BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Trousers Fermi Diablo Multinorm: atpv 39 cal / cm; - knee pockets; - side pockets; - back pockets; - thigh pocket. Quality: POLYAMIDE 100%, 330 gr / m². Available sizes: 44-68 BE. Available colors: Fluo yellow / navy. Conforms to: EN ISO 20471 Class 1, EN ISO 11611 Class 1, EN ISO 11612 A1A2B1C1D3E2F1, En 1149-5, IEC 61482-1-2: 2014 Class 2 and EN 13034: 2005 + A1: 2009 TYPE PB [6].
Multinom jacket Fermi Diablo 13242: atpv 39 cal / cm; Elim 33 cal / cm; breast pocket; 2 front pockets. Quality: POLYAMIDE 100%, 330 gr / m². Available sizes: 44-68 BE. Available colors: Navy / yellow. Conforms to: EN ISO 20471 Class 1, EN ISO 11611 Class 1, EN ISO 11612 A1A2B1C1D3E2F1, En 1149-5, IEC 61482-1-2: 2014 Class 2 and EN 13034: 2005 + A1: 2009 TYPE PB [6].
Softshell haute visibilité 403021 : poignet côtelé connectable; sacs scellables; Col bomber côtelé; Dos allongé. Tailles disponibles : XS-6XL. Coloris disponibles : jaune fluo/marine, orange fluo/marine, rouge fluo/marine. Conforme à : EN ISO 20471 Classe 2.
The polo sweater bicolor with breast pocket for ladies from the Tricorp Workwear label is a popular item. This durable two-tone polo sweater is shape and colorfast thanks to the combination of cotton and polyester. Thanks to an elastic hem at the bottom, it protects better against wind than other similar sweaters, the inside is roughened for extra comfort while wearing. Fabric: 60% cotton / 40% polyester, American fleece, 280 g / m². Available colors: navy, black / gray, black / red, black / orange and black / green. Available sizes: XS-3XL.
Semi-automatic safety knife for right-handed and left-handed use Stainles Steel blade and handle without paint. Metal detectable, for use in food and pharma industry. Handy Format no tools needed to replace the blade
Stainless steel spare blades for KS101SS. No PPE.
Harness with 2 attachment points on the back and chest. Breast anchor point by means of 2 loops and back attachment point by means of D-ring. Equipped with a positioning belt with 2 D-rings on the sides. Adjustable leg and shoulder straps. Designed for extreme conditions where high voltage is a risk. Bands made of heat resistant Nomex / kevlar and equipped with dielectric quick-release fasteners. Available in S / M, L / XL or XXL.
Face shield against arc flash for the electrician with continuous flap. EC type testing according to EN166-170 and GS-ET-29 (CE0340) Arc class 1. (4kA-0.5sec-350mm) light transmission >75% = class 0 Face protection against electric arcs during short-term switching work and other work that is carried out under voltage, such as in cable distribution boxes, house connection boxes and when changing kWh meters. Inserting and pulling knife cartridges, manufacturing branch sockets and similar work. This face shield provides no mechanical protection. Window material: 1.5mm thick acetate, Hood material: NOMEX 3T/A.
This flame-retardant lining is fit for the Heflin rain jacket. The lining is made of 100% polyester with zip closure and slitopening to inside pocket of rain jacket. Available colors: navy.
Flame-retardant and anti-static work jacket with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX, 260 g/m². Available sizes: XS-4XL. Available color: navy. Complies with: EN ISO 16112 A1+A2 B1 C1 E1 F1, EN 1149-5, EN 13034-6, EN ISO 11611 Class 1, IEC 61482-2 Class 2 ELIM: 15.0 cal/cm² ATPV: 18.0 cal/ cm²). PPE category 3.
Hygiene set for hearing protector VERISHIELD VS110D/VS110M
Hi-Vis work jacket. Zipper with press studs. Extended back. Chest pockets with flap. Key ring under the flap of the right breast pocket. Vertical zip pocket. Sleeve pocket. Side pockets. Adjustable waistband and cuffs. Two inner pockets. Quality: 54% cotton / 46% polyester, 260 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XS-4XL. Complies with: EN ISO 20471 class 2.
Flame-retardant Hi-Vis rain coverall in PU quality with quilted lining: • Fixed hood in the collar; • Concealed zipper; • Elastic at the waist; • Two breast pockets; • Two leg pockets; • Tool pocket on the leg; • Sleeves with wind stoppers; • Zipper and storm flap on the legs. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Lining: FR quilted cotton lining with polyester filling. Available colours: fluorescent orange/navy and fluorescent yellow/navy. yellow/navy. Available sizes: XS-5XL. Complies with: EN 343 3.1., EN ISO 20471 Class 3, EN 1149-5 and EN ISO 14116.
Helmet shell for 3M ™ Speedglas ™ automatic welding mask G5-02. Without headband, front or anti-glare cassette.
Flame retardant work trousers with extra visibility. With swept back side seams and double layering at the front for extra heat protection. The trousers are made in a strong and supple satin, specifically developed for work with zinc and chemicals. Side pockets. Back pockets with flap. Ruler pocket with flap. Contrasting seams. Quality: Apex 300 gsm. Sizes available: 44-64, 146-156, 84-120 SCAND. Available colours: navy/fluo yellow. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 9.4 cal/cm² ATPV: 12.0 cal/cm².
