BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Fall arrest device Rebel 12 meters galvanized steel cable with integrated shock absorber. Plastic housing. Stops any vertical falling movement almost immediately. Serves as a connection between anchor point and harness. Equipped with ergonomic cable handle and carabiner with fall indicator that allows you to know when a fall has occurred. For vertical <(>&<)> horizontal use.
High shoe in velours leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Safety glasses in dark PC with foam insert and headband. Metal-free frame in which branches are made of of two types of material. Contains an anti-scratch and anti-fog coating.
Single lightweight and quick to deploy decontamination shower. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Dimensions pack size: 120x70x45cm. Weight: 60kg. Dimensions when deployed: 234x310x260 cm.No PPE.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.
Gas filter AX protects against orgnaic gases and vapours such as solvents with a boiling point lower than +65°C. To use with half and full face Sundstrom masks.
Gas filter ABE2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Fully automatic blade retraction in a robust handle in aluminium, for left- and right- handed persons. Simple and safe blade replacement. Blade can be used on both sides. Cutting depht: 17mm. Replacement blades: 60099 (1021313). No PPE.
Water gun for use in inflatable deconatmination shower. No PPE.
Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in Impulse Foam/rubber, resistant to 300°C. Removable, polyurethane insole with textile layer. Sizes: 36-47.
The large headrest is a replaceable part that only replaces the headgear headrest when the original part becomes worn or damaged during use.
Low shoe glove in water repellent black Matryx multi-fibre. With a carbon fibre 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable textile and insole in polyurethane foam. Sole in EVA/Vibram Litebase, resistant to 300°C. Sizes: 38-48.
Your ear defenders are always close to hand with the neck cord. The clothing clip reduces the chance of losing your ear defenders. C omfortable due to soft silicone material. Safe because the cord is released from the ear defenders if it catches on something. Easy to attach and remove from your ear defenders.
• Affordable BLS manikin • Robust and reliable • Realistic chest compression training • Visualization of compression depth • Ambu Hygienic system for mouth-to-mouth and mouth-to-nose resuscitation • Ventilation with a respirator bag is possible • Placing Guedel tubes (when using Guedel face masks) is possible • Realistic ventilation resistance • Correct ventilation volume can be checked • Visible expansion of the chest during ventilation • Closed hull • Easy for AED training
Cederroth Soft Foam Bandage Beige 4.5 m acts as both a plaster and a bandage, and is suitable for minor wounds. Easy to apply on fingers, hands, arms, toes, feet and legs etc. Suitable for all kinds of minor wounds in hot, cold, wet or dry conditions and will stay in place in water.
A general purpose safety glove made of 13gge HPPE fibers with black PU coating on the palm. Guarantees all-day comfort. Suitable for fine work with limited cutting risk. Sizes: 6-11. Complies with: EN388:2016 4.X.4.2.B
Flame-retardant dungarees with a thin lining, so that they comply with electric arc IEC 61482-2 class 2. Adjustable suspenders with concealed fix-lock closure and elastic at the back. Chest pocket with flap and key ring. inner pocket. Side pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket and concealed key ring. ruler pocket. Pre-shaped knees with height-adjustable knee pockets on the inside. Completely metal-free. Quality: Tera TX, 260 g/m². Available colors: Navy. Available sizes: 44-64, 146-156, 96-120 SCA. Complies with: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 2, ELIM: 15.0 cal/ cm², ATPV: 18.0 cal/cm².
The Magna-Grab is a multi-purpose, multi-use magnetic tool for magnetic material handling and retrieval. The Magna-Grab comes with an eye bolt in the handle so it can serve as an effective tag line anchor point where one may not exist. When a tag line is attached it can also be lowered down into hard-to-reach areas for retrieval of dropped steel objects 100 lbs or less.
Welding glass in mineral glass. Dimensions: 90X110mm.
Dispenser with wallbracket for Soft Foam Bandage 4,5 meter x6cm. Comes with Cederroth Soft Foam Bandage Blue 6cm x 4,5 m. Integrated cutter for quick and easy application of Soft Foam Bandage. Can also be used standing on table if wall bracket is removed. Refill packs available in 3 different colours; blue, beige or black. Clear instructions.
Cap B010 with adjustable size for a perfect fit. Quality: 65% PES, 35% Cotton 190g/m².
Beacon to determine the location data of lone workers, wearing an emerit device, in distress at indoor locations where GPS does not work.
The 3M™ Premium 4-Point Chin Strap X5-P4PTCS1 is an optional extra for the 3M™ SecureFit™ X5500 Series Safety Helmets. The adjustable chin strap has a magnetic buckle and replaces worn or damaged parts. No PPE.
Fleece jacket in high vis: • spacious front pockets with zip • inside pockets • thumb grip on the cuffs • YKK zipper in the front Quality: 100% polyester. Available sizes: S-4XL. Available colors: Hi-Vis yellow / black and hi-vis orange / black .. In accordance with: EN ISO 20471 class 3.
Successor to the P7, excellent light quality, beam range and burn time ideally matched to the energy source, works on 4 AAA alkaline batteries (included) and easy to operate with the end cap switch.
Circular work sock. The comfortable terry footbed provides optimal comfort. You don’t feel the toe seam. The reinforced heel and toe are added for protection and longer lifetime. Composition: 39% Recycled cotton, 31% Recycled polyester, 24% Polyamide, 6% Elastane. Sizes: 35/38, 39/42, 43/46, 47/50.
Innershoe, which consists out of a multi-layer textile with membrane. Membrane absorbs wound exudate and doesn't transmit it to the outer shoe. Is white for discovering wounds. Less seams, removable and washable at 60°C. Sizes: 40-48.
Belt in brown leather. Adjustable to max 115cm.
