must have. Available sizes: 7- 11.
Goat leather gloves of top quality with cotton back and reinforced seams. A perfect fit and high tactility make these gloves a real favourite. Tropic is available in two versions: Tropic (top quality) and Tropic EC (standard quality).
Cut resistant glove made with the latest Dyneema® Diamond technology and a gray, abrasion resistant PU coating. Guaranteed cut resistance (level B) combined in a lightweight glove. (up to 30% lighter). A "breathable" glove, finger-sensitive and a good grip make this a comfortable "second skin". No use is made of glass fiber. According to EN388: 2016: 4.4.4.2.B
Cut resistant (HPPE) winter glove, completely seamless grey knit gloves with black nitrile coating. Inside warm winter lining. Glove combines dexterity with high cut-resistance and good protection against cold. Sizes: 8/9/10/11.
Lined winter glove with PU palm and waterproof membrane. Back is made of stretchy spandex material in yellow Hi-Vis. Safety cuff. Fully lined with soft fleece material. Sizes 8-12.
Soft cut resistant glove that combines confort and durability and offers a good protection agains sharp objects. The nitrile foam coating is DMF-free and breathable, so the hands of the user stay cool all day long. Touch sreen compatible.Sizes 7 - 12.
These supple and comfortable outdoor gloves are made of water repellent cowgrain leather and fitted with an efficient and elastic 5 cm cuff. Sizes: 9 / 10.
Fully lined, waterproof winter glove with touchscreen function, made of durable synthetic leather. The preformed fit and the back with stretch material make the glove movable and flexible. Hi-vis yellow on the back for good visibility. Reinforced thumb grip and fingertips, elasticated wrist. Good girp on both dry and wet surfaces. Sizes: 7-12. Complies with: EN388:2016 2.1.2.1.X, EN511: 1.2.1. EN407: X.1.X.X.X.X
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on fingertips and seamless lining (15 gauge). Glove meet most electrostatic discharge protection needs providing a comfortable glove.
Seamless glove in nylon / polyester with polyurethane coating on the palm. Good wearing comfort because of large breathing ability, a perfect fit and optimal sensitivity. Suitable for packaging industry, assembly, electronics, inspection, painting. Sizes: 7-11.
"Wonder Grip® Thermo Plus" is fully doublecoated with latex on the back of the hand andincludes a 13-gauge napped acrylic liner."Wonder Grip® Thermo Plus" includes both"Wonder Grip® Aqua" and "Wonder Grip®Thermo"s advantages; therefore, it can be usedin situations requiring dexterity in wet and coldconditions.Furthermore, "Wonder Grip® Thermo Plus"maintains dexterity and comfort while keepingthe hands warm. Sizes: 7(S) -11(XXL).
Antistatic nylon gloves (24 cm) with foamy insulating layer nitrile on the palm. KnitzonzTM technology increases flexibility and comfort in congested areas, which means less fatigue. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Latex and silicone free. Sizes: 6-11.
Glove with palm in goat leather.Back and cuff in cotton. Kevlar liner in the palm. Protects against heat from sparks.Sizes : 8/9/10/11
Winter glove with a gray nitrile coating and warm acrylic lining. This glove is fully coated wiith a high dexterity and outstanding wearing comfort. Unique glove that can be used widely since it combines different levels of protection. It offers basic protection against cutting risks (level B), but can also be used for short contact with hot objects up to 100 ° C (EN407) and for work in cold environments (EN511). Use for general applications in colder environments. Available sizes: 7/8/9/10/11. In accordance with EN388 2016: 4.2.3.2.B, EN407: X1XXXX and EN511: 020
Seemless knitted glove in warm and comfortable acryl .Nitrile coating with PVC dots on the palm for a good grip. Touch screen compatible. Food approved. Protects against cold (0°-10°C) as well as heat (100°C for 40sec. and 250°C for 14sec). Sizes: 6,7 and 8 (turqoise) and 9,10 and 11 (ocean blue). Lenght: 26cm.
