BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 27 cm.
Gas suit in butyl The suit has fixed boots size 46 and gloves. The pressurized air device is worn outside. The suit comes with a 3S full face mask and a long gas-tight zipper that goes over the head. Suitable for LA96 PF lung governed demand valve and adapter for LA96 ASen AUTOMAXX. Harness mask on the inside. Perfect seal due to integrated mask. Sizes: Universal.
Rescue fork extendible to 4.8m to work from a distance, and allow a person who has fallen descend with a fall-block Ultra-lok RSQ. The descent button can be operated remotely.
Hygiene set for Peltor X5 earmuff.
Hygiene set for Peltor X3 earmuff.
Batteries 3AAA alcaline for head and helmet light VIZION I ATEX (1016736)
Descent and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Winch for descents or rescue. Max load 204kg. To be used in combination with Davit-system or AM100 tripod. Handle to be used in 2 different ways (reduction 4 and 9:1). Best used in combination with suspension harness. To be used in confined spaces.
Very robust fall-prevention device, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Polypropylene ISO Safety Sign - Emergency exit (right)
Kit with ABS holder in white and red letters. 10 cards in polypropylene for ladder inspection. 1 permanent marker. All marking in FRENCH.
Kit with ABS holder in white and red letters. 10 cards in polypropylene for forklift. 1 permanent marker. All marking in DUTCH.
Aluminium 34L bottle of testing gas CO 100ppm in oxygen.
Aluminium bottle of 58 liters with 2 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%) in N2.
Yellow fire safe cabinet with exterior in epoxy-steel and interior with light-chemical resistant, melamine plastic finish. In the bottom of the box, there are 4 levelling feet to cope with an uneven surface. At the top of the cabinet, there is a connection point for earthing. Joints, seams and vents close automatically in the event of fire. On the outside, there are symbols and hazard signs (ISO 3864). interior : 2 stainless steel shelves with 75kg load capacity, 1 stainless steel insert grid with 75kg load capacity, and 1 stainless steel bottom collection bin with 22L collection capacity. Dimensions : 600 x 615 x 1296. Weight :201 kg. Delivery in house is possible on request.
Anti-static absorbent pads on 76 cm x 46 m sized roll, sheets doubly perforated every 46 cm. These heavy-weight perforated pads on a roll are packaged in a box. Available per roll. These pads are made of 1-plymelt- spun polypropylene with 2-ply spun non-woven fabric for extra tear resistance. Can be used for cleaning parts. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 140 litres.
Safety cutter to trim light flash on moulded plastic or laminate. No PPE. Replacement blades: 1023273.
Testgas CO 100PPM aluminium cylinder 112L. Only for use in combination with pressure reducer.
Testgas NH3 25PPM cylinder 34L. Only for use in combination with pressure reducer.
Red backpack in Plan design Space and attachment belts for oxygen bottles of 0.8/1.0/2.0 litres Including inner bags This is a very tough, good quality and easy-to-use bag with ergonomic handles and straps which is very comfortable on the back and shoulders. Dimensions: 48x54x25cm.
100 long plasters measuring 18cmx2cm.
Inox replacement blades for knife Cartonax, straight. Thickness: 0,30 mm. No PPE.
Inox replacement knifes for safety knife Martego. Dimensions: length: 26mm, width: 18,5mm, material thickness: 0,40mm. Package: per 10 pieces.
Anchorage for I-beams ranging from 6.35 to 60.92 cm. Maximum thickness of I-beam: 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Trolley for easy movement of full drum 9009 after testing of emergency shower.
Face shield in black etched metal mesh. Designed for use with V5 visorsystem for attachment on 3M™ G3000 of G22 Series helmet. Ideal for forestry.
Protective foam microphone windsock cuts transmission interference, for use with PELTOR™ Alert, LiteCom Plus, ProTac II, <(>&<)> ComTac XPI Headsets.
White thick cutting mat. Dimensions: 900x600mm. Not PPE.
Gas detector reusable O2 and H2S with shock resistant casing detects H2S, CO, O2 and % LEL simultaneously. Standard with built-in pump, data logging and event logging. Half-yearly calibration required. Power autonomy: Approximately 13hrs. Includes rechargeable batteries and charger. Sensors to be replaced after 2 years Sensors must be switched off. Concentration still visible on the LCD display. Registration of STEL/TWA exposure. Measurement results can be read off via USB cable. Versions with LEL sensor are calibrated for methane. Sensitivity to other explosive, hazardous substances can be set. Alarm values: O2 19.5%-23.5%. Compatible with Micro Dock II.
Free-standing counterweight anchor that can easily be placed on top of a roof to form a point of attachment for one employee. Includes sixteen cast iron weights of 20.3 kg, a base plate, a pole and a D-ring.
Mast adjustable from 1.20 to 2.13 m with rotating head <(>&<)> materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
T-shape base for extendible davit arm.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use; if horizontal: 2-metre anchor loop must be used (Art. 1026475).
Compatible with all ISO certified containers. Provides an elevated anchoring point, allowing free fall requirements to be reduced. Provides a total fall protection solution, even for a single container. No tools or adjustments to container required. Height: 1.25m. Weight: 12 kg. Always combine with fall-block.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for extremely sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Safety line, 2 metres comprising belt with integrated shock-absorber. With 2 standard carabiner hooks. Hooks tested in such a way that the safety line may be positioned around a structure if the hook opening is insufficiently large. A combination of anchor loop and safety line is thus created. Serves as connection between anchor point and harness. With smaller, robust EZ shock absorber that provides shorter braking distance.
