BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Drum for collecting water during a test/maintenance of emergency shower. Measures/checks flow rate.
Escape hood with COP2 filter, provides protection against smoke fromfire, among other things. Easy to put on, even for people who wearglasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in bag to be combined with belt. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Cone made of polyvinyl chloride, for cordoning off areas andtraffic control. Equipped with sturdy non-slip base. Length: 50 cm. Colour: yellow/black.
Used to depressurise the bottle permanently dedicated to the destruction or recycling. Enables secure transport.
Aluminium bottle of 58 liters with 5 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2,2%), O2 (18%) in N2, 25PPM H2S, 100PPM CO, CO2 (0.5%)
USB charger Twig, without adaptor for device. Not PPE.
Gas detector reusable O2 and H2S with shock resistant casing detects H2S, CO, O2 and % LEL simultaneously. Standard with built-in pump, data logging and event logging. Half-yearly calibration required. Power autonomy: Approximately 13hrs. Includes rechargeable batteries and charger. Sensors to be replaced after 2 years Sensors must be switched off. Concentration still visible on the LCD display. Registration of STEL/TWA exposure. Measurement results can be read off via USB cable. Versions with LEL sensor are calibrated for methane. Sensitivity to other explosive, hazardous substances can be set. Alarm values: O2 19.5%-23.5%. Compatible with Micro Dock II.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use; if horizontal: 2-metre anchor loop must be used (Art. 1026475).
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for extremely sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Spare blades for safety cutter Klever X-change Kurve (Art: 1025685). To order by 25 pieces (= 1 pack).
8-layer gauze pads measuring 5X5cm. 100-item packs.
3.8x7.5cm, textile, elastic
The Respirex Hazbag is designed to contain a contaminated suit. It is manufactured from Chemprotex™ 300, a high performance chemical barrier material, and measures 1050 x 1370 mm. The Hazbag is supplied with a strong cable tie for sealing the neck of the bag. The facility to mark the bag is also provided by means of a tag and plastic wallet on the cable tie.
• Effective anti-fatigue mat available in two variants: 1. Bubble mat (100% natural rubber) 2. Bubble mat Nitrile (75% natural rubber/25% nitrile) The addition of nitrile ensures excellent resistance to oils and chemicals. Both variants have a raised, bobbled surface to stimulate the blood circulation• Available as complete mats or interlocking parts for longer mats• Product height: 14 mm
* Durable diamond surface resistant to PVC flooring* Self-cleaning top layer provides resistance to many industrial chemicals* With bright yellow edges* Supplied with sloping edges* Product height: 14 mm
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Foreseen with a blue mirror polycarbonate lens with a antivapor and anti scratch coating.
Replacement power adaptor for 5 GasAlert-devices.
Ergonomic gel, wrist-rest provides comfort and support for wrist pressure points to eliminate pressure points - Stylish, transparent gel adds colour to your workplace - Stain resistant, easy to clean with a damp cloth. No PPE.
Smart Suites™ Monitor riser Places the display at a comfortable viewing height to prevent neck problems - Suitable for 21" flat screen displays up to 10kg - Can be adjusted to 3 different heights, for personal comfort. No PPE.
Smart Suites™ Slim-line slim backrest - Graphite slim design that suits contemporary office chairs - The backrest can be placed at the correct height to suit individual needs - Soft material and stitched seams for a modern look - Adjustable strap to keep the backrest in place - 1 year warranty
Apron, 100% cotton, 260gr/m², with bib, big pocket, 100*100cm.
Verticall Roll Dispenser Practical dispensation of 1000 mm sorbent rolls. Features wheels for ease manoeuvrability. Lightweight stainless steel construction.
KWIK-DRAW CHARCOAL FILTER TUBE ADS
Plaster with a detectable strip under the cushioning. Suitable for food industry or anyone who comes into contact with food. The plasters are blue and are easy to spot. Dimensions: 7.5cm x 4cm.
50 rolled standard fingertips.
Empty red First aid kit for car, nylon with zip. Dimensions: 22x14cm. Filled version: 1006110
Sign according GHS03 normation in self adhesive polyester: Risk of oxidising. Size: 21x21mm. 250 pieces per roll. No PPE.
Mandatory sign - Eye protection mandatory in self-adhesive polyester. Dimensions diameter: 50mm. Not PPE.
Plaster with a detectable strip under the cushioning. Suitable for food industry or anyone who comes into contact with food. The plasters are blue and are easy to spot. Dimensions: 50x72mm
Secubox midi without symbol, blue. Dimensions: 236x225x120mm. With fixation material. No PPE.
Cone made of polyvinyl chloride, for cordoning off areas andtrafficcontrol. Equipped with sturdy non-slip base. Length: 30 cm. Colour: yellow/black.