Nitrile coated gloves with a tricot cuff that fits closely around the wrist. Nitrogrip Light is extremely supple to wear and provides both fine tactility and a good grip. Sizes: 8 / 9 / 10.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Half nitrile coating on the palm with sand grain finish for extra grip. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.D.P
Unique combination of allergy prevention and comfort. The new NeoTouch gloves are the first industrial neoprene gloves for one-time use. They are an ideal solution to protect employees against type I allergies. Since they are also powder-free, they also reduce the chance of dermatitis for the user. The gloves are highly resistant to acids, bases and alcohols and provide the same comfort as latex gloves. The NeoTouch gloves have a polyurethane inner coating for easy donning. The protective surface (resistant to acids, bases and alcohols) is larger and the gloves form a better seal against the protective clothing. Sizes: 6.5 - 7 / 7.5 - 8 / 8.5 - 9 / 9.5 - 10 / length: 290 mm.
Samurai® glove made with innovative cut-resistant Bio based Dyneema® Diamond fiber, which is partly sustainably produced based on wood pulp. Palm dipped with nitrile foam coating. This glove combines high cut resistance (class C) with excellent finger dexterity. This glove is Touch Screen compatible. Application: Fine assembly, inspection, logistics activities, machinery operation. Complies with: EN388:2016: 4.4.4.2.C
Seamless glove with nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Cut resistant glove without seams with black silicon-free PU coating. The coating gives a good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, dueto very dens knitting, a very high cut resistance. Usage: Situationswhere adhesion, cut resistance, tear and perforation are required, suchas packaging, assembly, the automotive industry, the glass and paper industry.
Durable gloves for all extended tasks in cold conditions. 3/4 nitrile coating on seemless polyester lining. Completlely lined with acryl. Sizes: 7 / 8 / 9 / 10 / 11.
Sturdy glove, for limited use, made of 100% nitrile with rolled cuff. Long version (30 cm), unpowdered and completely free of wax, silicones or softeners. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Nitrile gauntlet gloves, lined with Intercept™Cut Resistance Technology that provides ISO C cut protection. Nitrile barrier provides advanced chemical protection from many frequently used chemicals. With new Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort. Finished at top withstraight-cut opening. Antistatic and suitable to use in foor environments .
PVC glove on cotton support, seamless knitted with complete PCV coating. Length: 300mm. Thickness: 1,63mm. Sizes: 8/M-11/XXL.
Unique combination of allergy prevention and comfort. The first industrial neoprene gloves for one-time use. Ideal solution to protect employees against type I allergies. Powder-free, for reduced chance of dermatitis. Excellent resistance to acids, bases and alcohols. Offer the same comfort as latex gloves. Polyurethane inner coating for easy donning.
Comfortable, cut resistant glove using the unique Dyneema® Diamond Technology. Its 13 gauge lining has double the cut resistance in comparison with a concurrential glove, but keeps comfort at a high level (high sensitivity and a cool feeling). It has a polyurethane coating with high grip and without silicones. Cut resistant properties are guaranteed because no glassfibre is being used. Perfect for use in dry environments with high cut risks such as paper and glass industry, assembly or logistics. Available sizes: 7-12.
Glove with double nitrile coating on a very thin and supple lining in nylon/spandex. The double coating protects the palm and ¾ back from penetration of oils (red nitrile coating) without loss of grip (black nitrile foam). Highest protection in combination with excellent comfort! EN407:2020: X1XXXX
Budget-friendly glove with black PU coating, large size range.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides good grip. Impact-resistant backhand, 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level E, approved for contact heat level 1. ESD approved and food safe. Oeko-Tex approved. Touchscreen. Sizes : 6-12.
Blue knitted food approved glove from the Revillet range (per piece) in stainless steel and glass fiber with knitted cuff. This glove has excellent cut resistance, tested according to TDM standard. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5 on demand.