Women's softshell with zipper, 2 set-in side pockets with zipper, 2 set-in chest pockets with zipper, of which the right breast pocket has a D-ring for badge holder, pen pocket on sleeve, adjustable waist by means of a zipper. drawstring, breathable, windproof and water repellent, sleeves adjustable by means of adjusters velcro, storm flaps, extended back, reflective piping, chin protector. Quality: 92%/8%, 100%, 100% | polyester/elastane, PU membrane, polyester | 3-laminate | 320gr/m². Available sizes: XS-4XL. Available colours: Indigo Blue and Charcoal Gray.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 42 inches. Material: plastic.
Standard battery for PX5. Usage duration depends on filters used. Charging time: 5h.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with RPB PX5 motor unit or on compressed air line. For medium to heavy applications. Respiration, face and head protection in one. Includes: air hose, and FR face seal.
Breathing hood in Tychem 2000 together with a bump cap and breathing hose. To combine with the motorunit PX5 or with compressed air system.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, cover for gas filter, flow meter, battery and charger and a pack of prefilters. NPF: Depends on hood used.
Unisex sweater ESD in accordance with IEC 61340 - 4 - 9:2016.
Synthetic combat glove, with kevlar protection elements on the knuckles and ventilation on the top of the finger. Water resistant, Touch screen on the palm and all fingers. Chrome free. Suitable for public order and police services. Sizes: 7-12. Complies with: EN388:2016 3.1.3.2.X.P, EN407 X.1.X.X.X.X
The Compact Supreme 275 Heavy Duty Wipe Clean Lifejacket is ideal for heavy duty commercial fishing applications such as crab and lobster fishing. She is also suitable for construction workers. Colour: Orange. Buoyancy: 294N In accordance with: EN ISO 12402-2 : 2006 +A1 : 2010 for inflatable lifejackets performance level 275 EN ISO 12401 : 2009.
Hi-Tide HAMMAR inflatable life jacket: • Durable waterproof fabric • Double shoulder straps • Zip fastening cover • Stainless steel interlocking belt buckles • Adjustable waist belt • Detachable crutch strap • Integrated deck safety harness approved to EN ISO12401. Color: Red Buoyancy: 294N
Ultrafit horseshoe design, 275N, double chamber inflatable life jacket. Ideal for heavy offshore work with bad weather clothing and heavy equipment. - In accordance with: SOLAS, EN ISO 12402-2 : 2006 +A1 : 2010 for inflatable lifejackets performance level 275 and EN ISO 12401 : 2009.
Hi-vis rain trousers Batur: Narrowing at leg end by means of press studs; Elastic waist. Quality: 100% polyester knit with PU coating; ± 170 gsm. Available sizes: S-3XL. Available colours: Fluo orange. In accordance with: EN 343 4:1 and EN ISO 20471 class 1.
Slim, elegant, user-friendly: thanks to its anti-slip surface and length of 163 mm, the P6 flashlight is easy to hold. In addition, you can easily focus the light beam with just 1 hand thanks to the Rapid Focus technology. The Advanced Focus System allows you to adjust your light beam to every situation so you can always enjoy an ultra-light beam of up to 200 lm. Scope of delivery: 2x AA batteries, nylon pouch, wirst strap.
A2P3 filter in plastic housing for 3M Secure Click half face masks. Protects against organic gases and vapours and toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%.
Gas filter ABE1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Filter holder.
Headband suitable for Speedglas G5-02 welding helmet. Includes attachment set. Not separately approved as PPE.
Breathing hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Fully inflatable life raft for 6 people, light and easy to carry. Exceptionally stable, can be used at low tide. Can be quickly inflated. Suitable for rescue on water. Dimensions: 397 x 117 x40 cm. Dimensions when folded: 88x35x30 cm. Weight 20.5 kg.
Lightweight and quick to deploy shelter. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Dimensions: 400x400x250cm. Weight: 58kg.No PPE.
The 3M™ E-A-R™ Flexible Fit HA earplug has a patented design, which ensures that it is washable and reusable. Thanks to the soft foam tip and flexible stem, it can be easily inserted into the ear with one or two hands. The foam tip molds to the unique shape of the ear canal and helps block out sound. The Flexible Fit earplugs are especially suitable for activities that require gloves or cause dirty hands or situations where only one hand is free to put the earplugs in. Suitable for universal noise. In accordance with: EN 352-2 (SNR 35 dB with 2 hands inserted, SNR 30dB with 1 hand inserted).
Hygiene set for hearing protector VERISHIELD VS130D/VS130M
Charging cradel with charger for 5 led lenser lamps. No PPE
Kit of level dependent rechargeable earplugs. They help protect your hearing, and can help improve situational awareness and communications in challenging environments. Intuitive one-button operation. Integrated with state-of-the-art level-dependent technology, the LEP-100 helps provide hearing protection in noise and situational awareness in quiet environments.
