BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Clean water tank 1000L.
Hose 1m to connect 8 bar regulator with MFC inflatable shower or tent.
Low, black shoe made out of full grain leather. Special antislip sole made out of rubber. Removable insole made out of PU for higher comfort. Sizes: 35-42. No PPE.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW Clip4 Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Synthetic leather glove, Unlined, 0,7 mm, Microthan®+, Diamond grip pattern, Nylon, Cat. II, Black, grey, yellow, Chrome free, Reinforced seams, Velcro®, for assembly work . Conform EN 388:2016: 2.1.2.1.X
- All sizes comply with EN ISO 20 471 - Suspender trousers with raised back - Suspender trousers 2 layers + fully lined - Wide loom band - Closing the sides by means of invisible push buttons - Fly with zipper - 2 side pockets on the front with +/- vertical insertion - 1 stitched back pocket with flap closing by means of velcro's (H14xB16cm) - Bite bag with flap closing by means of velcro's - Closing the meter pocket with the flap using velcro - 2 reflection bands per pipe - 1 reflection band on waist front and back - 2 knee pockets with flap closing through velcro's Quality: PES 100% + GORE PYRAD®. Available colors: Fluo yellow / navy. Available sizes: BE 40 - BE 60.
The hooded ladies sweater has two pockets. These pockets can be closed with a zipper. The inside of the sweater is gebrusht several times for extra comfort and warmth. The advantage of the hooded sweater is that it provides additional protection through the hood on cold days. Quality: 80% cotton / 20% Polyester. Available sizes: XS-XL. Available colors: Navy, Black, Gray, Bordeaux.
Providing incredible EN388: 2016 level F cut resistance (ANSI 105:2016 A8), the glove is light and dexterous able to be worn for long periods of wear. An extended cuff provides added protection to the wrist area and all gloves in the food range can be industrially laundered to the ISO 15797:2018 standard. EN388: 2016 level F cut resistance (ANSI 105:2016 A8); EN388: 2016 4 × 4 X F; New yarn structure delivers improved grip and mechanical performance; Permanent antimicrobial component; Free from glass fibre to prevent product contamination; Tested to EN ISO 15797 industrial wash test to withstand x50 washes at up to 85°c and drying up to 70°c with no effect on cut resistance; Colour coded to prevent cross-contamination; Designed for knife hand use; Ambidextrous.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Seamless insulate lined glove with water repellent natural rubber latex on the full glove, with a dual rubber latex coating with rough finishes surface on the palm. The dual coating provides high abrasion resistance and longer usage. Designed to protect at temperatures down to -30°C for short or intermittent contact and to contact temperature up to 250°C for 15 seconds. Anatomical hand shape design and high visibility orange color. Sizes: 7(M)-10(XXL).
Floating Mullion trousers: - Fully waterproof + highly breathable outer fabric + taped seams - Anti-flushing straps to legs with easy grip pull tabs. - Zip closure under double flap with touch and close fastening - 2 inset hip pockets with WP zip - Adjustable elasticated shoulder braces - Reinforcement panels added to knees and seat area - Zip closure + gusset at leg for ease of donning over boots - Elasticated waist in the back - Fixed flotation lining stops at knee level Available sizes: S-3XL Available colours: Hi-vis yellow/black.
The plantar fasciitis brace is made from a high-tech compression material that provides the foot and the sole of the foot with gradual compression. The material consists of 60% polyamide, 20% nylon and 20% elastane. The various compression zones relieve the sole of the foot, support the transverse arch, reduce local swelling and promote blood circulation and recovery. It can be used both during the day and at night. Available sizes: S 35 - 39 M 40 - 43 L 44 - 46
Testgas H2S 25PPM aluminium cylinder 34L in N2.
P2 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
Face shield in light green polycarbonate, length 235 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 B 3 8 9.
Classic overalls with collar, 1 stuffed chest pocket with flap, 2 side pockets, closure by means of dived press studs. Quality: Overall in 65% polyester 35% cotton, 210 gr./m². Available colors: navy, royal blue, red, white, bottle green and graphite gray. Available sizes: S-5XL and lengths.