Double safety line, 2 metres comprising belt with integrated shock-absorber. With 2 standard carabiner hooks. Hooks tested in such a way that the safety line may be positioned around a structure if the hook opening is insufficiently large. A combination of anchor loop and safety line is thus created. Serves as connection between anchor point and harness. With smaller, robust EZ shock absorber that provides shorter braking distance.
8-layer gauze pads measuring 5X5cm. 100-item packs.
* Anti-fatigue tiles Fatigue step* Super comfortable interlocking tiles in nitrile and rubber with openings in two variants* Resistant to temperatures of 160°C* Individual tiles, easy to move* In line with slip resistance EN13552 Category R10* Optional: sloping edge in yellow or black* Product height: 16 mm
• Effective anti-fatigue mat available in two variants: 1. Bubble mat (100% natural rubber) 2. Bubble mat Nitrile (75% natural rubber/25% nitrile) The addition of nitrile ensures excellent resistance to oils and chemicals. Both variants have a raised, bobbled surface to stimulate the blood circulation• Available as complete mats or interlocking parts for longer mats• Product height: 14 mm
* Durable diamond surface resistant to PVC flooring* Self-cleaning top layer provides resistance to many industrial chemicals* With bright yellow edges* Supplied with sloping edges* Product height: 14 mm
* Durable diamond surface resistant to PVC flooring* Self-cleaning top layer provides resistance to many industrial chemicals* Supplied with sloping edges* Product height: 14 mm
* Raised ribbed surface for more grip* In line with slip resistance DIN 51130* Fire Resistant according to DI 54332 (B2)* Product height: 9 cm* Also available as Otthomat Safety ribbed with bright yellow slanting edges
Crepe bandage with red edging. Dimensions: 5cm x 4m
Plastic spill tray with grid, handles. Tray capacity: 250 liter. Weight:30kg. Carrying capacity 1250kg. Dimensions: 1380x1290x280mm. Transportable with reach truck. Convenient for stocking and handling of dangerous and chemical goods.
Fall-stop device with 2 metre flame retardant strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Different fingers, hand, foot, coarse-knit, highly elastic, for fast and easy fixation of all types of wound dressings, also for applying occlusion foil. Moulds smoothly to all body shapes, does not pinch. Can be cut anywhere without the tear running. Ladder-free Made of thin rubber thread and wrinkled yarn bi-elastic 71% polyamide, 29% elastodene, free of optical brighteners can be washed and sterilised (A 121°C).
Absorbent pads, packaged separately. Box of 60.
Spray can made of stainless steel. This can is useful for safely dampening cleaning rags, sponges, etc. with flammable or environmentally harmful liquids. A spring-operated PE pump system pumps the liquid out of the can. The spray stream is adjustable. Capacity: 2 litres. Dimensions: W 160 x H 305 mm.
Ergonomic gel, wrist-rest provides comfort and support for wrist pressure points to eliminate pressure points - Stylish, transparent gel adds colour to your workplace - Stain resistant, easy to clean with a damp cloth. No PPE.
Keyboard palm-rest soft foam pad (memory foam) - Saphire soft foam cushion offers exceptional comfort for your wrist and never loses its shape - The soft foam cushion adapts to your wrist -Redistributes pressure points and ensures a good position of the hand for typing and using the mouse. No PPE.
Compact TFT/LCD monitor stand Minimum desk space, maximum comfort - Suitable for screens up to 14 kg or 17" - Modern design matches the style of flat TFT/LCD screens - Height can be adjusted from 7.6 to 11.4 cm - Elevation can rotate 45° so others can view the screen - Including paper tray. Dimensions: 296x440x100mm. No PPE.
Smart Suites™ Slim-line slim backrest - Graphite slim design that suits contemporary office chairs - The backrest can be placed at the correct height to suit individual needs - Soft material and stitched seams for a modern look - Adjustable strap to keep the backrest in place - 1 year warranty
The I-Spire™ monitor stand raises your screen to eye level and reduces stress on your neck and shoulders. The modern and stylish design fits in any office or home environment and matches other items from the I-Spire Series perfectly. Suitable for screens up to 11 kg. No assembly required.Dimensions: 127x228x508mm. No PPE.
Testgas NO2 5PPM aluminium cylinder 34L. Only for use in combination with regulator 1015148.
Handy carrying strap for Twig around the neck. Man down alert may react differently by using this lanyard.
Ladies poloshirt short sleeves in 50% cotton/50% polyester, 180 g/m² piqué. Full-fashioned version with side splittings. Very durable, color- and form retaining. With neck tape and 3 buttons closure. Available sizes: XS-3XL. Available colours: Red, Royal Blue, Dark Grey, Anthracite Grey, Navy, Black, White. No PPE.
The 6-position battery charger organizing stand for Adflo battery chargers provides the ability to charge six batteries at the same time (you still need individual charger per battery). Saving both time and hassle. Compatible with legacy NiMH batteries and the new Li-ion batteries. Flexible installation: either mount on wall or stand-alone.
Men's jacket in 65% polyester/35% cotton, 245g/m². Press stud closure under flap, 2 big and 1 small breast pocket with flap, adjustable waist, hi-vis accents. Available sizes: S-3XL. Available colours: Grey/Hi-vis orange, Navy/Hi-vis yellow. No PPE.
