BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Foldable mask, class P3 for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. With handy lips to unfold the mask easily. Fitted with non-adjustable, elastic woven headbands. Masks packaged separately. This mask does not contian any components of latex rubber, or PVC. NPF: 50.
Put togehter with pre filter SR221 on gas, particle, or combined filter. Use also for fit test.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve for lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands with closure.
Comfortable half mask in rubber with double perfectly adaptable strap. Covers the nose, mouth and chin. Maximal confort because of two exhalation valves that keep the exhalation resistance low. With threaded connection EN 148 for screw-on filters.With quir adjustable strap and magnetic buckle on the neck strap. Not for filters > 300g. NPF: dependent on the filter used.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate with silicate coating, provides very wide field of vision (95 %). Speech is conveyed via the speech membrane, which provides clear speech transmission. Speech membrane is positioned so the filter is not in front of it. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling. Also available order in size small or in silicone rubber.
Foldable mask, class P3 for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Masks packaged separately. This mask does not contian any components of latex rubber, or PVC. NPF: 50.
Folding mask, class P2, for harmful dust. Comfortable 3-piece folding mask. With non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 10.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
The SR 900 half mask is made of thermoplastic elastomer (TPE) and polypropylene (PP) in three sizes, S, M and L. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The half mask SR 900 is used in combination with: • Filters from the Sundström range. • Remote filter holder SR 905 according EN 12083. • The SR 307 or SR 507 compressed air attachmnet which then serves as a breathing apparatus with continuous flow for connection to a compressed air supply according EN 14594:2005. • The fan unit SR 500/SR 700 and approved filters included in the Sundström fanassisted respiratory protective device s ystem conforming to EN 12942:1998. A pre-filter holder is supplied. Best stored in box SR 230 or storage case SR 339.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
Comfortable half-mask in rubber, with unique sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Wide field of vision due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. Various classes of the Gobi series can be distinguished based on the different colours of filter material on the inside of the mask. NPF: 10.
Peel-off protection foil 9993 for screen of full facial mask series 9000.
Visor protectors for mask TR-82/TR-2002 (BRK 820). Visor protectors made of acetate that protect visor against scratches and spatters.
Mask made of skin-friendly silicone rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speech is con veyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupli ng.
Interior mask with nosepiece valve for full facemask 6800.
Full face mask in TPE with visor in polycarbonate anti fog, with filter connection EN148.NPF depends on used filter, 2000 with motorunit T-Air. When used with motorunit, the hose 1046652 needs to be ordered separately In line with EN136-2; EN12942
The SR 100 half mask is made of silicone in three sizes, i.e. S/M, M/L and L/XL. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA and BGA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The mask is used either as a filtering device in combination with filters from the Sundström range, or in combination with the SR 307 compressed air attachment which then serves as a breathing apparatus with continuous flow for connection to a compressed air supply. A pre-filter holder is supplied. Best stored in box SR 230 or storage case SR 339. Sizes: S/M, M/L, L/XL.
Foldable mask, class P1, for irritating dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 4. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.
Comfortable half mask in TPE with integrated and replaceable particle filters. for anti-odour protection against nuisance odour, dust, all types of fumes, oil and water mists and micro-organismes. Light weight, silicone and latex free. Sizes: S/M and M/L.
Comfortable half mask in TPE with replaceable ABE1P3filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of half-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 225 x 125 mm.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a car ry strap for hanging the mask around the neck. Features click connection for demand valve with quick-coupling Automaxx-AS.
Dust mask, class P3, for toxic dust and nuisant levels of acid gas benath the TLV. Mask with nose bridge and seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask during use. Fitted with non-adjustable, elastic headbands. NPF: 50.
Large sized full face mask made of high quaulity elastomere. Can be used as a negative pressure mask with standard connection screwfilters and is also compatible with the 3M Versaflo TR-600 ane TR-800 powerd air systems including particulate, gas and vapour and combination filters. The PC visor provides a good field of vision and the front-mounted speech diaphragm helps provide communication. The 5 point rubber head harness helps provide a secure stable fit and the side-fitting filter and clear inner mask help ensure good downwards visibility.
Pre filter holder for fan unit SR500 EX.
Plastic carry bag with belt for protecting half masks against dust and dirt. Can be worn over the shoulder or around the waist. Suit able for: processes involving chemical risks.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
Particle-filtering folding mask with exhalation valve, protection level FFP2. Ergonomically adapted for large face shapes, innovative design with optimized shape, soft material edges for high wearing comfort. Continuous adjustable head band for a comfortable and secure fit. Inidvidually packed. Flexible and adjustable nose clip, compatible with Uvex eyewaer. Soft sealing lip (nose area) guarantees a secure comfortable sealed position of the mask. Activated carbon filter for odors, gases, and vapors below limit value.