Very light sportive low shoe in microporous washable leather and lining in mesh nylon for more comfort. Outsole in very light material EVA, SRA anti-slip. Sizes: 40-46.
Sweatband in towelling + velcro. Packaged in sets of 20. Not separately certified as PPE.
Interior textile, 6-points with rotating knob. Leather sweatband.
Aluminized fabric front cover offering flame, splash and IR resistance to the helmet and wearer. To use in combination with the G3501 helmet.
Cone made of polyvinyl chloride, for cordoning off areas andtrafficcontrol. Equipped with sturdy non-slip base. Length: 75 cm. Colour:yellow/black.
Hi-Vis yellow anti-static inflatable nylon life-jacket with 300N buoyancy. Suitable for use on or near water in hazardous environments such as refineries and chemical plants or on board tankers.
Hot dip galvanized drain station for 2 horizontal vessels of 200L. Capacity: 440L. Hot dip galvanized half-grille, 2 removable bars, U-shaped feet 100mm. Dimensions: 1350x1220x1200mm, feet included. Weight: 95kg.
Hot-dip galvanized draw-off station for one 200L horizontal drum. Capacity: 200L. Hot-dip galvanized grid without wheels, with feet. Dimensions: 1380x904x1150mm. Empty weight: 135kg
Blue PE barrel funnel for all types of IBC's. Capacity: 20L.
Microflex Hi-Vis Raincoat. 50% Polyester/50% Polyurethane, 170 g/m², High frequency welded seams. 100cm long. Fixed hood with drawstring. Zipper under storm flap with press stud fastening. Sleeves with adjustable snap button closure. Two straight pockets. With reflection. Water column: 8000 . Complies with: EN 343 3.1., EN ISO 20471 2.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW Clip Series, GasAlertMicroClip Series and ConneX1 gas detectors - helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Measuring tube to be used in combination with hand pump 1028962 to measure concentration.
Mefix is a supple and elastic, adhesive bandage, with effective adhesion which perfectly adjusts to the shape of the body. Fixation for dressings, drainage tubes, syringes, etc. Easy to remove protective paper. Dimensions: 5cm x 10m
Mefix is a supple and elastic, adhesive bandage, with effective adhesion which perfectly adjusts to the shape of the body. Fixation for dressings, drainage hoses, syringes, etc. Easy to remove protective paper. Dimensions: 10cm x 10m
Dispensers for 1L refill Estesol lotion or Estesol lotion pure.
Communication adaptor for 3S-P mask.
Dispenser for 2L refill Deb-Stoko Estesol Hair <(>&<)> Body (1034330).
Fall arrest block Rebel 25 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13kg.
Fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use; if horizontal: 2-metre anchor loop must be used (Art. 1026475).
UNIPHOS™ ASP-40 Air sampling pump is a one stroke pump with built-in tip breaker and shard reservoir. This ensures safe and clean working and guarantees a reliable analysis. To use with Uniphos, Kitagawa, RAE, Gastec, Kwik-draw, MSA and Dräger gas detection tubes.
Blue plastic blanket for patients. Dimensions: 80x210cm.
Polyurethane seal plugs for temporary sealing of pipes with a diameter of 50 to 60 mm.
Polyurethane seal plugs for the temporary plugging of drain tubes with a diameter of 70 to 80mm.
Polyurethane seal plugs for the temporary plugging of drain tubes with a diameter of 95 to 110mm.
Topped Parts Pouch has a hands-free, self-closing trap door closure that prevents small parts, hardware, and tools from falling when working at heights. With 2 exterior tool loops. Maximum capaicty: 9 kg. Dimensions: 19x19x30 cm
Microporous hood with exhalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator to combine with T-airline regulator kit. To be used for working with motor unit. In line with EN 14594:205 Class 4A
T-Airvisor® with CP visor, airduct and adjustable head harness. Unique low flow indicator. PE breathing hose not included (1035014) For grinding/paintspraying. To be used with T-air motorunit. In line with En 12951:2005 class 3B
Ready-to-use add-on ventilation unit to improve air flow through safety cabinet. Refreshes the air in the cabinet 120 times per hour. Very quiet and therefore suitable for work environments. Casing in sheet steel with powder coating. Fits all 90-minute fireproof cabinets. Dimensions: W x D x H 200 x 400 x 200 mm.
13L feminine hygiene container for sanitary products. Suitable for freestanding use or wall mounting. Hygienic design for easy use and maintenance. Also available in black (1064038).
Three modules of the bubble surface mat can be linked together to cover any shaped area. Raised bubbled surface to stimulate blood circulation. Soft and sturdy rubber material offers comfort from cold hard concrete floors. Thickness: 14mm