The 3M™ Premium 4-Point Chin Strap X5-S4PTCS1 is an optional extra for the 3M™ SecureFit™ X5500 Series Safety Helmets. The adjustable chin strap has a synthetic buckle. No PPE.
Sweatband removable for cleaning. Fits 3M SecureFit™ safety helmets, series X5000 and X5500. No PPE.
The 3M™ Short Visor X5-SV01-CE is molded from polycarbonate and features a scratch-resistant anti-fog coating. The visor is designed to fit 3M™ SecureFit™ X5000 and X5500 Series safety helmets.
Face shield in black woven stainless steel with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 70%.
Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity <(>&<)> tactility versus double gloving. Excellent dry <(>&<)> wet grip enhance dexterity and reduce hand fatigue. Cuff can be folded to act as a gutter to prevent chemicals running down the arm.
Face shield in grey polycarbonate, length 340mm. For use on EVO5 safety helmets. Marking: 1 B 8-2-2.
Green boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
High shoe S3 in waterresistant black full grain leather with 200J synthetic toe cap and steel antiperforation sole. Lining in breathable textile. Sole in PU/Rubber. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-50.
Harness with two attachment points: on the back and on the chest and quick release buckles. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Polycarbonate replacement spectacle, for the EVO VistaLens helmet.
Multinorm safety helmet for working at heights, industry and cycling. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Head circumference 52–58 .According to EN 397/EN 12492/ EN 1078 .
Multinorm safety helmet for working at heights, industry and cycling. Light ABS helmet shell offers a high level of protection and durability. The 6-point textile suspension offers optimal fit and comfort. Euroslot adapters (30 mm) on the side for fitting earmuffs. Head circumference 59–63cm .According to EN 397/EN 12492/ EN 1078 .
Retractable telescopic pole of glassfiber to attach the rescue line to the harness of a fallen person. To combine with carabiner 1056763 and the evacuation kit 1056761 in order to save a victim without to descend yourself. The snap closure is held in an open position. Lenght: 0,75 - 3m. Comes with a transportation bag.
High shoe in velours microfiber. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Coverall – CTL428CS • Zipper closure • Attached hood • Tunneled elastic on wrists (with thumbloops), ankles, and back half of waist Case Pack: 25 Available sizes: M - 3XL For cleanrooms ISO 4-8 CLEAN MANUFACTURED AND STERILE
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Content size XL: 170 pieces.
Safety helmet with slots for uvex visors, earmuffs and lamps. Side Euroslot adapters (30 mm) for attaching earmuffs. With MIPS technology, which combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Suitable for use by electricians as helmet shell is fully enclosed. Six-point textile band attachment ensures optimal fit and comfort.
The Softshell Luxe Rewear is a comfortable jacket with stretch, which is also water-repellent and windproof. This circular softshell is made of 100% recycled polyester and is part of the Rewear collection: a fully sustainable and circular clothing package. MATERIAL 100% recycled polyester Plain Weave 340 g/m² Available sizes: XS - 5XL Available colours: black - navy - ink - dark grey
The Sweater Rewear is part of the Rewear package: a fully sustainable and circular clothing package. This sweater is made of 60% organic cotton and 40% recycled polyester. Available sizes: XS-5XL Available colors: black, navy, ink, dark gray
Work jacket with chest and side pockets. Fleece lining in the collar. Zip up to the collar with storm flap and chin guard. Adjustable cuffs with velcro. Fluo fabric over the shoulders with reflective bands. Reflective piping on the front and back. Extended back. Quality: 65% Polyester, 35% Cotton, 245 g/m2. Available colours: navy/yellow, black/yellow Available sizes: XS-4XL.
Device for practicing the use of the self-rescuer M20.2 Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Extra mouthpieces available as an accessory.
Extra mouth piece for trainer selfrescuer M20 devices.
This glove combines 3 important elements needed for handling ropes: dexterity, high abrasion resistance, and good grip.
The Komodo is the hi-vis version of our Jasper ECO jacket. Thanks to the use of the Sio-SafeTM Essential Eco fabric, we have switched to environmentally friendly TencelTM Lyocell and Repreve© recycled polyester instead of the regular cotton and polyester. Although the FR-treated fabric is made with 50% recycled material, the jacket offers the same high-quality protection. It is soft, comfortable and breathable. In addition, this jacket is designed for disassembly, which means that it can be easily taken apart after use. Standards: EN 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034 and EN ISO 20471 class 3. Available sizes: 44R - 64R Available colours: fluo yellow-navy
Rechargeable battery for Clean Air motor unit for use with the RJS suit.
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
A safety rope with a detachable and easy to handle floating rope. Floating bag with wide stiffened opening. High visibility color with reflective details. Breaking strength of 10kN.
Splash suit in chemprotex 300 to be combined with Malina motor unit Clean Air (ordered separately). Fitted with a filter mounting nozzle (filter not included) for emergency use in case the motor unit should fail. Sleeve end with glove adaptors. The trousers have fixed socks and straight legs as a boot cover. Sizes: S - XXL.
Breathing twin hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Women's jacket from the HAVEP® 5 safety image+ collection. This jacket meets 6 standards and is made of cotton/polyester/carbon. Quality: 80%/19%/1% cotton/polyester/carbon, 4/1 satin weave + DWR, 280 gr/m2. Available sizes: S-3XL. Available colours: grey/red. Conforms to: EN ISO 11612 A1A2B1C1E2F1, EN 1149-5, IEC 61482-2 APC 1, EN 13034 Type 6, EN 17353 Type B3.
Versatile tactical winter glove designed to enable weapon operation and precise frisking. Slim all-round fit and exceptional dexterity. Windproof and water-repellent durable softshell fabric with fleece liner, TPR reinforcements, touchscreen compatible.
