BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
NPR36 DRAINCOVER 92 X 92 CM. BLACK NEOPRENE.
Hose for oil absorption. Diameter: 20cm. Length 5m. Absorption capacity 228 litres. 2 items per bag.
Oil absorbing roll for areas with intense pedestrian traffic that require high absorption and tear resistance. Heavy weight, bonded with anti-slip, blocking underlay. Packaging: 1 roll/bag. Dimensions: 18 x 24.4m. Absorption capacity: 104L.
Oil absorbing sock, ideal for absorbing leaks around machines. Dimensions: Dimensions: diameter 7.6cm x 366cm. Packaging: 4 socks/box. Absorption capacity: 43L.
Do-it-yourself kit for creating flexible fluid barrier. Barrier made of flexible material for use in any situation. Reverts back to original form, even if a forklift truck drives over it. Kit includes 2 sections of 7.6m, 4 corners and 6 silicone tubes for securing the barrier.
Bac de rétention en polyéthylène, pour 1 IBC, capacité de 1100 litres, sans grille et avec évidement pour une vidange facile. Mobile sur 4 côtés. Dimensions : 1735 x 1450 x 715 mm. Déplaçable avec chariot élévateur.
Absorbent rolls measuring 7.6 cm x 17 m. These heavy-weight rolls are packaged in a box. Packed with 30 clips for creating hose of the required length. These absorb all industrial liquids, including oils, water, solvents and coolants. The great flexibility of the socks allows them to be easily placed around machines. Absorption capacity: 53 litres.
Measuring tube to be used in combination with hand pump to measure concentration.
Hot-dip galvanized drip-tray, capacity 440 litres, half-grille, U-shaped feet of 100 mm. Dimensions: 1350 x 1220 x 1913 mm, including feet. Weight: 120 kg.
Testgas Isobutylene 100PPM cylinder 34L. Only for use in combination with pressure reducer.
Safety helmet made of ABS. With 4-points suspension 'Staz-on' in textile (52-64cm), with a highly absorbent textile sweatband. Vented. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange, gray, black. Weight: 400g.
Fire fighting sign - Fire alarm in polypropylene. Dimensions: 100X100mm. Not PPE.
Fire fighting sign - Extinguisher hose in polypropylene. Dimensions: 148X148mm. Not PPE.
Mandatory sign - Eye protection mandatory in aluminium plate. Dimensions diameter: 315mm. Not PPE.
Rescue sign - Assembly point during emergencies in polypropylene. Dimensions: 200X200mm. Not PPE.
Mandatory sign - Safety gloves mandatory in aluminium plate. Dimensions diameter: 100mm. Not PPE.
Prohibition sign - No smoking in aluminium plate. Dimensions diameter: 100mm. Not PPE.
Prohibition sign - No fire, open flames or smoking in polypropylene. Dimensions diameter: 100mm. Not PPE.
Mandatory sign - Hand wash mandatory in aluminium plate. Dimensions diameter: 100mm. Not PPE.
Industry role according to european eco label. 100% pure, 2 layers. Dimensions: length: 350m, width: 24cm. 1000 sheets. Package: 2 roles per box.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
This locking kit for hand-wheel valves includes locking systems for hand-wheel valves in 5 sizes, in a practical red carry bag with shoulder strap.
Disposable bucket liner - 10 pack with twist ties. Fits any bucket 298mmx254mm high.
Black compressed air hose, 5 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Black compressed air hose, 10 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Red galvanised steel plunger can. Contains: 1L.
ADR2005 The agreement provides that carriers of dangerous goods are obliged to conduct their trucks to be equipped with the necessary safety equipment such as a intervention kit for spilled liquids. Includes everything you need: Absorption Material for the removal of any oil, gloves and waste bags for disposal of used sorbents. Compact: Requires little storage space, fits easily behind or under the seat of a truck. PPE category is not applicable.
Anti-static absorbent pads on 76 cm x 46 m sized roll, sheets doubly perforated every 46 cm. These heavy-weight perforated pads on a roll are packaged in a box. Available per roll. These pads are made of 1-ply melt-spun polypropylene with 2-ply spun non-woven fabric for extra tear resistance. Can be used for cleaning parts. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 140 litres.
chemical risks.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 9L.
Bag for tools that can be attached to harness. Made of solid plastic with transparent section for easy use at height. Content 7.4L.
Store drums outdoors, protected against direct weather and unauthorised access. Ideal for the storage of corrosive substances packaged in 200 L drums or small containers. Dimensions 1565 x 1620 x 2110 mm. Absorption capacity: 270L. Weight: 147kg.
Breaking knife for right and left-handers in black plastic with pocket clip. The red slider is secured at the back. NOT PPE! Replacement blades: 1021547.
Very robust fall-prevention device with winch, 25 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 23 kg.
Rescue fork extendible to 4.8m to work from a distance, and allow a person who has fallen descend with a fall-block Ultra-lok RSQ. The descent button can be operated remotely.
Winch for descents or rescue. Max load 204kg. To be used in combination with Davit-system or AM100 tripod. Handle to be used in 2 different ways (reduction 4 and 9:1). Best used in combination with suspension harness. To be used in confined spaces.
Very robust fall-prevention device, 9 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 9 kg.
Polypropylene ISO Safety Sign - Emergency exit (right)
Kit with ABS holder in white and red letters. 10 cards in polypropylene for ladder inspection. 1 permanent marker. All marking in FRENCH.
Aluminium bottle of 34 liters with 2 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%).
Aluminium bottle of 58 liters with 2 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%) in N2.
Testgas CO 100PPM aluminium cylinder 112L. Only for use in combination with pressure reducer.
Red backpack in Plan design Space and attachment belts for oxygen bottles of 0.8/1.0/2.0 litres Including inner bags This is a very tough, good quality and easy-to-use bag with ergonomic handles and straps which is very comfortable on the back and shoulders. Dimensions: 48x54x25cm.
Plastic blue mini-container, 72x58,5cm, height 115cm
Hi-vis vest, 100% polyester, mesh.
Drum for collecting water during a test/maintenance of emergency shower. Measures/checks flow rate.
Escape hood with COP2 filter, provides protection against smoke fromfire, among other things. Easy to put on, even for people who wearglasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in bag to be combined with belt. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Face shield in black etched metal mesh. Designed for use with V5 visorsystem for attachment on 3M™ G3000 of G22 Series helmet. Ideal for forestry.
Used to depressurise the bottle permanently dedicated to the destruction or recycling. Enables secure transport.
Aluminium bottle of 58 liters with 5 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2,2%), O2 (18%) in N2, 25PPM H2S, 100PPM CO, CO2 (0.5%)
Rescue and descent device with rotating wheel and 9.5 mm kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims. Suitable for rescue operations in hard to access locations and heights.
USB charger Twig, without adaptor for device. Not PPE.