Rubber hose with female and male standard threaded connection EN 148-1. Connects between filter and mask. Allows filter to be worn on the hip (in combination with separately supplied belt 1002677).
Reusable FFP Mask with a very low breathing resistance. AirWave® Pleated Filter for comfortable breathing and fatigue-free work. Longer use time, less consumption ProValve: Built-in valve, reduces condensation from exhaled air. Comfortable full-face seal made of washable TPE material which is gentle on the skin. DuraMesh®: strong and durable structure, keeps the mask in shape. ActivForm®: no nose clip needed Length-adjustable loop strap with clip for quick, simple and safe on and off. Single packed, 5 pieces in box. Tested and certified to EN 149:2001+A1:2009. All Moldex products and packages are 100% free off PVC.
Cover for expiration valve for full face masks of the 6000 series of 3M.
Silver coloured, metal glasses frame to click into 3M series 6000 and 7000 masks, corrective lenses not included.
Test liquid for performing fit test. Content: 55 ml.
User-friendly full face mask with filter connection on the side (standard thread - EN148-1), easy to adjust headband. Suitable for use with 3M powered breathing systems.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50. Planet version, manufactured from 26.5% recycled material.
Very light and compact mask. The cartridges are profiled to give a perfect field of vision. Featuring a quick release harness with a djustment points for optimal comfort. The inner half-mask has 2 inhalation valves to prevent fogging. Mask comes with 2 ABEK1P3 filters that can be replaced.
Full face mask G1 with Maxx connection and F1 helmet adadpters, and visor anti-scratch treated, successor to Ultra Elite mask, light, compact with wide field of vision. Improved air flow in the mask. Sizes: small, medium and large. Fully serviceable with voice membrane.
Bitter test liquid for performing fit test. Content: 55 ml.
Carrying case for Ultra Elite masks. Equipped with a handy shoulder strap. Ideal for the filter and mask to protect against dust. Dimensions: 318mm x 180mm x 232mm.
Comfortable half mask in TPE with replaceable A1P3filters . Sizes: S/M and M/L.
Half-mask with integrated goggle and pre-filtted and replacebale A2P3 filter. Compact, lightweight and flexible design which adapts and fits perfectly to the face and offers a unique and innovative combined protection, reducing risks of non-compatibility, non-conformity and mist build-up. Large central non-return exhalation valve which reduces the breathing resistance for the user and keeps moisture build-up inside the mask to a minimum. Filters with low breathing resistance, increase the level of gas protection and have a longer life span.
Comfortable TPE half mask, with replaceable low profile ABEK1P3 filters. Protects against most organic and inorganic gases and vapours, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives, toxic dust, mist and smoke particles, and micro-organisms. Replacement filter: 1061777
Welding lens attachment for 3S full face masks. Spatter and welding lenses not included. Dimensions: 90 x 110 mm.
Adaptor to "park" lung demand valve Automaxx AS when not in use. Can be fixed on belt of bretahing apparatus.
Foldable mask, class P2, New Generation for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. With handy lips to unfold the mask easily.Fitted with non-adjustable, woven elastic headbands. Improved Cool Flow Comfort exhalation valve provides even lower exhalation resistance and lower levels of CO2 and moisture in the mask. Masks packed separately. This mask does not contain components of rubber latex or PVC.NPF: 10.
Individually packed dust mask, class P2, for harmful dust. Form- retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the mask always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands. NPF: 10.
Plastic carry bag with belt for protecting full face masks against dust and dirt. Can be worn over the shoulder or around the waist.
Plastic carry bag with belt for protecting full face masks against dust and dirt.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Very light and compact mask. The cartridges are profiled to give a perfect field of vision. Featuring a quick release harness with a djustment points for optimal comfort. The inner half-mask has 2 inhalation valves to prevent fogging. Mask comes with 2 A2P3 filters that can be replaced.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that themaskalwaysretains its shape, even when worn for extended periods or after folding the mask. The pleated filter technology reducesbreathingresistance to 50%. Reusable. Fitted with non- adjustable, elastic headbands with closure. Packed per piece. NPF: 10. 149:2001.
Insert for prescription glasses for full face mask Promask. No PPE.
Filter holder including strap to carry the filters of the half mask on the back, making the mask more compact and can be worn, for example, under a face shield.
PVC belt for remote filter holder (1058602).
Storage box for motorunit kit proflow asbestos: 1058093