Barehand-like comfort and tactility with high durability glove on 18 gauge Spandex/nylon liner with ultra-thin nitrile foam FORTIX™ coating. Silicone-free, latex free, antistatic. Sizes: 6-11.
Fully seamless knitted glove with a black PU coating on a blue 15 gauge liner (HPPE / Polyester / fiberglass). High sensitivity, elastic, extra thin and a good grip. Sizes: 7/8/9/10/11. This glove offers the highest comfort combined with an average cut resistance level (class B). Touchscreen. Applications: General all-round work glove, light assembly, logistics., Transport and storage. In accordance with: EN388 3.X.4.2.B
Economical solution for light applications where a durable coating and firm grip is required for working in greasy conditions. The double-layer nitrile coating with a roughened finish keeps hands dry and comfortable, and provides a good grip. Fully coated glove on 13 gauge polyester liner. Sizes: 6-11. Conforms to: EN388: 2016 4.1.2.1.A
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The coated knuckles and the double coating in the palm provide excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Secure grip gloves with nitrile coating. The liquid repellent nitrile coating sheds oil, grease and dust. The open cotton back of the glove provides extra ventilation. Sizes: 9 / 10, with 7 cm protective cuff.
Lined, nitrile gauntlet gloves with new Grip Technology. Inner and outerlayer of nitrile rubber. Extremely good physical characteristics andgood grip, even in wet and oily conditions. Finished at top withstraight-cut opening, with seamless knit nylon liner. Food approved. Antistatic, without silicones. Good chemical resistance to greases, oils and hydrocarbons.
Light and thin glove made of seemless knitted nylon/carbon fibre with micropourous nitrile coating. Especially for touch-screen and ESD applications. Sizes: 6-11.
Supported blue natural rubber glove. Seamless made for comfortable wearing. Wrinkled finish on the hand for perfect grip in wet and dry conditions. Very smooth and very good dexterity. Ideal for use in the fishing industry, oyster fishing, cleaning, chemical cleaning, wet and dry use and general use with food.
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
Unpowdered latex gloves with high tactility. Universal model that can be worn on either the left or right hand. Ideal for protection of delicate products, for light maintenance and as protection of the hands against irritating products.
Gloves made of black neoprene, flock-lined with cotton for perfect absorption of moisture from perspiration. With diamond pattern finish for good grip in dry and wet conditions. Sizes: 8 / 9 / 10 /11, length: 33 cm.
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
Glove in water-repellent cowhide leather that should be worn over electrical gloves as mechanical and puncture protection (not mandatory for composite models). More spacious model that easily fits over electrical gloves with a velcro closure for an ideal fit. Check the technical datasheet to determine the correct size.
A real innovation within hand protection thanks to the use of new Black Dyneema® Diamond Technology. This new technology grants the Dynablade Foam Black a hight cut resistance level 5 without use of any other cut resistant fibre such as glass fibre or steel. All of this results in a unique and comfortable glove (13 gauge). It has a high performance foam nitrile coating (without silicones) with exceptionnal grip on oiled or slippery surfaces. Thanks to the Dyneema Diamond fibre your hands are well ventilated and the glove receives a "cool" grip. The black colour of the glove makes it a perfect solution to be used in grimy environments. Perfect for use in applications where a high cut resistance is needed, such as assembly of thin parts. Available sizes: 7-11. In line with EN 388 4.X.4.2, ISO 13997 Class D.
High Cut resistant glove with Nitrile Coating * High dexterity / 18 gauge * Reinforecement between thumb and index finger * Touch Screen functional * Made from black Kevlar * Highest cut resistant class F * Short protection against contact heat up to 100°C
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 2,500 volts, operating voltage of 500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Ultra thin insulating gloves for electricians made of 100% natural rubber latex. Length 280mm. Arc Flash classe: APC1. REACH compliant.