Rescue and descent device with rotating wheel and 9.6 mm semi-static kernmantle rope for rescue or evacuation of you, a second person or any victim from height. The hand-wheel serves to lower or retrieve victims, can be used with an electric screwdriver. Maximum weight for 2 persons: 225kg. Suitable for rescue operations in hard to access locations and heights.
The new 3M™ PELTOR™ ComTac™ VII headset is designed to allow for dual hearing protection. It can be used in combination with 3M™ PELTOR™ TEP-300 earplugs, or passive earplugs. A new headband design helps to make transition between rail mounted systems and headband easier. It can also help to improve comfort when worn under a ballistic helmet. Natual Interaction Behavoiur (NIB), helps to improve close range face-to-face communication in steady state noise environments.
Utilizing near field magnetic induction, the 3M™ PELTOR™ System Control Unit helps to improve cable management through cord-free connection to the 3M™ PELTOR™ ComTac™ VII Headset, and 3M™ PELTOR™ Tactical Earplugs, TEP-300. There is also a port for an optional wired connection to the 3M™ PELTOR™ ComTac™ VII Headset. The SCU is equipped with three com ports for radios and intercom systems, and is designed to handle multiple radios with multiple channels. The SCU is also available with Bluetooth® technology. The SCU can be remotely operated via a wireless remote control unit (RCU). It is designed to be mounted on a picatinny rail, but can be placed elsewhere. Besides using the remote as a push-to-talk PTT, it can also be used to adjust the volume level of the environmental listening or radio. No PPE.
Flame retardant jacket E2274-106: Spread collar Closure by 5 covered snap buttons 1 patch breast pocket One inside pocket on the right 2 lower patch pockets with flaps Turned-back cuffs Wider flaps. Composition: 52% cotton, 38% type-F acrylic, 10% satin flame-retardant viscose - 340 gr/m². Available sizes: 0-6 FR. Available colours: Navy. Complies with: EN ISO 11612 A1/B1/C1/D2/E2/F1 and EN ISO 11611 class 1.
Earmuff helmet WS Alert X with Bluetooth and level dependent function (surround). The Bluetooth® headset with noise-cancelling stick microphone connects to your mobile phone for hands-free calling and streaming in noisy environments. The headset helps protect you from dangerous noise while promoting your situational awareness through the level-dependent function for listening to the environment. The headset also syncs with a mobile app, allowing users to easily set up and customize the headset. SNR: 30dB. In accordance with: EN352-3.
Earmuff WS Alert XPI with built-in FM radio receiver, Bluetooth and level dependent function (surround). The Bluetooth® Multipoint Headset with Noise Canceling Microphone connects to a mobile app to make it easier to set up and customize the headset while wirelessly connecting two Bluetooth devices, such as a cell phone and a walkie-talkie. The headset helps protect you from dangerous noise, but also makes it easy to use both hands free on the phone in noisy environments. SNR: 30dB. In accordance with: EN352-1.
Super-light safety helmetwith short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Anti-riot gloves for use in a law enforcement environment during demonstrations, events, etc. Perfect blend between dexterity and pr otection. 360° heat resistant and flame retardant kevlar lining and cut resitant. Sizes: 6-14.
Flame retardant long underpants for women. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Compliant: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, IEC 61482-2: APC 1, ELIM: 4.6 cal/cm² ATPV: 5.3 cal/cm².
Flame retardant ladies T-Shirt with round neck and long sleeves. Extended back. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Complies with: EN ISO 11612: A1+A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, TRANEMO SKINSAFE, ARC RATING: 5.5 cal/cm².
Multinorm bib and brace Viana: Front fly with zipper; chest pocket with zip closure; 2 patched slanted pockets; 1 back pocket; 1 patched thigh pocket; 1 ruler pocket; 2 side slits; Knee pockets; 2 elasticated adjustable braces; Bib in front and back; Closure by 2 hidden buttons at the sides. Available sizes: 44-64R. Available colour: Hi vis orange/navy.
Women's inherently flame retardant T-Shirt with increased visibility and 20% recycled cotton. Round neck. With heat seal reflection. Quality: Cantex Jersey AT, 180 gsm. Available sizes: S-2XL. Available Color: Navy/Yellow. Complies with: EN ISO 14116 and EN 1149-5.
Arm protection for riot police forces. Sizes: 0 (XXS-S) / 1 (M-L) / 2 (XL-XXXL)
Flame retardant and anti-static t-shirt FR33: Protects against radiant, convection and contact heat; Moisture-wicking and breathable material; Concealed breast pocket; sleeve pocket; Button closure. Quality: Bizflame Knit Antistatic: 99% Cotton, 1% Carbon Fiber 237g/m². Available colours: Gray and navy. Complies with: EN ISO 11612 A1 + A2, B1, C1, F1, EN 1149 -5 and IEC 61482-2 IEC 61482-1-1 ELIM 13cal/cm².
Fully inflatable life raft in PU for 3 people, light and easy to carry. Exceptionally stable, can be used at low tide. Can be quickly inflated. Suitable for rescue on water. Dimensions: 256 x 117 x40 cm. Dimensions when folded: 88x35x30 cm. Weight 17 kg.