Davit arm with a range of 720 mm, high capacity. Short and long reach davit arm high capacity can only have 1 davit mast extension. Complete davit (mast extension + davit arm) can be used on any fixed or portable davit base high capacity. Authorised SRL and winch can be mounted front or back whether on the universal lower mast or davit mas extension. Can be used for persons as well as loads with a maximum of 205 kg with portable bases, or 340 kg with fixed bases. For fall arrest applications: 2 users (max 140kg max each), for rescue applications: 1 user (max 140 kg max.).
U-shaped base for Davit arm. Width adjustable from 1,2m - 1,9m.
The 3M™ Peltor™ LiteCom is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices. The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 32 dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Bodytrousers in 65% cotton / 35% polyester, concealed zip, 2 side pockets, breast pocket with flap, 2 back pockets, ruler pocket, Cordura® reinforcements, adjustable waistband, hammer loop, D-ring, reflective details, Cordura® knee pockets, adjustable shoulder straps with Velcro. Available sizes: 44-66. Available colors: Navy, gray and black / gray.
Floor foot for Davit arm to be secured to concrete structures. The flat design ensures that there is no danger of stumbling. When used together with davit arm, complies to EN795 type A, EN1496 Class B
No PPE.
Cap for fixed base davit arm. No PPE.
Counterweight base high capacity with cart, as base for davit arm.
This brace gives a light support and unloading of the patellar tendon. Sizes: Universal. Colors: Black.
Cleanspace combined filter ABEK1P3 for protection against airborne particulate (dust, mists, and fumes), organic, inorganic gases or vapours, solvents, (boiling point >65°C). Weight: 200g In line with EN12942
A premium hi-vis trouser designed and cut specifically for women to give a flattering fit. Features include side waist elastication for extra freedom of movement and an excellent combination of thigh and back pockets for secure storage. Quality: 65% polyester / 35% cotton. Available sizes: XS-XXL. Available colors: Fluo yellow and fluo orange. Complies with: EN ISO 20471 class 2.
Replacement neoprene hood T-airline without neck seal. (for airhood 1055212)
Replacement helmet with airduct and airduct indicator.
Spare part for the neoprene T-airline hood 1055212
- Stainless steel - additional fixation of the KSW on the back wall is recommended - Height: 15cm
Replacement trapezoid blade deep-edged for safety knife Secunorm 500 19MM (1042213). Dimensions: 53mm x 19mm. Material thickness: 0,63mm. Packed per pc.
2-Layer FR Hook <(>&<)> Loop Mouth Piece: Adjustable face protection that fits perfectly with an FR winter liner.
Flame retardant Hi-Vis sweater with short zipper at the front. Ribbed cuffs and hem. With heat seal reflection. Quality: Cantex Dual 320, 320 g / m², LOI: 28.3%. Available sizes: XXS-4XL. Available color: Fluo orange. Complies with: EN ISO 11612 A1B1C2F1, EN 1149-5, IEC 61482-2 Class 1 (11.3 cal / cm²), EN ISO 20471 class 3.
OTG goggles reinforced with soft foam cushion , visible light transmission: approx. 65% ,color: light gray 900-<(><<)>1025 DIRM LB7 LV CE (OD7+) 1025-1400 D LB7 IR LB8 M LB9 LV CE (OD9+) >1400-3000 D LB5 IRM LB4 LV CE (OD5+) >3000-11500 D LB5 I LB4 R LB2 LV CE (OD5+)
Innovative fit-over frame, flexible temples , visible light transmission: approx. 20 % ,color: brown 180-315 DIRM LB3 >315-532 DIRM LB3 637-661 DIRM LB3 755-<(><<)>940 DIRM LB1 940-1064 DIRM LB2 >1064-1100 DIRM LB1 529-532 RB3 >532-538 RB2 >538-545 RB1 620-<(><<)>631 RB1 631-<(><<)>637 RB2 637-644 RB3 656-661 RB3 >661-666 RB2 >666-674 RB1
goggle (OTG) with foldable temples , visible light transmission: approx. 2 % ,color: grey
goggle (OTG) with flex temples, visible light transmission: approx. 2 % ,color: grey
With the S3100 Icon and label printer you can create a comprehensive print assortment of pictograms and labels for more security and efficiency in the workplace. Safety icons, floor marking, 5S labels, Lean labels, labels for the identification of racks, doors, stairs, bins, desks and chairs, and CLP labels for identification chemicals can all be printed on site with the S3100.
Innovative fit-over frame, flexible temples , visible light transmission: approx. 40 % ,color: orange
